forum.lissyara.su

Код: Выделить всё

default:
        load pptp0
        load pptp1
        load pptp2

pptp0:
      new -i ng0 pptp0 pptp0
      set ipcp ranges 10.18.0.1/32 10.18.0.5/32
      load pptp_standart

pptp1:
     new -i ng1 pptp1 pptp1
     set ipcp ranges 10.18.0.1/32 10.18.0.6/32
     load pptp_standart

pptp2:
     new -i ng2 pptp2 pptp2
     set ipcp ranges 10.18.0.1/32 10.18.0.7/32
     load pptp_standart
#
#       client_standard:
#               set iface disable on-demand
#               set iface enable proxy-arp
#               set iface idle 1800
#               set iface enable tcpmssfix
#               set bundle enable multilink
#               set link yes acfcomp protocomp
#               set link no pap chap
#               set link enable chap
#               set link mtu 1460
#               set link keep-alive 10 60
#               set ipcp yes vjcomp
#               set ipcp dns 192.168.1.3
#               set ipcp nbns 192.168.1.4
#               set bundle enable compression
#               set ccp yes mppc
#               set ccp yes mpp-e40
#               set ccp yes mpp-e128
#               set ccp yes mpp-stateless

Код: Выделить всё

pptp0:
     set link type pptp


pptp1:
     set link type pptp


pptp2:
     set link type pptp

Код: Выделить всё

login    "passwd"


*****************************************************************************************

Код: Выделить всё

# mpd as pptp-vpn client: only outgoing calls, auto reconnect,
# ipcp-negotiated address, one-sided authentication,
# default route points on ISP's end
#

pptp-client:
        new pptp-cl pptp-cl
        set iface route default
        set bundle no noretry
        set auth authname MyLogin
        set auth password MyPass
        set link max-redial 0
        set link mtu 1460
        set link keep-alive 20 75
        set ipcp ranges 0.0.0.0/0 0.0.0.0/0
        open

Код: Выделить всё

add 550 allow tcp from any to any 1723 via setup keep-state
add 560 allow gre from any to any