APCUPSD
Добавлено: 2009-04-06 8:13:43
Господа помогите что то не могу соединить APC 1500 по COM порту. FreeBSD 7.0
Логи
Код: Выделить всё
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
Код: Выделить всё
## apcupsd.conf v1.1 ##
#
# for apcupsd release 3.14.5 (10 January 2009) - freebsd
#
# "apcupsd" POSIX config file
#
# ========= General configuration parameters ============
#
UPSCABLE smart
UPSTYPE apcsmart
DEVICE /dev/ttyd0
POLLTIME 60
LOCKFILE /var/spool/lock
SCRIPTDIR /usr/local/etc/apcupsd
PWRFAILDIR /var/run
NOLOGINDIR /var/run
ONBATTERYDELAY 6
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 10
NETSERVER on
NISIP 0.0.0.0
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS sharemaster
UPSMODE share
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
Код: Выделить всё
Mon Apr 06 12:23:55 KRAST 2009 apcupsd FATAL ERROR in smartsetup.c at line 171
PANIC! Cannot communicate with UPS via serial port.
Please make sure the port specified on the DEVICE directive is correct,
and that your cable specification on the UPSCABLE directive is correct.
Mon Apr 06 12:23:55 KRAST 2009 apcupsd error shutdown completed