Загружаюсь в safe mode, работает нормально.
Если в /boot/loaeder.conf поставить hint.apic.0.disabled=1, то работает нормально, но без SMP.
Как победить ?
Код: Выделить всё
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT ,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
Logical CPUs per core: 2
real memory = 1600126976 (1526 MB)
avail memory = 1554239488 (1482 MB)
ACPI APIC Table: <IBM SERONYXP>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
MADT: Forcing active-low polarity and level trigger for SCI
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (May 23 2008 12:18:21)
acpi0: <IBM SERONYXP> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 460, 2 (4) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2200-0x22ff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 26 at device 1.0 on pci0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2300-0x23ff mem 0xfbff0000-0xfbffffff,0xfbfe0000-0xfbfeffff irq 22 at device 1.0 on pci1
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.6.0
mpt0: Capabilities: ( RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (3 Max)
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x1002> mem 0xf9ff0000-0xf9ffffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:09:6b:63:46:48
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x1002> mem 0xf9fe0000-0xf9feffff irq 25 at device 2.0 on pci2
miibus1: <MII bus> on bge1
brgphy1: <BCM5703 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:09:6b:63:46:47
bge1: [ITHREAD]
fdc0: <floppy drive controller> on acpi0
fdc0: No FDOUT register!
device_attach: fdc0 attach returned 6
fdc0: <floppy drive controller> on acpi0
fdc0: No FDOUT register!
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcd7ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited
hptrr: no controller detected.
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <CD-224E/2.9B> at ata1-master UDMA33
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM-ESXS DTN073C3UCDY10FN S23J> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing Enabled
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <IBM-ESXS DTN073C3UCDY10FN S23J> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da1: Command Queueing Enabled
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP
).