forum.lissyara.su

Добавлено: **2007-06-18 23:10:41**

есть сервак. на нем есть mpd4-сервер
как с другой фри подключиться по впн?

конфиги вроде настроил.
как запустить соединение? что-та не пойму

туплю.
при старте обычным стартовым скриптом вылазит вот :

Код: Выделить всё

# /usr/local/etc/rc.d/mpd4.sh start
Starting mpd4.

# tail -f /var/log/mpd.log

Jun 16 04:12:36 virtual mpd: process 1633 started, version 4.1 (root@virtual 23:53 13-Apr-2007)
Jun 16 04:12:36 virtual mpd: Label 'startup' not found
Jun 16 04:12:36 virtual mpd: Label 'default' not found

опции startup и default - у мну присутствуют в конфиге сервера, но для клиента они ж не нада... я ж так понимаю? от куда тада они берутся, или вернее как правильно стартовать?

Добавлено: **2007-06-19 0:07:06**

так, фигня, с тем разобрался. просто довал те пункты в конфиг.
ща вот ругается на:

Код: Выделить всё

Jun 19 00:04:09 stl mpd: PPTP connection from 192.168.0.200 53759
Jun 19 00:04:09 stl mpd: pptp13: attached to connection with 192.168.0.200 53759
Jun 19 00:04:09 stl mpd: [pptp13] Accepting PPTP connection
Jun 19 00:04:09 stl mpd: [pptp13] opening link "pptp13"...
Jun 19 00:04:09 stl mpd: [pptp13] link: OPEN event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: Open event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: state change Initial --> Starting
Jun 19 00:04:09 stl mpd: [pptp13] LCP: LayerStart
Jun 19 00:04:09 stl mpd: [pptp13] attaching to peer's outgoing call
Jun 19 00:04:09 stl mpd: [pptp13] link: UP event
Jun 19 00:04:09 stl mpd: [pptp13] link: origination is remote
Jun 19 00:04:09 stl mpd: [pptp13] LCP: Up event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: state change Starting --> Req-Sent
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigReq #49
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM eb21c83e
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFTv2
Jun 19 00:04:09 stl mpd:  MP MRRU 1600
Jun 19 00:04:09 stl mpd:  MP SHORTSEQ
Jun 19 00:04:09 stl mpd:  ENDPOINTDISC [802.1] 00 02 55 30 b9 ba
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFTv2
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigNak #1
Jun 19 00:04:09 stl mpd:  AUTHPROTO EAP
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #2 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFT
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigNak #2
Jun 19 00:04:09 stl mpd:  AUTHPROTO EAP
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #3 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFT
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigNak #3
Jun 19 00:04:09 stl mpd:  AUTHPROTO EAP
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #4 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFT
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigNak #4
Jun 19 00:04:09 stl mpd:  AUTHPROTO EAP
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #5 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFT
Jun 19 00:04:09 stl mpd: [pptp13] LCP: SendConfigNak #5
Jun 19 00:04:09 stl mpd:  AUTHPROTO EAP
Jun 19 00:04:09 stl mpd: [pptp13] LCP: rec'd Configure Request #6 link 0 (Req-Sent)
Jun 19 00:04:09 stl mpd:  ACFCOMP
Jun 19 00:04:09 stl mpd:  PROTOCOMP
Jun 19 00:04:09 stl mpd:  MRU 1500
Jun 19 00:04:09 stl mpd:  MAGICNUM 3819941c
Jun 19 00:04:09 stl mpd:  AUTHPROTO CHAP MSOFT
Jun 19 00:04:09 stl mpd: [pptp13] LCP: not converging
Jun 19 00:04:09 stl mpd: [pptp13] LCP: parameter negotiation failed
Jun 19 00:04:09 stl mpd: [pptp13] LCP: state change Req-Sent --> Stopped
Jun 19 00:04:09 stl mpd: [pptp13] LCP: LayerFinish
Jun 19 00:04:09 stl mpd: pptp13-0: clearing call
Jun 19 00:04:09 stl mpd: pptp13-0: killing channel
Jun 19 00:04:09 stl mpd: [pptp13] PPTP call terminated
Jun 19 00:04:09 stl mpd: pptp13: closing connection with 192.168.0.200 53759
Jun 19 00:04:09 stl mpd: [pptp13] link: DOWN event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: Close event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: state change Stopped --> Closed
Jun 19 00:04:09 stl mpd: [pptp13] LCP: Down event
Jun 19 00:04:09 stl mpd: [pptp13] LCP: state change Closed --> Initial
Jun 19 00:04:09 stl mpd: pptp13: killing connection with 192.168.0.200 53759

конфиг сервера:

Код: Выделить всё

        set ipcp ranges 192.168.0.100/32 192.168.0.0/24
        set iface disable on-demand
        set bundle enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 60 180
        set ipcp yes vjcomp
        set ipcp dns 192.168.0.100
        set ccp yes mppc
        set ccp yes mpp-e40
        set ccp yes mpp-e56
        set ccp yes mpp-e128
        set bundle enable compression
        set ccp yes mpp-stateless
        set bundle yes crypt-reqd
        set pptp enable incoming
        set pptp disable originate
        set iface enable tcpmssfix
        set iface up-script /usr/local/etc/mpd4/up.sh
        set iface down-script /usr/local/etc/mpd4/down.sh
        set radius server 127.0.0.1 Gfyfcjybr&* 1812 1813
        set radius timeout 10
        set radius config /usr/local/etc/mpd4/radius.conf
        set radius retries 3
        set auth acct-update 300
        set auth enable radius-auth
        set auth enable radius-acct

конфиг клиента (на момент ошибки):

Код: Выделить всё

startup:
        set console port 777
        set console ip 127.0.0.1
        set console user admin *********
        set console open
        set web port 666
        set web ip 192.168.0.200
        set web user admin *********
        set web open

default:
        load vpn


vpn:
        new -i ng0 vpn vpn
        set iface disable on-demand
        set iface addrs 192.168.0.200 192.168.0.100
        set iface idle 0
        set bundle disable multilink
        set auth authname "login"
        set auth password "password"
        set link no pap
        set link yes chap
        set link mtu 1396
        set link keep-alive 60 180
        set ipcp no vjcomp
        set bundle disable compression
        set ccp no mppc
        set ccp no mpp-e40
        set ccp yes mpp-e128
        set ccp no mpp-stateless
        open

Добавлено: **2007-06-19 21:45:11**

Я конечно не специалист, но вот что мне показалось странным

В конфиге сервера

set ccp yes mppc

Эта строчка вроде включает компрессию

А в конфиге клиента

set bundle disable compression
set ccp no mppc

Эти строчки наоборот отключают компрессию

Может здесь собака порылась?

Добавлено: **2007-06-19 22:24:11**

<offtop>
где взять mpd ??если нет инета (порт не пашет)...

Добавлено: **2007-06-19 22:54:38**

vintovkin писал(а):<offtop>
где взять mpd ??если нет инета (порт не пашет)...

Скачать паккадж. Я так сам делал, когда настраивал свой роутер.

Добавлено: **2007-06-19 23:05:35**

Daywalker писал(а):
vintovkin писал(а):<offtop>
где взять mpd ??если нет инета (порт не пашет)...
Скачать паккадж. Я так сам делал, когда настраивал свой роутер.

как?распишите plz подробно ,как для чайника

(команды)

Добавлено: **2007-06-20 0:15:47**

vintovkin писал(а):как?распишите plz подробно ,как для чайника (команды)

Ищем ПК с интернетом, в браузере заходим в коллекцию портов
http://www.freebsd.org/ru/ports/index.html

Вводим mpd

Выдается список ПО, где присутствует mpd
Листаем
находим внизу

Код: Выделить всё

Category net
mpd-3.18_5 
Multi-link PPP daemon based on netgraph(4) [legacy version]
Long description : Sources : Package : Changes : Download
Maintained by: ports@FreeBSD.org


mpd-4.1 
Multi-link PPP daemon based on netgraph(4)
Long description : Sources : Package : Changes : Download
Maintained by: mav@alkar.net
Requires: expat-2.0.0_1, libpdel-0.5.3_2

Тычем на слово Package. Сохраняем *.tbz файл. Далее копируем его во FreeBSD машину.
Устанавливаем
pkg_add имя файла.
Настраиваем и работаем.

Добавлено: **2007-06-20 10:19:00**

перепробовал много чего, и поборол много чего, уже даже радиус стал выдавать ИП, затык теперь на ipcp
буду колупать дальше

Добавлено: **2007-06-20 23:09:18**

так. на мпд забил (думаю, что с ним не выйдет нифига), начал с pptpclint
достиг вот чего:

Jun 20 23:08:37 stl mpd: PPTP connection from 192.168.0.200 51768
Jun 20 23:08:37 stl mpd: pptp7: attached to connection with 192.168.0.200 51768
Jun 20 23:08:38 stl mpd: [pptp15] Accepting PPTP connection
Jun 20 23:08:38 stl mpd: [pptp15] opening link "pptp15"...
Jun 20 23:08:38 stl mpd: [pptp15] link: OPEN event
Jun 20 23:08:38 stl mpd: [pptp15] LCP: Open event
Jun 20 23:08:38 stl mpd: [pptp15] LCP: state change Initial --> Starting
Jun 20 23:08:38 stl mpd: [pptp15] LCP: LayerStart
Jun 20 23:08:38 stl mpd: [pptp15] attaching to peer's outgoing call
Jun 20 23:08:38 stl mpd: [pptp15] link: UP event
Jun 20 23:08:38 stl mpd: [pptp15] link: origination is remote
Jun 20 23:08:38 stl mpd: [pptp15] LCP: Up event
Jun 20 23:08:38 stl mpd: [pptp15] LCP: state change Starting --> Req-Sent
Jun 20 23:08:38 stl mpd: [pptp15] LCP: SendConfigReq #68
Jun 20 23:08:38 stl mpd: ACFCOMP
Jun 20 23:08:38 stl mpd: PROTOCOMP
Jun 20 23:08:38 stl mpd: MRU 1500
Jun 20 23:08:38 stl mpd: MAGICNUM 2615baaa
Jun 20 23:08:38 stl mpd: AUTHPROTO CHAP MSOFTv2
Jun 20 23:08:38 stl mpd: MP MRRU 1600
Jun 20 23:08:38 stl mpd: MP SHORTSEQ
Jun 20 23:08:38 stl mpd: ENDPOINTDISC [802.1] 00 02 55 30 b9 ba
Jun 20 23:08:40 stl mpd: [pptp15] LCP: SendConfigReq #69
Jun 20 23:08:40 stl mpd: ACFCOMP
Jun 20 23:08:40 stl mpd: PROTOCOMP
Jun 20 23:08:40 stl mpd: MRU 1500
Jun 20 23:08:40 stl mpd: MAGICNUM 2615baaa
Jun 20 23:08:40 stl mpd: AUTHPROTO CHAP MSOFTv2
Jun 20 23:08:40 stl mpd: MP MRRU 1600
Jun 20 23:08:40 stl mpd: MP SHORTSEQ
Jun 20 23:08:40 stl mpd: ENDPOINTDISC [802.1] 00 02 55 30 b9 ba
Jun 20 23:08:40 stl mpd: [pptp15] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: ACFCOMP
Jun 20 23:08:40 stl mpd: ACCMAP 0x00000000
Jun 20 23:08:40 stl mpd: MRU 1500
Jun 20 23:08:40 stl mpd: MAGICNUM 42d6e62d
Jun 20 23:08:40 stl mpd: [pptp15] LCP: SendConfigAck #1
Jun 20 23:08:40 stl mpd: ACFCOMP
Jun 20 23:08:40 stl mpd: ACCMAP 0x00000000
Jun 20 23:08:40 stl mpd: MRU 1500
Jun 20 23:08:40 stl mpd: MAGICNUM 42d6e62d
Jun 20 23:08:40 stl mpd: [pptp15] LCP: state change Req-Sent --> Ack-Sent
Jun 20 23:08:40 stl mpd: [pptp15] LCP: rec'd Configure Reject #68 link 0 (Ack-Sent)
Jun 20 23:08:40 stl mpd: Wrong id#, expecting 69
Jun 20 23:08:40 stl mpd: [pptp15] LCP: rec'd Configure Reject #69 link 0 (Ack-Sent)
Jun 20 23:08:40 stl mpd: PROTOCOMP
Jun 20 23:08:40 stl mpd: MP MRRU 1600
Jun 20 23:08:40 stl mpd: MP SHORTSEQ
Jun 20 23:08:40 stl mpd: [pptp15] LCP: SendConfigReq #70
Jun 20 23:08:40 stl mpd: ACFCOMP
Jun 20 23:08:40 stl mpd: MRU 1500
Jun 20 23:08:40 stl mpd: MAGICNUM 2615baaa
Jun 20 23:08:40 stl mpd: AUTHPROTO CHAP MSOFTv2
Jun 20 23:08:40 stl mpd: [pptp15] LCP: rec'd Configure Ack #70 link 0 (Ack-Sent)
Jun 20 23:08:40 stl mpd: ACFCOMP
Jun 20 23:08:40 stl mpd: MRU 1500
Jun 20 23:08:40 stl mpd: MAGICNUM 2615baaa
Jun 20 23:08:40 stl mpd: AUTHPROTO CHAP MSOFTv2
Jun 20 23:08:40 stl mpd: [pptp15] LCP: state change Ack-Sent --> Opened
Jun 20 23:08:40 stl mpd: [pptp15] LCP: auth: peer wants nothing, I want CHAP
Jun 20 23:08:40 stl mpd: [pptp15] CHAP: sending CHALLENGE len:17
Jun 20 23:08:40 stl mpd: [pptp15] LCP: LayerUp
Jun 20 23:08:40 stl mpd: [pptp15] CHAP: rec'd RESPONSE #1
Jun 20 23:08:40 stl mpd: Name: "ispanec"
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: Auth-Thread started
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: Trying RADIUS
Jun 20 23:08:40 stl mpd: [pptp15] RADIUS: RadiusAuthenticate for: ispanec
Jun 20 23:08:40 stl mpd: [pptp15] RADIUS: rec'd RAD_ACCESS_ACCEPT for user ispanec
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: RADIUS returned authenticated
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: Auth-Thread finished normally
Jun 20 23:08:40 stl mpd: [pptp15] CHAP: ChapInputFinish: status authenticated
Jun 20 23:08:40 stl mpd: [pptp15] CHAP: sending SUCCESS len:42
Jun 20 23:08:40 stl mpd: [pptp15] LCP: authorization successful
Jun 20 23:08:40 stl mpd: [pptp15] Bundle up: 1 link, total bandwidth 64000 bps
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: Open event
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: state change Initial --> Starting
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: LayerStart
Jun 20 23:08:40 stl mpd: [pptp15] CCP: Open event
Jun 20 23:08:40 stl mpd: [pptp15] CCP: state change Initial --> Starting
Jun 20 23:08:40 stl mpd: [pptp15] CCP: LayerStart
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: Up event
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: state change Starting --> Req-Sent
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: SendConfigReq #37
Jun 20 23:08:40 stl mpd: IPADDR 192.168.0.100
Jun 20 23:08:40 stl mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jun 20 23:08:40 stl mpd: [pptp15] CCP: Up event
Jun 20 23:08:40 stl mpd: [pptp15] CCP: state change Starting --> Req-Sent
Jun 20 23:08:40 stl mpd: [pptp15] CCP: SendConfigReq #37
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x010000e0:MPPE(40, 56, 128 bits), stateless
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: Accounting-Thread started
Jun 20 23:08:40 stl mpd: [pptp15] RADIUS: RadiusAccount for: ispanec (Type: 1)
Jun 20 23:08:40 stl mpd: [pptp15] CCP: rec'd Configure Request #1 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x000000e0:MPPE(40, 56, 128 bits),
Jun 20 23:08:40 stl mpd: [pptp15] CCP: SendConfigNak #1
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x00000040:MPPE(128 bits),
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: rec'd Configure Request #1 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: IPADDR 0.0.0.0
Jun 20 23:08:40 stl mpd: NAKing with 10.0.0.35
Jun 20 23:08:40 stl mpd: COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: SendConfigNak #1
Jun 20 23:08:40 stl mpd: IPADDR 10.0.0.35
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: rec'd Configure Ack #37 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: IPADDR 192.168.0.100
Jun 20 23:08:40 stl mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: state change Req-Sent --> Ack-Rcvd
Jun 20 23:08:40 stl mpd: [pptp15] CCP: rec'd Configure Nak #37 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x01000040:MPPE(128 bits), stateless
Jun 20 23:08:40 stl mpd: [pptp15] CCP: SendConfigReq #38
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x01000040:MPPE(128 bits), stateless
Jun 20 23:08:40 stl mpd: [pptp15] CCP: rec'd Configure Request #2 link 0 (Req-Sent)
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x00000040:MPPE(128 bits),
Jun 20 23:08:40 stl mpd: [pptp15] CCP: SendConfigAck #2
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x00000040:MPPE(128 bits),
Jun 20 23:08:40 stl mpd: [pptp15] CCP: state change Req-Sent --> Ack-Sent
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: rec'd Configure Request #2 link 0 (Ack-Rcvd)
Jun 20 23:08:40 stl mpd: IPADDR 10.0.0.35
Jun 20 23:08:40 stl mpd: 10.0.0.35 is OK
Jun 20 23:08:40 stl mpd: COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: SendConfigAck #2
Jun 20 23:08:40 stl mpd: IPADDR 10.0.0.35
Jun 20 23:08:40 stl mpd: COMPPROTO VJCOMP, 16 comp. channels, allow comp-cid
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: state change Ack-Rcvd --> Opened
Jun 20 23:08:40 stl mpd: [pptp15] IPCP: LayerUp
Jun 20 23:08:40 stl mpd: 192.168.0.100 -> 10.0.0.35
Jun 20 23:08:40 stl mpd: [pptp15] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user ispanec
Jun 20 23:08:40 stl mpd: [pptp15] IFACE: Up event
Jun 20 23:08:40 stl mpd: [pptp15] CCP: rec'd Configure Ack #38 link 0 (Ack-Sent)
Jun 20 23:08:40 stl mpd: MPPC
Jun 20 23:08:40 stl mpd: 0x01000040:MPPE(128 bits), stateless
Jun 20 23:08:40 stl mpd: [pptp15] CCP: state change Ack-Sent --> Opened
Jun 20 23:08:40 stl mpd: [pptp15] CCP: LayerUp
Jun 20 23:08:40 stl mpd: Compress using: mppc (MPPE(128 bits), stateless)
Jun 20 23:08:40 stl mpd: Decompress using: mppc (MPPE(128 bits), )
Jun 20 23:08:40 stl mpd: [pptp15] AUTH: Accounting-Thread finished normally
Jun 20 23:08:41 stl mpd: pptp7-0: call cleared by peer
Jun 20 23:08:41 stl mpd: pptp7-0: killing channel
Jun 20 23:08:41 stl mpd: [pptp15] PPTP call terminated
Jun 20 23:08:41 stl mpd: pptp7: closing connection with 192.168.0.200 51768
Jun 20 23:08:41 stl mpd: pptp7: read: Connection reset by peer
Jun 20 23:08:41 stl mpd: pptp7: killing connection with 192.168.0.200 51768
Jun 20 23:08:41 stl mpd: [pptp15] link: DOWN event
Jun 20 23:08:41 stl mpd: [pptp15] LCP: Close event
Jun 20 23:08:41 stl mpd: [pptp15] LCP: state change Opened --> Closing
Jun 20 23:08:41 stl mpd: [pptp15] AUTH: Accounting data for user ispanec: 3 seconds, 248 octets in, 302 octets out
Jun 20 23:08:41 stl mpd: [pptp15] AUTH: Cleanup
Jun 20 23:08:41 stl mpd: [pptp15] Bundle up: 0 links, total bandwidth 9600 bps
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: Close event
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: state change Opened --> Closing
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: SendTerminateReq #38
Jun 20 23:08:41 stl mpd: [pptp15] error writing len 8 frame to bypass: Network is down
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: LayerDown
Jun 20 23:08:41 stl mpd: [pptp15] AUTH: Accounting-Thread started
Jun 20 23:08:41 stl mpd: [pptp15] RADIUS: RadiusAccount for: ispanec (Type: 2)
Jun 20 23:08:41 stl mpd: [pptp15] RADIUS: Termination cause: Dropped, RADIUS: 2
Jun 20 23:08:41 stl mpd: [pptp15] RADIUS: rec'd RAD_ACCOUNTING_RESPONSE for user ispanec
Jun 20 23:08:41 stl mpd: [pptp15] IFACE: Down event
Jun 20 23:08:41 stl mpd: [pptp15] CCP: Close event
Jun 20 23:08:41 stl mpd: [pptp15] CCP: state change Opened --> Closing
Jun 20 23:08:41 stl mpd: [pptp15] CCP: SendTerminateReq #39
Jun 20 23:08:41 stl mpd: [pptp15] error writing len 8 frame to bypass: Network is down
Jun 20 23:08:41 stl mpd: [pptp15] CCP: LayerDown
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: Down event
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: LayerFinish
Jun 20 23:08:41 stl mpd: [pptp15] No NCPs left. Closing links...
Jun 20 23:08:41 stl mpd: [pptp15] closing link "pptp15"...
Jun 20 23:08:41 stl mpd: [pptp15] IPCP: state change Closing --> Initial
Jun 20 23:08:41 stl mpd: [pptp15] CCP: Down event
Jun 20 23:08:41 stl mpd: [pptp15] CCP: LayerFinish
Jun 20 23:08:41 stl mpd: [pptp15] CCP: state change Closing --> Initial
Jun 20 23:08:41 stl mpd: [pptp15] LCP: SendTerminateReq #71
Jun 20 23:08:41 stl mpd: [pptp15] error writing len 8 frame to bypass: Network is down
Jun 20 23:08:41 stl mpd: [pptp15] LCP: LayerDown
Jun 20 23:08:41 stl mpd: [pptp15] LCP: Down event
Jun 20 23:08:41 stl mpd: [pptp15] LCP: LayerFinish
Jun 20 23:08:41 stl mpd: [pptp15] LCP: state change Closing --> Initial
Jun 20 23:08:41 stl mpd: [pptp15] link: CLOSE event
Jun 20 23:08:41 stl mpd: [pptp15] LCP: Close event
Jun 20 23:08:41 stl mpd: [pptp15] AUTH: Accounting-Thread finished normally

не пойму что ему нуно

Добавлено: **2007-06-21 0:09:04**

Логи читать не умею

, но предложу простое

Разрешен ли в файерволе протокол GRE и доступ по порту 1723 (не помню в какую сторону)?

Добавлено: **2007-06-21 9:28:45**

попробуй вот с таким конфигом

Код: Выделить всё

[abigor@falos ~]$ s
[root@falos ~]# cd /usr/local/etc/mpd4/
[root@falos mpd4]# cat mpd.conf
default:
    load pptp00

pptp00:
    new -i ng0 pptp00 pptp00
    load pptpd

pptpd:
    set iface addrs 0 0
    set iface route default
    set iface enable on-demand
    set iface idle 0
    set iface enable tcpmssfix

    set bundle enable multilink
    set bundle enable compression
    set bundle yes crypt-reqd

    set ccp yes mppc
#    set ccp yes mpp-compress
    set ccp yes mpp-e40
    set ccp yes mpp-e56
    set ccp yes mpp-e128
    set ccp yes mpp-stateless

    set auth authname "user"
    set auth password "pass"
    set link no acfcomp protocomp
    set link disable pap chap
    set link accept  chap
    set link keep-alive 600 60
    set ipcp yes vjcomp
    set ipcp ranges 0.0.0.0/0 0.0.0.0/0
    open
[root@falos mpd4]# cat mpd.links
pptp00:
    set link type pptp
    set pptp self client_ip
    set pptp peer server_ip
    set pptp disable incoming
    set pptp enable originate
    set pptp disable delayed-ack
    set pptp disable windowing
[root@falos mpd4]#

с аким конфигом как раз цепляюсь к серверу настроенному по моей статье.
gre открыто в обе стороны.

Добавлено: **2007-06-21 10:02:14**

а какая ОС на сервере-клиенте?

Добавлено: **2007-06-21 10:05:39**

Код: Выделить всё

[abigor@falos ~]$ uname -a
FreeBSD falos.isea.ru 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007     root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
[abigor@falos ~]$ mpd4 -v
Version 4.1 (root@falos.isea.ru 10:25  6-Jun-2007)
[abigor@falos ~]$ kldstat
Id Refs Address    Size     Name
 1   17 0xc0400000 6f6544   kernel
 2    1 0xc0af7000 b930     ntfs.ko
 3    1 0xc0b03000 59f20    acpi.ko
 4    1 0xc3667000 4000     ng_socket.ko
 5    9 0xc366b000 a000     netgraph.ko
 6    1 0xc367b000 3000     ng_iface.ko
 7    1 0xc3680000 6000     ng_ppp.ko
 8    1 0xc36e0000 4000     ng_vjc.ko
 9    1 0xc36f0000 4000     ng_bpf.ko
10    1 0xc36f5000 2000     ng_tcpmss.ko
11    1 0xc3762000 3000     daemon_saver.ko
12    1 0xc384a000 4000     ng_pptpgre.ko
13    1 0xc384e000 4000     ng_ksocket.ko
14    1 0xc3853000 3000     ng_mppc.ko
15    1 0xc3856000 2000     rc4.ko
[abigor@falos ~]$

Добавлено: **2007-06-21 10:14:41**

отож

а у мну 5.3, уверне на 99% что не получится.
ща взялся за пптпклиент
верхний лог именно с ним

при чем прикол был
1. при старте пптклиента, он почему-то клиенту ставил ИП сервера. пересборка помогла
2. соединение устанавливается, на 3 секунды, потом падает.
3. увидел в логах херь какую-то....ща показать не могу, но там что-то страшное. думаю, мож потому-что виртуалка, и не все стоит...

Добавлено: **2007-06-21 10:43:09**

ну, с

Код: Выделить всё

FreeBSD 4.11-STABLE

и с

Код: Выделить всё

mpd -v
Version 3.18 (root@jail-67038 03:27  3-Feb-2007)

до меня так же нормально подключение проходит. Вот предположительный конфиг

Код: Выделить всё

> cat mpd.conf
default:
    load pptp00

pptp00:
    new -i ng0 pptp00 pptp00
    load pptpd

pptpd:
    set iface addrs 1.1.1.1 2.2.2.2
    set iface route 0.0.0.0
    set iface disable on-demand
    set iface idle 0
    set iface enable tcpmssfix
    set bundle disable multilink
    set auth authname "user"
    set auth password "pass"
    set link no acfcomp protocomp
    set link disable pap chap
    set link accept chap
#    set link mtu 1460
    set link keep-alive 600 60
    set ipcp no vjcomp
    set ipcp ranges 0.0.0.0/0 0.0.0.0/0
    set ccp yes mppc
    set ccp yes mpp-e40
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    open
> cat mpd.links
pptp00:
    set link type pptp
    set pptp self client_ip
    set pptp peer server_ip
    set pptp enable originate incoming outcall
    set pptp disable windowing

Добавлено: **2007-06-21 10:54:20**

ог, вечерком тада попробую

forum.lissyara.su

mpd как клиент

mpd как клиент