У русских простые принципы в жизни: голодного - накормить, замерзшего - согреть, утопающего - спасти, охуевшего - отпиздить
https://forum.lissyara.su/
))Код: Выделить всё
Nov 27 14:17:00 gw pptpd[1469]: MGR: Launching /usr/local/sbin/pptpctrl to handle client
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Client 192.168.0.5 control connection started
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 1)
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Made a START CTRL CONN RPLY packet
Nov 27 14:17:00 gw pptpd[1469]: CTRL: I wrote 156 bytes to the client.
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Sent packet to client
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 7)
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Set parameters to 100000000 maxbps, 64 window size
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Made a OUT CALL RPLY packet
Nov 27 14:17:00 gw pptpd[1469]: CTRL: Starting call (launching pppd, opening GRE)
Nov 27 14:17:00 gw pptpd[1469]: CTRL: pty_fd = 7
Nov 27 14:17:00 gw pptpd[1469]: CTRL: tty_fd = 6
Nov 27 14:17:00 gw pptpd[1470]: CTRL (PPPD Launcher): program binary = /usr/sbin/ppp
Nov 27 14:17:02 gw pptpd[1469]: CTRL: I wrote 32 bytes to the client.
Nov 27 14:17:02 gw pptpd[1469]: CTRL: Sent packet to client
Nov 27 14:17:02 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 15)
Nov 27 14:17:02 gw pptpd[1469]: CTRL: Got a SET LINK INFO packet with standard ACCMs
Nov 27 14:17:02 gw pptpd[1469]: GRE: accepting packet #0
Nov 27 14:17:02 gw pptpd[1469]: GRE: accepting packet #1
Nov 27 14:17:05 gw pptpd[1469]: GRE: accepting packet #2
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 15)
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Ignored a SET LINK INFO packet with real ACCMs!
Nov 27 14:17:05 gw pptpd[1469]: GRE: accepting packet #3
Nov 27 14:17:05 gw pptpd[1469]: GRE: accepting packet #4
Nov 27 14:17:05 gw pptpd[1469]: GRE: accepting packet #5
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 15)
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Got a SET LINK INFO packet with standard ACCMs
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Received PPTP Control Message (type: 12)
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Made a CALL DISCONNECT RPLY packet
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Received CALL CLR request (closing call)
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Reaping child PPP[1470]
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Client 192.168.0.5 control connection finished
Nov 27 14:17:05 gw pptpd[1469]: CTRL: Exiting now
Nov 27 14:17:05 gw pptpd[1468]: MGR: Reaped child 1469
Код: Выделить всё
cat /etc/ppp/options.pptpd
proxyarp
+MSChap-V2 mppe-128 mppe-statelessgw#
Код: Выделить всё
cat /etc/ppp/ppp.conf
pptp:
enable proxy
set dns 213.170.64.33
set ifaddr 192.168.0.9
set timeout 300
enable MSChapV2Код: Выделить всё
cat /etc/ppp/ppp.secret
f0x 123 192.168.0.8
Код: Выделить всё
cat pptpd.conf
options /etc/ppp/options.pptpd
debug
noipparamКод: Выделить всё
ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.0.9 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:c0:26:30:18:68
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 213.170.81.73 netmask 0xffffffe0 broadcast 213.170.81.95
ether 00:50:fc:c5:19:f8
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
741
This error may be resolved by either selecting or clearing the Require data encryption (disconnect if none) check box located on the Security tab. Check with your system administrator regarding client-side security settings.
This error may also occur if your password is longer than 14 characters, you selected the Require data encryption (disconnect if none) check box on the Security tab, and you selected the Require secured password check box in Validate my identity as follows. Use a password less than 14 characters, clear the Require data encryption (disconnect if none) check box, and clear the Allow unsecured password check box in Validate my identity as follows.
See To configure a connection. Also see VPN connection authentication and encryption.