CD/DVD привод пользую только при установке системы, остальное время его не трогаю. В fstab
Код: Выделить всё
# dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Sun May 1 23:27:47 MSD 2011
yura@adios.spb.ru:/usr/obj/usr/src/sys/ADIOS i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2394.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2053648384 (1958 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7df00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SiS 661 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xd8000000-0xdfffffff,0xd7fe0000-0xd7ffffff irq 16 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <SiS 5571 USB controller> mem 0xd7efc000-0xd7efcfff irq 20 at device 3.0 on pci0
ohci0: [ITHREAD]
usbus0: <SiS 5571 USB controller> on ohci0
ohci1: <SiS 5571 USB controller> mem 0xd7efd000-0xd7efdfff irq 21 at device 3.1 on pci0
ohci1: [ITHREAD]
usbus1: <SiS 5571 USB controller> on ohci1
ohci2: <SiS 5571 USB controller> mem 0xd7efe000-0xd7efefff irq 22 at device 3.2 on pci0
ohci2: [ITHREAD]
usbus2: <SiS 5571 USB controller> on ohci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd7eff000-0xd7efffff irq 23 at device 3.3 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
sis0: <SiS 900 10/100BaseTX> port 0xd800-0xd8ff mem 0xd7efb000-0xd7efbfff irq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:13:d4:47:3a:ba
sis0: [ITHREAD]
atapci1: <SiS 964 UDMA133 controller> port 0xd400-0xd407,0xd000-0xd003,0xc800-0xc807,0xc400-0xc403,0xc000-0xc00f,0xb800-0xb87f irq 17 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xd7efac00-0xd7efacff irq 19 at device 8.0 on pci0
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:22:82:ca:ee
rl0: [ITHREAD]
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb000-0xb07f mem 0xd7efa800-0xd7efa87f irq 18 at device 10.0 on pci0
miibus2: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus2
xlphy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow
xl0: Ethernet address: 00:10:4b:bc:83:a2
xl0: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 2394476703 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to deny, logging disabled
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <SiS> at usbus0
uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <SiS> at usbus1
uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <SiS> at usbus2
uhub2: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <SiS> at usbus3
uhub3: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ad0: 19092MB <Seagate ST320011A 3.10> at ata0-master UDMA100
ad1: 76319MB <Seagate ST380011A 3.06> at ata0-slave UDMA100
acd0: CDROM <LG CD-ROM CRD-8522B/2.01> at ata1-master PIO4
ad3: 76319MB <Seagate ST380011A 3.06> at ata1-slave UDMA100
uhub2: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.2: <American Power Conversion> at usbus0
GEOM: ad1s1: geometry does not match label (16h,255s != 16h,63s).
GEOM: ad3s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/4bacf1a6ae11855d: geometry does not match label (16h,255s != 16h,63s).
GEOM: ufsid/45bd186547143d45: geometry does not match label (255h,63s != 16h,63s).
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
GEOM: ufsid/45bd186547143d45: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/4bacf1a6ae11855d: geometry does not match label (16h,255s != 16h,63s).
xl0: link state changed to UP
ИЗ за этого программно не ребутится система?