Страница 1 из 1
Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:16:44
savio
Есть сервер на борту которого
Код: Выделить всё
uname -a
FreeBSD 6.2-RELEASE-p12 FreeBSD 6.2-RELEASE-p12 #6: Sun Feb 15 15:21:47 EET 2009 /usr/obj/usr/src/sys/kernel i386
возникла необходимость поставить туда две D-Link'овские сетевухи. Установил, фряха не видит их. установил на другой сервак. появились интерфейсы
ste0 и
ste1. На сервере где не видно сетевух ядро скомпилено с
Код: Выделить всё
...
device ste # Sundance ST201 (D-Link DFE-550TX)
...
пробовал подгрузить как модуль
Код: Выделить всё
#kldload if_ste
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
kldload: can't load if_ste: File exists
что может быть не так?
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:24:42
paradox
uname -a
pciconf -lvc
с двух серверов
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:30:16
paradox
имелось ввиду с установленой сетевкой по очереди на обеих
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:44:07
savio
проблемный сервер
Код: Выделить всё
#uname -a
FreeBSD 6.2-RELEASE-p12 FreeBSD 6.2-RELEASE-p12 #6: Sun Feb 15 15:21:47 EET 2009 root@oblrada.km.ua:/usr/obj/usr/src/sys/kernek i386
#
Код: Выделить всё
# pciconf -lv
agp0@pci0:0:0: class=0x060000 card=0x71908086 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
none1@pci0:14:0: class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
vendor = 'Sundance Technology Inc'
class = network
subclass = ethernet
vr0@pci0:16:0: class=0x020000 card=0x14051186 chip=0x31061106 rev=0x8b hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6105M/LOM Rhine III PCI Fast Ethernet Controller'
class = network
subclass = ethernet
none2@pci1:0:0: class=0x030000 card=0x00000000 chip=0x002d10de rev=0x15 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
class = display
subclass = VGA
#
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:46:51
paradox
Код: Выделить всё
none1@pci0:14:0: class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
vendor = 'Sundance Technology Inc' class = network subclass = ethernet
сетевка?
драйвера нет
или не видит
или или
сравнивай с рабочим сервером
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:47:39
savio
сервер на котором детектится
Код: Выделить всё
[root@hr1 /usr/home/savio]# uname -a
FreeBSD hr1.home 7.1-RELEASE FreeBSD 7.1-RELEASE #3: Thu Feb 5 16:58:40 EET 2009 root@hr1.home:/usr/obj/usr/src/sys/KERNEL i386
[root@hr1 /usr/home/savio]#
Код: Выделить всё
[root@hr1 /usr/home/savio]# pciconf -lvc
hostb0@pci0:0:0:0: class=0x060000 card=0x817a1043 chip=0x27708086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82945G/GZ/P/PL Host Bridge/DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 9) Intel cap 5 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x817a1043 chip=0x27728086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82945G Integrated Graphics Controller'
class = display
subclass = VGA
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
pcib1@pci0:0:28:0: class=0x060400 card=0x81791043 chip=0x27d08086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 1 root port
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x81791043
cap 01[a0] = powerspec 2 supports D0 D3 current D0
none0@pci0:0:29:0: class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none1@pci0:0:29:1: class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none2@pci0:0:29:2: class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none3@pci0:0:29:3: class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none4@pci0:0:29:7: class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib2@pci0:0:30:0: class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
cap 0d[50] = PCI Bridge card=0x81791043
isab0@pci0:0:31:0: class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: Quick Resume, SATA RAID-5, 6 PCI-e x1 slots, SATA RAI D-0/1/10, SATA AHCI
atapci0@pci0:0:31:1: class=0x01018f card=0x81791043 chip=0x27df8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
atapci1@pci0:0:31:2: class=0x01018f card=0x26011043 chip=0x27c08086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
cap 01[70] = powerspec 2 supports D0 D3 current D0
none5@pci0:0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
ste0@pci0:1:1:0: class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
vendor = 'Sundance Technology Inc'
device = 'FFK 8508 Encore ENL832-TX-ICNT Fast Ethernet PCI Adapter'
class = network
subclass = ethernet
cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
[root@hr1 /usr/home/savio]#
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 17:50:49
savio
ну так выяснил я что в фряхе сетевуха должн
а быть как ste
пробую подгрузить модуль, оно ругается
Код: Выделить всё
#kldload if_ste
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
kldload: can't load if_ste: File exists
пересборка мира до 6.4 или 7.1 поможет?
Re: Проблема с сетевой D-Link'а
Добавлено: 2009-02-05 18:09:34
paradox
сервер на котором детектится
[root@hr1 /usr/home/savio]# uname -a
FreeBSD hr1.home 7.1-RELEASE