mount dvd

[Abbat]

прблема заключается в следуюсщем не монтируются dvd диски

Код: Выделить всё

mount /cdrom
mount_cd9660: /dev/acd0: Invalid argument

привсем cd монтируется на ура
P.S за глупый вопрос не бейти сильно.

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Abbat]

просьба перенести тему в UNIX as Desktop

[paradox]

Код: Выделить всё

dmesg -a

[Abbat]

Код: Выделить всё

# dmesg -a
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2337.67-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 3479699456 (3318 MB)
avail memory = 3400654848 (3243 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cf600000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  11, should be 10 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe800000-0xfe87ffff,0xd0000000-0xdfffffff,0xfe700000-0xfe7fffff irq 16 at device 2.0 on pci0
vgapci1: <VGA-compatible display> mem 0xfe880000-0xfe8fffff at device 2.1 on pci0
uhci0: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe6fbc00-0xfe6fbfff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcm0: <Intel 82801I High Definition Audio Controller> mem 0xfe6f4000-0xfe6f7fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <JMicron JMB363 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeafe000-0xfeafffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci1: <ACPI PCI bus> on pcib3
pci1: <network, ethernet> at device 0.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe6fb800-0xfe6fbbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub7
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
rl0: <D-Link DFE-530TX+ 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:95:26:61:ab
rl0: [ITHREAD]
fwohci0: <VIA Fire II (VT6306)> port 0xec00-0xec7f mem 0xfebff000-0xfebff7ff irq 16 at device 3.0 on pci4
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1e:8c:00:00:01:ff:92
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:1e:8c:01:ff:92
fwe0: Ethernet address: 02:1e:8c:01:ff:92
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:1e:8c:00:00:01:ff:92 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1398000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f,0xa080-0xa08f irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f,0xb080-0xb08f irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcb800-0xce7ff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <vendor 0x04fc USB Multi-Smart Mouse, class 0/0, rev 2.00/16.11, addr 2> on uhub6
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad10: 239372MB <WDC WD2500YS-01SHB1 20.06C06> at ata5-master SATA300
acd0: DVDR <Optiarc DVD RW AD-7203S/1.04> at ata8-master SATA150
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB  CF Reader 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB  SD Reader 0.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB  MS Reader 0.00> Removable Direct Access SCSI-2 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB  SM Reader 0.00> Removable Direct Access SCSI-2 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad10s1a
Loading configuration files.
kernel dumps on /dev/ad10s1b
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad10s1b as swap device
Starting file system checks:
/dev/ad10s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad10s1a: clean, 50224 free (8880 frags, 5168 blocks, 3.5% fragmentation)
/dev/ad10s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad10s1e: clean, 253489 free (33 frags, 31682 blocks, 0.0% fragmentation)
/dev/ad10s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad10s1f: clean, 112486345 free (150353 frags, 14041999 blocks, 0.1% fragmentation)
/dev/ad10s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad10s1d: clean, 2126133 free (1109 frags, 265628 blocks, 0.1% fragmentation)
Setting hostuuid: 80de7f81-8dfe-d511-b08e-001e8c0ec5fd.
Setting hostid: 0x5ed10e2e.
Mounting local file systems:
.
Setting hostname: ..
net.inet6.ip6.auto_linklocal:
1
 ->
0

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 00:11:95:26:61:ab
        inet 10.57.0.26 netmask 0xffffff00 broadcast 10.57.0.255
        media: Ethernet autoselect (none)
        status: no carrier
add net default: gateway 10.57.0.1
Additional routing options:
.
Starting devd.
Starting ums0 moused:
 mousechar_start
.
hw.acpi.cpu.cx_lowest:
C1
 ->
C1

Additional IP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/kde3 /usr/local/lib/mysql /usr/local/lib/pth
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp (X related).
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad10s1b...
savecore: no dumps found
Initial i386 initialization:
.
Additional ABI support:
.
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Configuring syscons:
 keymap
 keyrate
 scrnmap
 font8x16
 font8x14
 font8x8
 blanktime
 screensaver
.
Starting cron.
Local package initialization:
.
Starting background file system checks in 60 seconds.

Fri Jun 20 08:59:36 UTC 2008
rl0: link state changed to UP
Jun 20 08:59:53  login: ROOT LOGIN (root) ON ttyv0
umass1: <USB 2.0 Flash Disk, class 0/0, rev 2.00/1.00, addr 3> on uhub7
da4 at umass-sim1 bus 1 target 0 lun 0
da4: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
da4: 40.000MB/s transfers
da4: 3855MB (7897087 512 byte sectors: 255H 63S/T 491C)
umass1: at uhub7 port 4 (addr 3) disconnected
(da4:umass-sim1:1:0:0): lost device
(da4:umass-sim1:1:0:0): removing device entry
umass1: detached

[paradox]

пока что идей нет
DVD диск хоть под виндой читаеться?

[Abbat]

да диски DVD все не монтируются. а в winXP читаются нормально

[zg]

сату в биосе настраивал? у тебя сидюк саташный, попробуй врубить эмуляцию IDE, а если врублена, то вырубить, иногда бывает помогает

[manefesto]

Код: Выделить всё

man mount_udf

[Abbat]

DVD диски монтируются оказываются командой

Код: Выделить всё

mount -t udf /dev/acd0 /mnt

а можно их в fstab засунуть

Код: Выделить всё

# cat /etc/fstab
# cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ad10s1b            none            swap    sw              0       0
/dev/ad10s1a            /               ufs     rw              1       1
/dev/ad10s1e            /tmp            ufs     rw              2       2
/dev/ad10s1f            /usr            ufs     rw              2       2
/dev/ad10s1d            /var            ufs     rw              2       2
/dev/acd0               /cdrom          cd9660  ro,noauto       0       0
/dev/acd0               /cdrom          udf     ro,noauto       0       0

последнию срочку дописал сам Неработает.

[zg]

хм.. странно, фрю только с двд-болванок устанавливаю и настраиваю, ниразу такой траблы не было...

[Abbat]

sysinstall работает на УРА!! дистрибутив от linuxcentra 3DVD ставил с него. вот сmount вопросы книга по freebsd 6
там по про dvd ничего не сказона. тоесть сказона mount /cdrom и все.

[manefesto]

http://ru.wikipedia.org/wiki/Udf

[Abbat]

Код: Выделить всё

# cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ad10s1b            none            swap    sw              0       0
/dev/ad10s1a            /               ufs     rw              1       1
/dev/ad10s1e            /tmp            ufs     rw              2       2
/dev/ad10s1f            /usr            ufs     rw              2       2
/dev/ad10s1d            /var            ufs     rw              2       2
/dev/acd0               /cdrom          cd9660  ro,noauto       0       0
/dev/acd0               /mnt            udf     ro,noauto       0       0
#                                      

вот с такими параметрами dvd монтируется нормально но только в /mnt а хочется в /cdrom

[Alex Keda]

тогда уж в /dvdrom

[Abbat]

это идея