Тем не менее, данные именно с аплоада и загрузки. Может быть это, из-за того, что рейд-массив сделан? Не видно данных...
Код: Выделить всё
dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-BETA2 #0: Fri Oct 20 03:22:00 MSD 2006
cerber@:/usr/src/sys/i386/compile/TERRA25
ACPI APIC Table: <P4M800 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.50GHz (2499.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
real memory = 518979584 (494 MB)
avail memory = 503099392 (479 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <P4M800 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 3296 (P4M800) host to PCI bridge> mem 0xf8000000-0xf9ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <ITE IT8212F UDMA133 controller> port 0xe600-0xe607,0xec00-0xec03,0xd800-0xd807,0xd900-0xd903,0xda00-0xda0f irq 16 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <SiI 3114 SATA150 controller> port 0xdb00-0xdb07,0xdc00-0xdc03,0xdd00-0xdd07,0xde00-0xde03,0xdf00-0xdf0f mem 0xfc0c2000-0xfc0c23ff irq 17 at device 9.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ata6: <ATA channel 2> on atapci1
ata7: <ATA channel 3> on atapci1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0xe000-0xe03f mem 0xfc0a0000-0xfc0bffff,0xfc080000-0xfc09ffff irq 18 at device 10.0 on pci0
em0: Ethernet address: 00:07:e9:2a:99:16
em0: [FAST]
atapci2: <VIA 6420 SATA150 controller> port 0xe100-0xe107,0xe200-0xe203,0xe300-0xe307,0xe400-0xe403,0xe500-0xe50f,0xd000-0xd0ff irq 20 at device 15.0 on pci0
ata8: <ATA channel 0> on atapci2
ata9: <ATA channel 1> on atapci2
atapci3: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe700-0xe70f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci3
ata1: <ATA channel 1> on atapci3
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfc0c1000-0xfc0c10ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:14:2a:94:9e:ca
acpi_tz0: <Thermal Zone> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd2000-0xd67ff,0xd7000-0xd87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2499933012 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
ad0: 38166MB <Seagate ST340014A 8.01> at ata0-master UDMA100
ad4: 238475MB <Seagate ST3250824A 3.AAE> at ata2-master UDMA100
ad6: 238475MB <SAMSUNG SP2514N VF100-33> at ata3-master UDMA100
ad7: 238475MB <SAMSUNG SP2514N VF100-33> at ata3-slave UDMA100
ad8: 381554MB <SAMSUNG HD400LJ ZZ100-14> at ata4-master SATA150
ad10: 381554MB <SAMSUNG HD401LJ ZZ100-15> at ata5-master SATA150
ad12: 381554MB <SAMSUNG HD401LJ ZZ100-15> at ata6-master SATA150
ad14: 381554MB <SAMSUNG HD401LJ ZZ100-15> at ata7-master SATA150
ar0: 1526216MB <FreeBSD PseudoRAID RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad8 at ata4-master
ar0: disk1 READY using ad10 at ata5-master
ar0: disk2 READY using ad12 at ata6-master
ar0: disk3 READY using ad14 at ata7-master
Trying to mount root from ufs:/dev/ad0s1a