Страница 1 из 1

ASUS Eee PC 1011CX

Добавлено: 2012-12-22 16:02:56
Poruchik
Здравствуйте.

Попытался поставить FreeBSD 9.0 на ASUS Eee PC 1011CX (Intel® Atom™ N2600 (Dual Core; 1.6GHz) Processor; Intel® NM10 Express Chipset; Intel Graphics Media Accelerator 3600).

Сетевая карта определилась сразу. С Wi-Fi/Bluetooth не разбирался (пока неважно). Но вот работа видеокарты (в консоли) немного напрягает.

При вводе команд/текста периодически "пропадают" некоторые символы. "Пропадают" чисто визуально: если перейти (по Alt+Fn) в другую виртуальную консоль, а затем вернутся - вид экрана становится нормальным. В какую сторону мне надо копать, чтобы попытаться эту проблему решить?

На всякий случай привожу листинги:

Код: Выделить всё

uname -a

FreeBSD asus 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012     root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

Код: Выделить всё

dmesg -a

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:15:25 UTC 2012
    root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: Intel(R) Atom(TM) CPU N2600   @ 1.60GHz (1596.40-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x30661  Family = 6  Model = 36  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
  AMD Features=0x100000<NX>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 1019801600 (972 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP/HT): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, 4000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf0e0-0xf0e7 mem 0xdfc00000-0xdfcfffff irq 16 at device 2.0 on pci0
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xdff00000-0xdff03fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8152 v2.0 PCIe Fast Ethernet> port 0xe000-0xe07f mem 0xdfd00000-0xdfd3ffff irq 19 at device 0.0 on pci3
alc0: 2048 Tx FIFO, 5376 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
alc0: Ethernet address: 30:85:a9:01:99:05
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xf060-0xf07f irq 21 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xf020-0xf03f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdff05000-0xdff053ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH7 AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf000-0xf00f mem 0xdff04000-0xdff043ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Realtek ALC269
hdac0: HDA Codec #1: Intel (Unknown)
pcm0: <HDA Realtek ALC269 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Intel (Unknown) PCM #0 HDMI> at cad 1 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9320325AS 0003SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 12471880 Hz quality 1000
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <Azurewave> at usbus4
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ada0s2a [rw]...
Setting hostuuid: 7f1d3400-add6-8149-3d3d-3085a9019905.
Setting hostid: 0xd4ce428d.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 6389383 free (447 frags, 798617 blocks, 0.0% fragmentation)
/dev/ada0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2d: clean, 987790 free (374 frags, 123427 blocks, 0.0% fragmentation)
/dev/ada0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2e: clean, 511864 free (32 frags, 63979 blocks, 0.0% fragmentation)
/dev/ada0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2f: clean, 12330831 free (3527 frags, 1540913 blocks, 0.0% fragmentation)
Mounting local file systems:
ugen3.2: <Broadcom Corp> at usbus3
.
Setting hostname: asus.
Starting Network: lo0 alc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 
	inet 127.0.0.1 netmask 0xff000000 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
alc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=c3198<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MCAST,WOL_MAGIC,VLAN_HWTSO,LINKSTATE>
	ether 30:85:a9:01:99:05
	inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
	inet6 fe80::3285:a9ff:fe01:9905%alc0 prefixlen 64 tentative scopeid 0x1 
	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
	media: Ethernet autoselect (none)
	status: no carrier
Starting devd.
Starting Network: usbus0.
Starting Network: usbus1.
Starting Network: usbus2.
Starting Network: usbus3.
Starting Network: usbus4.
ubt0: <Broadcom Corp Bluetooth module, class 224/1, rev 2.00/5.30, addr 2> on usbus3
kldload: can't load ng_ubt: File exists
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
add net default: gateway 192.168.1.1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp (X related).
Updating motd:.
Starting powerd.
Configuring syscons: keymap cursor scrnmap font8x16 font8x14 font8x8 blanktime screensaver.
Starting sshd.
Starting cron.
Starting default moused.

Sun Dec 23 11:28:50 MAGT 2012
Dec 23 11:28:58 asus login: ROOT LOGIN (root) ON ttyv1

Код: Выделить всё

pciconf -lv

hostb0@pci0:0:0:0:	class=0x060000 card=0x84a91043 chip=0x0bf18086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Cedarview DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:	class=0x030000 card=0x84a91043 chip=0x0be18086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Cedarview Integrated Graphics Controller'
    class      = display
    subclass   = VGA
hdac0@pci0:0:27:0:	class=0x040300 card=0x84371043 chip=0x27d88086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:	class=0x060400 card=0x83ad1043 chip=0x27d08086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:	class=0x060400 card=0x83ad1043 chip=0x27d28086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:3:	class=0x060400 card=0x83ad1043 chip=0x27d68086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family PCI Express Port 4'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:	class=0x0c0300 card=0x83ad1043 chip=0x27c88086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:	class=0x0c0300 card=0x83ad1043 chip=0x27c98086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:	class=0x0c0300 card=0x83ad1043 chip=0x27ca8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3:	class=0x0c0300 card=0x83ad1043 chip=0x27cb8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:	class=0x0c0320 card=0x83ad1043 chip=0x27cc8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib4@pci0:0:30:0:	class=0x060401 card=0x83ad1043 chip=0x24488086 rev=0xe2 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x83ad1043 chip=0x27bc8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'NM10 Family LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci0@pci0:0:31:2:	class=0x010601 card=0x83ad1043 chip=0x27c18086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH7 Family SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none0@pci0:0:31:3:	class=0x0c0500 card=0x83ad1043 chip=0x27da8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'N10/ICH 7 Family SMBus Controller'
    class      = serial bus
    subclass   = SMBus
none1@pci0:2:0:0:	class=0x028000 card=0x20471a3b chip=0x472714e4 rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM4313 802.11b/g/n Wireless LAN Controller'
    class      = network
alc0@pci0:3:0:0:	class=0x020000 card=0x84681043 chip=0x20621969 rev=0xc1 hdr=0x00
    vendor     = 'Atheros Communications'
    device     = 'AR8152 v2.0 Fast Ethernet'
    class      = network
    subclass   = ethernet

Re: ASUS Eee PC 1011CX

Добавлено: 2012-12-24 20:51:48
Poruchik
Оказывается пофиксили в 9.1 - http://www.freebsd.org/cgi/query-pr.cgi?pr=166262&cat=