загрузка без видяхи
Модератор: terminus
Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
-
Гость
- проходил мимо
загрузка без видяхи
Помогите! Не получается. Cтоит фря 8, с базовым ядром грузится на ура без видяхи, как только пересобираю ядро со своими параметрами она меня на йух посылает кароче не грузиться. Что нужно в ядро включить или убрать? чтобы всё ок было ?
Услуги хостинговой компании Host-Food.ru
Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
- manefesto
- Группенфюррер
- Сообщения: 6934
- Зарегистрирован: 2007-07-20 8:27:30
- Откуда: Пермь
- Контактная информация:
Re: загрузка без видяхи
из-за биоса может не грузиться.
он отвечает за загрузку.
а вообще логи смотри
он отвечает за загрузку.
а вообще логи смотри
- terminus
- майор
- Сообщения: 2305
- Зарегистрирован: 2007-10-29 11:27:35
- Откуда: Рига
Re: загрузка без видяхи
Надо включить все то, что есть в генерике и чего нет у вас, а выключить надо все чего нет в генерике, и что есть у вас.Гость писал(а):Что нужно в ядро включить или убрать? чтобы всё ок было ?
Более детального ответа не дать так как после вчерашнего голова бо-бо и телепатия нифурычит...
Модель: AST-PM-105/0044; Тип: Универсальный, ремонтный; Название: Терминус; Род повреждения: Распад функций; Выводы: Сдать на слом.
-
Гость
- проходил мимо
Re: загрузка без видяхи
биос не причём говорю же со стандартным ядром грузиться без видяхи!!! с конфигом generic я пробывал ради прикола пересобирал ничего в нём не менял И...!![мужской половой орган]!! тоже самое!!!
-
Гость
- проходил мимо
Re: загрузка без видяхи
вот с этим пересобирал посмотрите пажалуста что я мог не то сделать
Код: Выделить всё
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident AMD
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env "GENERIC.env"
#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
#options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
#options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
#options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_HOOKS # Kernel DTrace hooks
# To make an SMP kernel, the next two lines are needed
#options SMP # Symmetric MultiProcessor Kernel
#device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
#device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
#device amd # AMD 53C974 (Tekram DC-390(T))
#device hptiop # Highpoint RocketRaid 3xxx series
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
#device kbdmux # keyboard multiplexer
device vga # VGA video card driver
#device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
#device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
#device uart # Generic UART driver
# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 Gigabit Ethernet Family
#device igb # Intel PRO/1000 PCIE Server Gigabit Family
#device ixgb # Intel PRO/10GbE Ethernet Card
#device le # AMD Am7900 LANCE and Am79C9xx PCnet
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device ae # Attansic/Atheros L2 FastEthernet
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device alc # Atheros AR8131/AR8132 Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
#device lge # Level 1 LXT1001 gigabit Ethernet
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device nfe # nVidia nForce MCP on-board Ethernet
#device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
#device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# Wireless NIC cards
#device wlan # 802.11 support
#options IEEE80211_DEBUG # enable debug msgs
#options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
#options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device ath # Atheros pci/cardbus NIC's
#device ath_hal # pci/cardbus chip support
#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
#device ath_rate_sample # SampleRate tx rate control for ath
#device ral # Ralink Technology RT2500 wireless NICs.
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device rum # Ralink Technology RT2501USB wireless NICs
#device ural # Ralink Technology RT2500USB wireless NICs
#device uath # Atheros AR5523 wireless NICs
#device zyd # ZyDAS zb1211/zb1211b wireless NICs
#device urio # Diamond Rio 500 MP3 player
# USB Serial devices
#device u3g # USB-based 3G modems (Option, Huawei, Sierra)
#device uark # Technologies ARK3116 based serial adapters
#device ubsa # Belkin F5U103 and compatible serial adapters
#device uftdi # For FTDI usb serial adapters
#device uipaq # Some WinCE based devices
#device uplcom # Prolific PL-2303 serial adapters
#device uslcom # SI Labs CP2101/CP2102 serial adapters
#device uvisor # Visor and Palm devices
#device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
#device udav # Davicom DM9601E USB
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
#device fwip # IP over FireWire (RFC 2734,3146)
#device dcons # Dumb console driver
#device dcons_crom # Configuration ROM for dcons
#device sound
#device snd_via8233
device pf
device pflog
options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options DEVICE_POLLING
options HZ=1000
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_PPPOE
options NETGRAPH_SOCKET
options COMPAT_LINUX
options LINPROCFS
options LINSYSFS
###options VESA
###options SC_PIXEL_MODE
###options VGA_WIDTH90
###options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
-
_Gendos_^.@^_
- проходил мимо
Re: загрузка без видяхи
В студию
Вариант 2:
Цепляемся на сом порт и смотрим, что там тормозит загрузку.
Код: Выделить всё
uname -a
dmesg
Цепляемся на сом порт и смотрим, что там тормозит загрузку.
-
_Gendos_^.@^_
- проходил мимо
Re: загрузка без видяхи
Как реализовать вариант № 2:
http://www.freebsd.org/doc/ru_RU.KOI8-R ... setup.html
перед тем как задать вопрос не поленитесь пролистнуть оглавление хендбука 60% ответов там есть.
http://www.freebsd.org/doc/ru_RU.KOI8-R ... setup.html
перед тем как задать вопрос не поленитесь пролистнуть оглавление хендбука 60% ответов там есть.
-
Гость
- проходил мимо
Re: загрузка без видяхи
Код: Выделить всё
FreeBSD xren 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Fri Feb 12 02:27:17 UTC 2010 root@xren:/usr/obj/usr/src/sys/GENERIC i386
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Fri Feb 12 02:27:17 UTC 2010
root@xren:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (850.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
real memory = 335478784 (319 MB)
avail memory = 313606144 (299 MB)
kbd1 at kbdmux0
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 13ef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
pci0: <bridge> at device 7.4 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem 0xd5001000-0xd50010ff irq 10 at device 10.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:44:32:d2:ee
rl0: [ITHREAD]
rl1: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xd5000000-0xd50000ff irq 11 at device 11.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> PHY 0 on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:80:48:4f:bf:51
rl1: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
Timecounter "TSC" frequency 850035654 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ad0: 6187MB <FUJITSU MPE3064AT ED-03-04> at ata0-master UDMA66
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
Setting hostuuid: 4615d8e4-1f53-11d7-9310-0040ca6a5b37.
Setting hostid: 0x681dc5d5.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 13905 free (305 frags, 1700 blocks, 0.3% fragmentation)
/dev/ad0s1g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1g: clean, 711402 free (66 frags, 88917 blocks, 0.0% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 198258 free (26 frags, 24779 blocks, 0.0% fragmentation)
/dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 354526 free (10838 frags, 42961 blocks, 1.0% fragmentation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 285568 free (208 frags, 35670 blocks, 0.1% fragmentation)
Mounting local file systems:
.
Setting hostname: xren
.
Starting Network: lo0 rl0 rl1.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:02:44:32:d2:ee
inet 192.168.0.1 netmask 0xffffff00 broadcast 255.255.255.0
inet 85.28.197.62 netmask 0xff000000 broadcast 255.255.255.240
media: Ethernet autoselect (none)
status: no carrier
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 00:80:48:4f:bf:51
inet 172.25.48.3 netmask 0xffff0000 broadcast 255.255.255.0
media: Ethernet autoselect (none)
status: no carrier
Starting pflog.
Enabling pf
Feb 12 20:29:31 pflogd[338]: [priv]: msg PRIV_OPEN_LOG received
No ALTQ support in kernel
ALTQ related functions disabled
No ALTQ support in kernel
ALTQ related functions disabled
No ALTQ support in kernel
ALTQ related functions disabled
pf enabled
.
Starting PPP profile:
liza1
Loading /lib/libalias_cuseeme.so
Loading /lib/libalias_ftp.so
Loading /lib/libalias_irc.so
Loading /lib/libalias_nbt.so
Loading /lib/libalias_pptp.so
Loading /lib/libalias_skinny.so
Loading /lib/libalias_smedia.so
.
No ALTQ support in kernel
ALTQ related functions disabled
add net 91.199.14.0: gateway 85.28.197.49
add net 85.28.202.2: gateway 85.28.197.49
add net 92.43.155.240: gateway 85.28.197.49
add net 172.16.0.0: gateway 172.25.48.1
add net 172.24.0.0: gateway 172.25.48.1
add net 172.25.0.0: gateway 172.25.48.1
add net 172.25.32.0: gateway 172.25.48.1
add net 172.25.49.0: gateway 172.25.48.1
add net 172.25.50.0: gateway 172.25.48.1
add net 172.25.52.0: gateway 172.25.48.1
WARNING: attempt to domain_add(netgraph) after domainfinalize()
add net 172.25.56.0: gateway 172.25.48.1
add net 172.25.64.0: gateway 172.25.48.1
add net 172.25.128.0: gateway 172.25.48.1
add net 172.26.0.0: gateway 172.25.48.1
add net 172.28.0.0: gateway 172.25.48.1
Starting devd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/mysql
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
Clearing /tmp.
Updating motd:
.
Starting lighttpd.
Starting sshd.
Starting cron.
Local package initialization:
.
Fri Feb 12 20:29:39 UTC 2010
Feb 12 20:29:39 xren getty[921]: open /dev/ttyv0: No such file or directory
Feb 12 20:29:39 xren getty[922]: open /dev/ttyv1: No such file or directory
- manefesto
- Группенфюррер
- Сообщения: 6934
- Зарегистрирован: 2007-07-20 8:27:30
- Откуда: Пермь
- Контактная информация:
Re: загрузка без видяхи
поубирай пока дрова сетевух и wifi, потом методом научного тыка выясни что не так
-
Гость
- проходил мимо
Re: загрузка без видяхи
я уже [классический секс] на этом говне ядро пересобирать методом тыка... что я тока не пробывал и вга отключал с sc, не хочет не в какую чё ему надо не пойму
- manefesto
- Группенфюррер
- Сообщения: 6934
- Зарегистрирован: 2007-07-20 8:27:30
- Откуда: Пермь
- Контактная информация:
- Aligarh
- мл. сержант
- Сообщения: 101
- Зарегистрирован: 2009-10-17 23:33:35
- Контактная информация:
Re: загрузка без видяхи
Он написал, что не грузится даже если пересобрать чистый GENERIC.manefesto писал(а):оставь тогда генерик
Надо попробовать снести все логи (чтобы не мешали), и попытаться загрузится, а потом посмотреть в логи, там всё будет написано.
1. Работает - не трогай.
2. Плохо работает - убедись в возможности отмены изменений.
2. Плохо работает - убедись в возможности отмены изменений.
- manefesto
- Группенфюррер
- Сообщения: 6934
- Зарегистрирован: 2007-07-20 8:27:30
- Откуда: Пермь
- Контактная информация:
Re: загрузка без видяхи
разве ?Aligarh писал(а):Он написал, что не грузится даже если пересобрать чистый GENERIC.manefesto писал(а):оставь тогда генерик
Надо попробовать снести все логи (чтобы не мешали), и попытаться загрузится, а потом посмотреть в логи, там всё будет написано.
Помогите! Не получается. Cтоит фря 8, с базовым ядром грузится на ура без видяхи, как только пересобираю ядро со своими параметрами она меня на йух посылает кароче не грузиться. Что нужно в ядро включить или убрать? чтобы всё ок было ?
- Aligarh
- мл. сержант
- Сообщения: 101
- Зарегистрирован: 2009-10-17 23:33:35
- Контактная информация:
Re: загрузка без видяхи
4-е сообщение.Гость писал(а):биос не причём говорю же со стандартным ядром грузиться без видяхи!!! с конфигом generic я пробывал ради прикола пересобирал ничего в нём не менял И...!![мужской половой орган]!! тоже самое!!!
1. Работает - не трогай.
2. Плохо работает - убедись в возможности отмены изменений.
2. Плохо работает - убедись в возможности отмены изменений.
-
_Gendos_^..^_
- проходил мимо
Re: загрузка без видяхи
мдя...сбор железа....ну да ладно
(интересно как бы оно работало на более ранних версиях 6.х мысли в слух)
Не я не против, но всё же.........
Не вижу при загрузке sc0, vga0 ядро вроде generic должно присутствовать. Если с тем листингом, что вы дали - то это явно не generic
Не хардварная проблемма
Хм...........вы инсталили систему с нуля?
Сумбур какой то, дайте ваш GENERIC и dmesg boot
........."как корабль назовете так оно и попылвёт"............
(интересно как бы оно работало на более ранних версиях 6.х мысли в слух)
Не я не против, но всё же.........
Код: Выделить всё
real memory = [b]335478784 (319 MB)[/b]
avail memory = 313606144 (299 MB)
Не хардварная проблемма
Код: Выделить всё
Feb 12 20:29:31 pflogd[338]: [priv]: msg PRIV_OPEN_LOG received
No ALTQ support in kernel
ALTQ related functions disabled
No ALTQ support in kernel
ALTQ related functions disabled
No ALTQ support in kernel
ALTQ related functions disabled
Код: Выделить всё
Feb 12 20:29:39 xren getty[921]: open /dev/ttyv0: No such file or directory
Feb 12 20:29:39 xren getty[922]: open /dev/ttyv1: No such file or directory
........."как корабль назовете так оно и попылвёт"............
- Neus
- майор
- Сообщения: 2024
- Зарегистрирован: 2008-09-08 21:59:56
Re: загрузка без видяхи
как то давным давно... во времена редхата 6... я просто вынул видеокарту... и все работало без нее
я к тому что мож забить таки на свой конфиг а?
я к тому что мож забить таки на свой конфиг а?
- Aligarh
- мл. сержант
- Сообщения: 101
- Зарегистрирован: 2009-10-17 23:33:35
- Контактная информация:
Re: загрузка без видяхи
Кстати, годная мысль. Всё, что не в ядре можно подгружать через loader.conf или kldload.
На рядовом серверном компе кроме ipfw больше ничего и не надо такого, чего в ядре нет.
На рядовом серверном компе кроме ipfw больше ничего и не надо такого, чего в ядре нет.
1. Работает - не трогай.
2. Плохо работает - убедись в возможности отмены изменений.
2. Плохо работает - убедись в возможности отмены изменений.
-
Гость
- проходил мимо
Re: загрузка без видяхи
поцы я спиздел! - с generic ядром я пересобрал всё окей грузится вывод dmesg я дал дженерик ядра! ставил фрю с диска ....что неужели никто не знает какой параметр нужно убрать или прописать ?
-
Гость
- проходил мимо
Re: загрузка без видяхи
и полинг тоже ожно туда прописать ?Aligarh писал(а):Кстати, годная мысль. Всё, что не в ядре можно подгружать через loader.conf или kldload.
На рядовом серверном компе кроме ipfw больше ничего и не надо такого, чего в ядре нет.
-
Гость
- проходил мимо
Re: загрузка без видяхи
это имено дженерик! я подрубился по ссш и комп был загружен без видяхи вот я дмесг и сделал...я уже [классический секс] при каждом пересборе ставить видяху и подгружать снова старое ядро....Если с тем листингом, что вы дали - то это явно не generic
-
_Gendos_^..^_
- проходил мимо
Re: загрузка без видяхи
....можно и без мата..
запутали вы всех уже прилично......грузится не грузится...Я уточнить, вам нужна загрузка без видеокарты с пересобранным и настроеным Вами ядром.
Давайте так:
1. Вывод GENERIC, dmesg (подпишите для "одаренных" это Generic это dmesg к нему)
2. Ваша конфигурация ядра, dmesg
запутали вы всех уже прилично......грузится не грузится...Я уточнить, вам нужна загрузка без видеокарты с пересобранным и настроеным Вами ядром.
Давайте так:
1. Вывод GENERIC, dmesg (подпишите для "одаренных" это Generic это dmesg к нему)
2. Ваша конфигурация ядра, dmesg
-
_Gendos_^..^_
- проходил мимо
Re: загрузка без видяхи
Код: Выделить всё
# Bus support.
device acpi
device eisa
device pci
-
Гость
- проходил мимо
Re: загрузка без видяхи
пересобрал с этим:
ещё варианты будут ???
не помогает!!!!!!!!! не грузится!!!! блять уже все нервы себе [классический секс]# Bus support.
device acpi
device eisa
device pci
-
_Gendos_^..^_
- проходил мимо
Re: загрузка без видяхи
ещё один мат и помогать не буду....
Код: Выделить всё
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident GENERIC
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env "GENERIC.env"
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_HOOKS # Kernel DTrace hooks
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device ahd # AHA39320/29320 and onboard AIC79xx devices
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
device amd # AMD 53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mfi # LSI MegaRAID SAS
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgb # Intel PRO/10GbE Ethernet Card
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device ae # Attansic/Atheros L2 FastEthernet
device age # Attansic/Atheros L1 Gigabit Ethernet
device alc # Atheros AR8131/AR8132 Ethernet
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device rum # Ralink Technology RT2501USB wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
device urio # Diamond Rio 500 MP3 player
# USB Serial devices
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
device udav # Davicom DM9601E USB
# FireWire support
device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
device fwip # IP over FireWire (RFC 2734,3146)
device dcons # Dumb console driver
device dcons_crom # Configuration ROM for dcons
Код: Выделить всё
ls /dev

