forum.lissyara.su

Код: Выделить всё

gw# less mpd.conf

default:
        load pptp_server

pptp_server:
        set ippool add pool1 192.168.25.200 192.168.25.210

# Create clonable bundle template named B
        create bundle template B
        set iface enable proxy-arp
        set iface route 10.10.10.0/24
        set iface idle 1800
        set iface enable tcpmssfix
        set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
        set ipcp ranges 192.168.25.1/32 ippool pool1
        set ipcp dns 192.168.25.2
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
        set bundle enable compression
        set ccp yes mppc
        set mppc yes e40
        set mppc yes e128
        set mppc yes stateless
# Create clonable link template named L
        create link template L pptp
# Set bundle template to use
        set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
        set link enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation
        set link mtu 1460
# Configure PPTP
        set pptp self EXERNAL_IP
# Allow to accept calls
        set link enable incoming