forum.lissyara.su

Код: Выделить всё

cat /etc/ttys

Код: Выделить всё

[20:01:00]# cat /etc/ttys
#
# $FreeBSD: release/9.0.0/etc/etc.amd64/ttys 220154 2011-03-30 08:22:29Z ed $
#       @(#)ttys        5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name  getty                           type    status          comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none                            unknown off secure
#
ttyv0   "/usr/libexec/getty Pc"         xterm   on  secure
# Virtual terminals
ttyv1   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv2   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv3   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv4   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv5   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv6   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv7   "/usr/libexec/getty Pc"         xterm   on  secure
ttyv8   "/usr/local/bin/xdm -nodaemon"  xterm   off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0   "/usr/libexec/getty std.9600"   dialup  off secure
ttyu1   "/usr/libexec/getty std.9600"   dialup  off secure
ttyu2   "/usr/libexec/getty std.9600"   dialup  off secure
ttyu3   "/usr/libexec/getty std.9600"   dialup  off secure
# Dumb console
dcons   "/usr/libexec/getty std.9600"   vt100   off secure

Код: Выделить всё

locale

Код: Выделить всё

[20:01:12]# locale
LANG=
LC_CTYPE="C"
LC_COLLATE="C"
LC_TIME="C"
LC_NUMERIC="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_ALL=

Код: Выделить всё

# cat /etc/rc.conf
hostname="wan.test.by"
defaultrouter="184.158.204.121"
gateway_enable="YES"

sshd_enable="YES"
moused_enable="YES"
dumpdev="NO"

ntpd_enable="YES"
ntpdate_enable="YES"
ntpdate_flags="-u 0.freebsd.pool.ntp.org"

ifconfig_igb0="inet 184.158.204.122  netmask 255.255.255.252"
ifconfig_igb1="inet 10.44.1.202 netmask 255.255.240.0"
ifconfig_igb1_alias0="inet 188.172.182.1 netmask 255.255.255.0"
ifconfig_igb2="inet 10.13.13.13 netmask 255.255.255.0"
ifconfig_igb2_alias0="inet 188.172.188.1 netmask 255.255.255.0"
ifconfig_igb3="inet 10.0.0.4 netmask 255.255.255.0"

firewall_enable="YES"
firewall_script="/etc/ipfw.rules"
natd_enable="YES"
natd_flags="-f /etc/natd.conf"

quagga_enable="YES"
quagga_daemons="zebra bgpd"
quagga_flags="-d -A 127.0.0.1"

named_enable="YES"
ftpd_enable="YES"

Код: Выделить всё

# cat /etc/rc.conf
hostname="ddos.test.by"
defaultrouter="188.172.188.1"
ifconfig_igb0=" inet 188.172.188.29 netmask 255.255.255.0"
sshd_enable="YES"
ntpd_enable="YES"
dumpdev="NO"

Код: Выделить всё

#netstat -w 1 -I igb0