forum.lissyara.su

Код: Выделить всё

Mar 22 13:59:57 kernel: Limiting icmp unreach response from 1329 to 200 packets/sec
Mar 22 14:00:01 snmpd[753]: truncating integer value > 32 bits
Mar 22 14:00:01 last message repeated 5 times
Mar 22 14:04:02 kernel: Limiting icmp unreach response from 434 to 200 packets/sec
Mar 22 14:11:40 syslogd: kernel boot file is /boot/kernel/kernel
Mar 22 14:11:40 kernel: Copyright (c) 1992-2008 The FreeBSD Project.
Mar 22 14:11:40 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar 22 14:11:40 kernel: The Regents of the University of California. All rights reserved.
Mar 22 14:11:40 ernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Mar 22 14:11:40 kernel: FreeBSD 7.0-RELEASE #10: Sat Feb 14 02:13:43 UTC 2009

Код: Выделить всё

Mar 22 13:59:57 kernel: Limiting icmp unreach response from 1329 to 200 packets/sec

Код: Выделить всё

$ dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #10: Sat Feb 14 02:13:43 UTC 2009
    bacz@bacz:/usr/src/sys/amd64/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2311.86-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x60fb2  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C                                                                                                                               MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
  Cores per package: 2
usable memory = 2139111424 (2040 MB)
avail memory  = 2064662528 (1969 MB)
ACPI APIC Table: <Nvidia ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0                                                                                                                               x177,0x376,0xe800-0xe80f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <serial bus, FireWire> at device 1.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xd800-0xd83f m                                                                                                                               em 0xfdfc0000-0xfdfdffff,0xfdfa0000-0xfdfbffff irq 16 at device 6.0 on pci1
em0: Ethernet address: xx:xx:xx:xx:xx:xx
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xd400-0xd43f m                                                                                                                               em 0xfdf80000-0xfdf9ffff,0xfdf60000-0xfdf7ffff irq 17 at device 7.0 on pci1
em1: Ethernet address: xx:xx:xx:xx:xx:xx
em1: [FILTER]
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding enabled, default to ac                                                                                                                               cept, logging limited to 1000 packets/entry by default
ad0: 152627MB <Seagate ST3160023A 8.01> at ata0-master UDMA100
acd0: CDRW <ASUS CRW-5232AS/1.0> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
IP Filter: v4.1.28 initialized.  Default = pass all, Logging = enabled
em0: link state changed to UP
em1: link state changed to UP
pid 744 (verlihub), uid 0: exited on signal 6 (core dumped)

Код: Выделить всё

machine         amd64
cpu             HAMMER
ident           GENERIC
maxusers        0

options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
options         MD_ROOT                 # MD is a potential root device
options         PROCFS                  # Process filesystem (requires PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_PART_GPT           # GUID Partition Tables.
options         GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_IA32             # Compatible with i386 binaries
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing

# Make an SMP-capable kernel by default
options         SMP                     # Symmetric MultiProcessor Kernel

# Others
options         IPFIREWALL
options         IPFIREWALL_FORWARD
options         IPFIREWALL_DEFAULT_TO_ACCEPT

options         IPFIREWALL_VERBOSE
options         IPFIREWALL_VERBOSE_LIMIT=1000

options         DUMMYNET
options         NETGRAPH
options         NETGRAPH_IPFW

options         LIBALIAS
options         NETGRAPH_NAT
options         NETGRAPH_NETFLOW

options         NETGRAPH_SPLIT
options         NETGRAPH_KSOCKET

options         NETGRAPH_ETHER
options         NETGRAPH_SOCKET
options         NETGRAPH_IFACE
options         NETGRAPH_PPP
options         NETGRAPH_TCPMSS
options         NETGRAPH_VJC
options         NETGRAPH_TEE
options         NETGRAPH_PPTPGRE
options         NETGRAPH_MPPC_ENCRYPTION
options         NETGRAPH_BPF
options         NETGRAPH_CAR
options         HZ=1000

options         MROUTING


# CPU frequency control
device          cpufreq

# Bus support.
device          acpi
device          pci

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device

# PCI Ethernet NICs.
device          em              # Intel PRO/1000 adapter Gigabit Ethernet Card

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          firmware        # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

Код: Выделить всё

dmesg -a

Код: Выделить всё

boot -v

Код: Выделить всё

acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed