Код: Выделить всё
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Wed Sep 22 11:59:23 MSD 2010
mlavkin@snob-sql-master.farm:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5430 @ 2.66GHz (2662.67-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 17179869184 (16384 MB)
avail memory = 16553889792 (15787 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xdc000000-0xddffffff irq 17 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: 1000baseSX-FDX, auto
bce0: Ethernet address: 00:22:19:86:f7:24
bce0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xda000000-0xdbffffff irq 18 at device 0.0 on pci6
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1: 1000baseSX-FDX, auto
bce1: Ethernet address: 00:22:19:86:f7:26
bce1: [ITHREAD]
pcib7: <PCI-PCI bridge> at device 0.3 on pci1
pci7: <PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci8: <ACPI PCI bus> on pcib8
mfi0: <Dell PERC 6> port 0xec00-0xecff mem 0xde180000-0xde1bffff,0xde1c0000-0xde1fffff irq 16 at device 0.0 on pci8
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 3594 (338543289s/0x0020/info) - Shutdown command received from host
mfi0: 3595 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f11/1028)
mfi0: 3596 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528
mfi0: 3597 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0)
mfi0: 3598 (boot + 3s/0x0020/info) - Package version 6.1.1-0047
mfi0: 3599 (boot + 3s/0x0020/info) - Board Revision
mfi0: 3600 (boot + 21s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored
mfi0: 3601 (boot + 21s/0x0002/info) - Inserted: Encl PD 20
mfi0: 3602 (boot + 21s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=5002209084350000,0000000000000000
mfi0: 3603 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 3604 (boot + 21s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000c5000f612b4d,0000000000000000
mfi0: 3605 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 3606 (boot + 21s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000c5000f611c05,0000000000000000
mfi0: [ITHREAD]
pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci9: <ACPI PCI bus> on pcib9
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xd800-0xd8ff mem 0xde2f8000-0xde2fbfff irq 18 at device 0.0 on pci9
isp0: [ITHREAD]
isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xdc00-0xdcff mem 0xde2fc000-0xde2fffff irq 19 at device 0.1 on pci9
isp1: [ITHREAD]
pcib10: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci12: <ACPI PCI bus> on pcib12
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xbc80-0xbc9f irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xbca0-0xbcbf irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xbcc0-0xbcdf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xde0ff800-0xde0ffbff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem 0xd0000000-0xd7ffffff,0xde3f0000-0xde3fffff irq 19 at device 4.0 on pci13
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xd0000-0xd0fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7 Timecounters tick every 1.000 msec
mfi0: 3607 (338543802s/0x0020/info) - Time established as 09/23/10 7:56:42; (63 seconds since power on)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
mfid0: <MFI Logical Disk> on mfi0
mfid0: 69376MB (142082048 sectors) RAID volume '' is optimal
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <American Megatrends Inc.> at usbus3
umass0: <Virtual Cdrom> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0000
(probe0:isp0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:isp0:0:0:0): CAM status: SCSI Status Error
(probe0:isp0:0:0:0): SCSI status: Check Condition
(probe0:isp0:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(probe512:isp1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe512:isp1:0:0:0): CAM status: SCSI Status Error
(probe512:isp1:0:0:0): SCSI status: Check Condition
(probe512:isp1:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
umass0:2:0:-1: Attached to scbus2
umass1: <Virtual Floppy> on usbus3
umass1: SCSI over Bulk-Only; quirks = 0x0000
da1 at isp0 bus 0 scbus0 target 1 lun 0
da1: <DGC RAID 10 0223> Fixed Direct Access SCSI-4 device
da1: 400.000MB/s transfers WWNN 0x50060160bba005d6 WWPN 0x500601603ba005d6 PortID 0x11400
da1: Command Queueing enabled
da1: 512000MB (1048576000 512 byte sectors: 255H 63S/T 65270C) da0 at isp0 bus 0 scbus0 target 0 lun 0
da0: <DGC RAID 10 0223> Fixed Direct Access SCSI-4 device
da0: 400.000MB/s transfers WWNN 0x50060160bba005d6 WWPN 0x500601683ba005d6 PortID 0x11300
da0: Command Queueing enabled
da0: 512000MB (1048576000 512 byte sectors: 255H 63S/T 65270C)
da3 at isp1 bus 0 scbus1 target 1 lun 0
da3: <DGC RAID 10 0223> Fixed Direct Access SCSI-4 device
da3: 400.000MB/s transfers WWNN 0x50060160bba005d6 WWPN 0x500601613ba005d6 PortID 0x11400
da3: Command Queueing enabled
da3: 512000MB (1048576000 512 byte sectors: 255H 63S/T 65270C)
da2 at isp1 bus 0 scbus1 target 0 lun 0
da2: <DGC RAID 10 0223> Fixed Direct Access SCSI-4 device
da2: 400.000MB/s transfers WWNN 0x50060160bba005d6 WWPN 0x500601693ba005d6 PortID 0x11300
da2: Command Queueing enabled
da2: 512000MB (1048576000 512 byte sectors: 255H 63S/T 65270C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
(da0:isp0:0:0:0): READ(6). CDB: 8 0 0 1 1 0
(da0:isp0:0:0:0): CAM status: SCSI Status Error
(da0:isp0:0:0:0): SCSI status: Check Condition
(da0:isp0:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da0:isp0:0:0:0): Invalidating pack
(da0:isp0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
(da0:isp0:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da0:isp0:0:0:0): READ(10). CDB: 28 0 3e 7f ff ff 0 0 1 0
(da0:isp0:0:0:0): CAM status: SCSI Status Error
(da0:isp0:0:0:0): SCSI status: Check Condition
(da0:isp0:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da0:isp0:0:0:0): Invalidating pack
(da0:isp0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
(da0:isp0:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da2:isp1:0:0:0): READ(6). CDB: 8 0 0 1 1 0
(da2:isp1:0:0:0): CAM status: SCSI Status Error
(da2:isp1:0:0:0): SCSI status: Check Condition
(da2:isp1:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da2:isp1:0:0:0): Invalidating pack
(da2:isp1:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
(da2:isp1:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(da2:isp1:0:0:0): READ(10). CDB: 28 0 3e 7f ff ff 0 0 1 0
(da2:isp1:0:0:0): CAM status: SCSI Status Error
(da2:isp1:0:0:0): SCSI status: Check Condition
(da2:isp1:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required)
(da2:isp1:0:0:0): Invalidating pack
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: < Virtual CDROM 1.00> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da2:isp1:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0 0 0 0
(da2:isp1:0:0:0): SCSI sense: NOT READY asc:4,3 (Logical unit not ready, manual intervention required) Root mount waiting for: usbus3
umass1:3:1:-1: Attached to scbus3
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
da4 at umass-sim1 bus 1 scbus3 target 0 lun 0
da4: < Virtual Floppy 1.00> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus3 Trying to mount root from ufs:/dev/mfid0s1a
WARNING: / was not properly dismounted
ugen1.2: <American Megatrends Inc.> at usbus1
ukbd0: <Keyboard Interface> on usbus1
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
ugen1.3: <Avocent> at usbus1
ukbd1: <EP1 Interrupt> on usbus1
kbd3 at ukbd1
ums1: <EP2 Interrupt> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=1
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /work was not properly dismounted
WARNING: /db was not properly dismounted
/db: mount pending error: blocks 11386560 files 6
Может быть кто-то сталкивался или подскажет куда можно порыть.
. Глюк драйвера контроллера получается?