forum.lissyara.su

Код: Выделить всё

#################################################################
#
#	MPD configuration file
#
# This file defines the configuration for mpd: what the
# bundles are, what the links are in those bundles, how
# the interface should be configured, various PPP parameters,
# etc. It contains commands just as you would type them
# in at the console. A blank line ends an entry. Lines
# starting with a "#" are comments and get completely
# ignored.
#
# $Id: mpd.conf.sample,v 1.15.2.1 2004/03/07 14:33:27 mbretter Exp $
#
#################################################################

#
# Default configuration is "myisp"

default:
   load pptp0
   load pptp1
   load pptp2
   load pptp3
   load pptp4
   load pptp5
pptp0:
	new -i ng0 pptp0 pptp0
        set ipcp ranges 192.168.1.118/24 192.168.1.4/24	
        load pptp_standart
pptp1:
	new -i ng1 pptp1 pptp1
        set ipcp ranges 192.168.1.118/24 192.168.1.5/24	
        load pptp_standart
pptp2:
        new -i ng2 pptp2 pptp2
        set ipcp ranges 192.168.1.118/24 192.168.1.6/24	
        load pptp_standart
pptp3:
	new -i ng3 pptp3 pptp3
        set ipcp ranges 192.168.1.118/24 192.168.1.7/24	
        load pptp_standart

pptp4:
	new -i ng4 pptp4 pptp4
        set ipcp ranges 192.168.1.118/24 192.168.1.8/24	
        load pptp_standart


pptp5:
	new -i ng5 pptp5 pptp5
        set ipcp ranges 192.168.1.118/24 192.168.1.10/24	
        load pptp_standart
	

	pptp_standard:
		set iface disable on-demand
		set iface enable proxy-arp
		set iface idle 1800
		set iface enable tcpmssfix
		set bundle enable multilink
		set link yes acfcomp protocomp
		set link no pap chap
		set link enable chap
		set link mtu 1460
		set link keep-alive 10 60
		set ipcp yes vjcomp
		set ipcp dns 192.168.0.150
#		set ipcp nbns 192.168.1.4
#		set bundle enable compression
#		set ccp yes mppc
#		set ccp yes mpp-e40
#		set ccp yes mpp-e128
#		set ccp yes mpp-stateless
#               set pptp self 192.168.0.118  
а вот mpd.link
#################################################################
#
#	MPD links file
#
# In this file you define the various "links" that comprise
# a bundle. Each link corresponds to a single serial device.
# These are commands that could be typed into the console directly.
#
# This file should only contain configuration for a link if
# that configuration is specific to that particular link. That
# is, things like device name and bandwidth. Other generic link
# options like LCP parameters belong in "mpd.conf".
#
# The first command for each link should be "set link type ..."
#
# $Id: mpd.links.sample,v 1.4.2.1 2004/03/07 14:33:27 mbretter Exp $
#
#################################################################

#
# An example of a normal analog modem on COM2. Mpd knows how
# to automatically detect and configure several common modem types.
#
# For our PPTP server
#

pptp0:
        set link type pptp
        set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate
pptp1:
        set link type pptp
        set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate
pptp2:
        set link type pptp
	set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate
pptp3:
        set link type pptp
        set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate
pptp4:
        set link type pptp
        set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate

pptp5:
        set link type pptp
        set pptp self 192.168.0.118
	set pptp enable incoming
        set pptp disable originate