mpd4 + FreeBSD 6.3

Проблемы установки, настройки и работы Правильной Операционной Системы

Модератор: terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Ответить
Аватара пользователя
lymar
мл. сержант
Сообщения: 117
Зарегистрирован: 2008-02-03 11:54:20
Откуда: Україна
Контактная информация:
Контактная информация пользователя lymar

mpd4 + FreeBSD 6.3

Непрочитанное сообщение lymar » 2008-05-18 10:11:28

Здраствуйте! мпд настраивал по http://www.lissyara.su/?id=1258.

#cat /usr/local/etc/mpd4/mpd.conf

Код: Выделить всё

   
default:
#    load pptp0
    load pptp1
    load pptp2

pptp0:
#    new -i ng0 pptp0 pptp0        # создаём новый интерфейс ngX - имя
#    set ipcp ranges 10.53.1.1/32 10.53.1.100/32 #локальный и удалённый IP-адреса
#     не должны совпадать с уже имеющимися
#    load pptp_standart            # остальные параметры соединения стандартные

pptp1:
    new -i ng1 pptp1 pptp1
    set ipcp ranges 10.53.1.1/32 10.53.1.101/32
    load pptp_standart

pptp2:
    new -i ng2 pptp2 pptp2
    set ipcp ranges 10.53.1.1/32 10.53.1.102/32
    load pptp_standart

pptp_standart:          # описываем стандартные параметры
    set iface disable on-demand
    set bundle disable multilink
    set link yes acfcomp protocomp

    # Требуем chap авторизации
    set link no pap chap
    set link enable chap
    set link keep-alive 60 180
    set ipcp yes vjcomp
    set iface enable tcpmssfix

    # Устанавливаем DNS и Wins
    set ipcp dns 192.168.0.1
#   set ipcp nbns 192.168.0.1

    # Включаем proxy-arp
    set iface enable proxy-arp

    # Включаем компрессию данных
    set bundle enable compression

    # Включаем компрессию данных, совсестимую с Microsoft-клиентами
    set ccp yes mppc

    # Включаем шифрование, совместимое с Microsoft-клиентами
    set ccp yes mpp-e40
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    set bundle yes crypt-reqd

    # Задаем локальный адрес для входящих соединений
   set pptp self 192.168.0.1
#    set pptp self 0.0.0.0
    set iface route 192.168.0.1/24
#    set iface route default
    # Разрешаем входящие соединения
    set pptp enable incoming
    set pptp disable originate
#cat /usr/local/etc/mpd4/mpd.links

Код: Выделить всё

#pptp0:
#    set link type pptp
pptp1:
    set link type pptp
pptp2:
    set link type pptp
#cat /usr/local/etc/mpd4/mpd.links

Код: Выделить всё

usr1    "1111"  10.53.1.106
usr2    "1111"  10.53.1.108

### как получится ###
usr3    "2222"  *
usr4    "2222"  *
#ifconfig

Код: Выделить всё

ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng1: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
#cat /var/log/mpd.log

Код: Выделить всё

May 18 09:27:13 lymar mpd: PPTP: Incoming control connection from 192.168.0.30 3798 to 192.168.0.1 1723
May 18 09:27:13 lymar mpd: pptp0: attached to connection with 192.168.0.30 3798
May 18 09:27:13 lymar mpd: [pptp1] Accepting PPTP connection
May 18 09:27:13 lymar mpd: [pptp1] opening link "pptp1"...
May 18 09:27:13 lymar mpd: [pptp1] link: OPEN event
May 18 09:27:13 lymar mpd: [pptp1] LCP: Open event
May 18 09:27:13 lymar mpd: [pptp1] LCP: state change Initial --> Starting
May 18 09:27:13 lymar mpd: [pptp1] LCP: LayerStart
May 18 09:27:13 lymar mpd: [pptp1] PPTP: attaching to peer's outgoing call
May 18 09:27:13 lymar mpd: [pptp1] link: UP event
May 18 09:27:13 lymar mpd: [pptp1] link: origination is remote
May 18 09:27:13 lymar mpd: [pptp1] LCP: Up event
May 18 09:27:13 lymar mpd: [pptp1] LCP: state change Starting --> Req-Sent
May 18 09:27:13 lymar mpd: [pptp1] LCP: SendConfigReq #1
May 18 09:27:13 lymar mpd:  ACFCOMP
May 18 09:27:13 lymar mpd:  PROTOCOMP
May 18 09:27:13 lymar mpd:  MRU 1500
May 18 09:27:13 lymar mpd:  MAGICNUM ac2ae083
May 18 09:27:13 lymar mpd:  AUTHPROTO CHAP MSOFTv2
May 18 09:27:13 lymar mpd: [pptp1] LCP: rec'd Configure Request #0 (Req-Sent)
May 18 09:27:13 lymar mpd:  MRU 1400
May 18 09:27:13 lymar mpd:  MAGICNUM 656b40bd
May 18 09:27:13 lymar mpd:  PROTOCOMP
May 18 09:27:13 lymar mpd:  ACFCOMP
May 18 09:27:13 lymar mpd:  CALLBACK 6
May 18 09:27:13 lymar mpd: [pptp1] LCP: SendConfigRej #0
May 18 09:27:13 lymar mpd:  CALLBACK 6
May 18 09:27:13 lymar mpd: [pptp1] LCP: rec'd Configure Ack #1 (Req-Sent)
May 18 09:27:13 lymar mpd:  ACFCOMP
May 18 09:27:13 lymar mpd:  PROTOCOMP
May 18 09:27:13 lymar mpd:  MRU 1500
May 18 09:27:13 lymar mpd:  MAGICNUM ac2ae083
May 18 09:27:13 lymar mpd:  AUTHPROTO CHAP MSOFTv2
May 18 09:27:13 lymar mpd: [pptp1] LCP: state change Req-Sent --> Ack-Rcvd
May 18 09:27:13 lymar mpd: [pptp1] LCP: rec'd Configure Request #1 (Ack-Rcvd)
May 18 09:27:13 lymar mpd:  MRU 1400
May 18 09:27:13 lymar mpd:  MAGICNUM 656b40bd
May 18 09:27:13 lymar mpd:  PROTOCOMP
May 18 09:27:13 lymar mpd:  ACFCOMP
May 18 09:27:13 lymar mpd: [pptp1] LCP: SendConfigAck #1
May 18 09:27:13 lymar mpd:  MRU 1400
May 18 09:27:13 lymar mpd:  MAGICNUM 656b40bd
May 18 09:27:13 lymar mpd:  PROTOCOMP
May 18 09:27:13 lymar mpd:  ACFCOMP
May 18 09:27:13 lymar mpd: [pptp1] LCP: state change Ack-Rcvd --> Opened
May 18 09:27:13 lymar mpd: [pptp1] LCP: auth: peer wants nothing, I want CHAP
May 18 09:27:13 lymar mpd: [pptp1] CHAP: sending CHALLENGE len:17
May 18 09:27:13 lymar mpd: [pptp1] LCP: LayerUp
May 18 09:27:13 lymar mpd: [pptp1] LCP: rec'd Ident #2 (Opened)
May 18 09:27:13 lymar mpd:  MESG: MSRASV5.10
May 18 09:27:13 lymar mpd: [pptp1] LCP: rec'd Ident #3 (Opened)
May 18 09:27:13 lymar mpd:  MESG: MSRAS-0-OKSANA
May 18 09:27:13 lymar mpd: [pptp1] CHAP: rec'd RESPONSE #1
May 18 09:27:13 lymar mpd:  Name: "usr3"
May 18 09:27:13 lymar mpd: [pptp1] AUTH: Auth-Thread started
May 18 09:27:13 lymar mpd: [pptp1] AUTH: Trying INTERNAL
May 18 09:27:13 lymar mpd: [pptp1] AUTH: INTERNAL returned undefined
May 18 09:27:13 lymar mpd: [pptp1] AUTH: Auth-Thread finished normally
May 18 09:27:13 lymar mpd: [pptp1] CHAP: ChapInputFinish: status undefined
May 18 09:27:13 lymar mpd:  Response is valid
May 18 09:27:13 lymar mpd:  Reply message: S=084FCD894C0D5C050F5AA1E0673E3562C0980425
May 18 09:27:13 lymar mpd: [pptp1] CHAP: sending SUCCESS len:42
May 18 09:27:13 lymar mpd: [pptp1] LCP: authorization successful
May 18 09:27:13 lymar mpd: [pptp1] Bundle up: 1 link, total bandwidth 64000 bps
May 18 09:27:13 lymar mpd: [pptp1] IPCP: Open event
May 18 09:27:13 lymar mpd: [pptp1] IPCP: state change Initial --> Starting
May 18 09:27:13 lymar mpd: [pptp1] IPCP: LayerStart
May 18 09:27:13 lymar mpd: [pptp1] CCP: Open event
May 18 09:27:13 lymar mpd: [pptp1] CCP: state change Initial --> Starting
May 18 09:27:13 lymar mpd: [pptp1] CCP: LayerStart
May 18 09:27:13 lymar mpd: [pptp1] IPCP: Up event
May 18 09:27:13 lymar mpd: [pptp1] IPCP: state change Starting --> Req-Sent
May 18 09:27:13 lymar mpd: [pptp1] IPCP: SendConfigReq #1
May 18 09:27:13 lymar mpd:  IPADDR 10.53.1.1
May 18 09:27:13 lymar mpd:  COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
May 18 09:27:13 lymar mpd: [pptp1] CCP: Up event
May 18 09:27:13 lymar mpd: [pptp1] CCP: state change Starting --> Req-Sent
May 18 09:27:13 lymar mpd: [pptp1] CCP: SendConfigReq #1
May 18 09:27:13 lymar mpd:  MPPC
May 18 09:27:13 lymar mpd:    0x01000060:MPPE(40, 128 bits), stateless
May 18 09:27:13 lymar mpd: [pptp1] IPCP: rec'd Configure Reject #1 (Req-Sent)
May 18 09:27:13 lymar mpd:  COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
May 18 09:27:13 lymar mpd: [pptp1] IPCP: SendConfigReq #2
May 18 09:27:13 lymar mpd:  IPADDR 10.53.1.1
May 18 09:27:13 lymar mpd: [pptp1] CCP: rec'd Configure Nak #1 (Req-Sent)
May 18 09:27:13 lymar mpd:  MPPC
May 18 09:27:13 lymar mpd:    0x01000040:MPPE(128 bits), stateless
May 18 09:27:13 lymar mpd: [pptp1] CCP: SendConfigReq #2

May 18 09:27:13 lymar mpd:  MPPC
May 18 09:27:13 lymar mpd:    0x01000040:MPPE(128 bits), stateless
May 18 09:27:13 lymar mpd: [pptp1] IPCP: rec'd Configure Ack #2 (Req-Sent)
May 18 09:27:13 lymar mpd:  IPADDR 10.53.1.1
May 18 09:27:13 lymar mpd: [pptp1] IPCP: state change Req-Sent --> Ack-Rcvd
May 18 09:27:13 lymar mpd: [pptp1] CCP: rec'd Configure Ack #2 (Req-Sent)
May 18 09:27:13 lymar mpd:  MPPC
May 18 09:27:13 lymar mpd:    0x01000040:MPPE(128 bits), stateless
May 18 09:27:13 lymar mpd: [pptp1] CCP: state change Req-Sent --> Ack-Rcvd
May 18 09:27:15 lymar mpd: [pptp1] IPCP: rec'd Configure Request #6 (Ack-Rcvd)
May 18 09:27:15 lymar mpd:  IPADDR 0.0.0.0
May 18 09:27:15 lymar mpd:    NAKing with 10.53.1.101
May 18 09:27:15 lymar mpd:  PRIDNS 0.0.0.0
May 18 09:27:15 lymar mpd:    NAKing with 192.168.0.1
May 18 09:27:15 lymar mpd:  PRINBNS 0.0.0.0
May 18 09:27:15 lymar mpd:  SECDNS 0.0.0.0
May 18 09:27:15 lymar mpd:  SECNBNS 0.0.0.0
May 18 09:27:15 lymar mpd: [pptp1] IPCP: SendConfigRej #6
May 18 09:27:15 lymar mpd:  PRINBNS 0.0.0.0
May 18 09:27:15 lymar mpd:  SECDNS 0.0.0.0
May 18 09:27:15 lymar mpd:  SECNBNS 0.0.0.0
May 18 09:27:15 lymar mpd: [pptp1] CCP: rec'd Configure Request #7 (Ack-Rcvd)
May 18 09:27:15 lymar mpd:  MPPC
May 18 09:27:15 lymar mpd:    0x01000001:MPPC, stateless
May 18 09:27:15 lymar mpd: [pptp1] CCP: SendConfigNak #7
May 18 09:27:15 lymar mpd:  MPPC
May 18 09:27:15 lymar mpd:    0x01000060:MPPE(40, 128 bits), stateless
May 18 09:27:15 lymar mpd: [pptp1] IPCP: rec'd Configure Request #8 (Ack-Rcvd)
May 18 09:27:15 lymar mpd:  IPADDR 0.0.0.0
May 18 09:27:15 lymar mpd:    NAKing with 10.53.1.101
May 18 09:27:15 lymar mpd:  PRIDNS 0.0.0.0
May 18 09:27:15 lymar mpd:    NAKing with 192.168.0.1
May 18 09:27:15 lymar mpd: [pptp1] IPCP: SendConfigNak #8
May 18 09:27:15 lymar mpd:  IPADDR 10.53.1.101
May 18 09:27:15 lymar mpd:  PRIDNS 192.168.0.1
May 18 09:27:15 lymar mpd: [pptp1] CCP: rec'd Configure Request #9 (Ack-Rcvd)
May 18 09:27:15 lymar mpd:  MPPC
May 18 09:27:15 lymar mpd:    0x01000040:MPPE(128 bits), stateless
May 18 09:27:15 lymar mpd: [pptp1] CCP: SendConfigAck #9
May 18 09:27:15 lymar mpd:  MPPC
May 18 09:27:15 lymar mpd:    0x01000040:MPPE(128 bits), stateless
May 18 09:27:15 lymar mpd: [pptp1] CCP: state change Ack-Rcvd --> Opened
May 18 09:27:15 lymar mpd: [pptp1] CCP: LayerUp
May 18 09:27:15 lymar mpd:   Compress using: mppc (MPPE(128 bits), stateless)
May 18 09:27:15 lymar mpd: Decompress using: mppc (MPPE(128 bits), stateless)
May 18 09:27:15 lymar mpd: [pptp1] IPCP: rec'd Configure Request #10 (Ack-Rcvd)
May 18 09:27:15 lymar mpd:  IPADDR 10.53.1.101
May 18 09:27:15 lymar mpd:    10.53.1.101 is OK
May 18 09:27:15 lymar mpd:  PRIDNS 192.168.0.1
May 18 09:27:15 lymar mpd: [pptp1] IPCP: SendConfigAck #10
May 18 09:27:15 lymar mpd:  IPADDR 10.53.1.101
May 18 09:27:15 lymar mpd:  PRIDNS 192.168.0.1
May 18 09:27:15 lymar mpd: [pptp1] IPCP: state change Ack-Rcvd --> Opened
May 18 09:27:15 lymar mpd: [pptp1] IPCP: LayerUp
May 18 09:27:15 lymar mpd:   10.53.1.1 -> 10.53.1.101
May 18 09:27:15 lymar mpd: [pptp1] IFACE: Up event
May 18 09:27:15 lymar mpd: [pptp1] no interface to proxy arp on for 10.53.1.101
May 18 09:27:15 lymar mpd: [pptp1] IFACE: Add route 192.168.0.1/24 10.53.1.101 failed: File exists
May 18 09:27:35 lymar mpd: [pptp1] LCP: rec'd Terminate Request #11 (Opened)
May 18 09:27:35 lymar mpd: [pptp1] LCP: state change Opened --> Stopping
May 18 09:27:35 lymar mpd: [pptp1] AUTH: Accounting data for user usr3: 22 seconds, 4334 octets in, 273 octets out
May 18 09:27:35 lymar mpd: [pptp1] Bundle up: 0 links, total bandwidth 9600 bps
May 18 09:27:35 lymar mpd: [pptp1] IPCP: Close event
May 18 09:27:35 lymar mpd: [pptp1] IPCP: state change Opened --> Closing
May 18 09:27:35 lymar mpd: [pptp1] IPCP: SendTerminateReq #3
May 18 09:27:35 lymar mpd: [pptp1] error writing len 8 frame to bypass: Network is down
May 18 09:27:35 lymar mpd: [pptp1] IPCP: LayerDown
May 18 09:27:35 lymar mpd: [pptp1] IFACE: Down event
May 18 09:27:35 lymar mpd: [pptp1] CCP: Close event
May 18 09:27:35 lymar mpd: [pptp1] CCP: state change Opened --> Closing
May 18 09:27:35 lymar mpd: [pptp1] CCP: SendTerminateReq #3
May 18 09:27:35 lymar mpd: [pptp1] error writing len 8 frame to bypass: Network is down
May 18 09:27:35 lymar mpd: [pptp1] CCP: LayerDown
May 18 09:27:35 lymar mpd: [pptp1] IPCP: Down event
May 18 09:27:35 lymar mpd: [pptp1] IPCP: LayerFinish
May 18 09:27:35 lymar mpd: [pptp1] No NCPs left. Closing links...
May 18 09:27:35 lymar mpd: [pptp1] closing link "pptp1"...
May 18 09:27:35 lymar mpd: [pptp1] IPCP: state change Closing --> Initial
May 18 09:27:35 lymar mpd: [pptp1] CCP: Down event
May 18 09:27:35 lymar mpd: [pptp1] CCP: LayerFinish
May 18 09:27:35 lymar mpd: [pptp1] CCP: state change Closing --> Initial
May 18 09:27:35 lymar mpd: [pptp1] AUTH: Cleanup
May 18 09:27:35 lymar mpd: [pptp1] LCP: SendTerminateAck #2
May 18 09:27:35 lymar mpd: [pptp1] LCP: LayerDown
May 18 09:27:35 lymar mpd: [pptp1] link: CLOSE event
May 18 09:27:35 lymar mpd: [pptp1] LCP: Close event
May 18 09:27:35 lymar mpd: [pptp1] LCP: state change Stopping --> Closing
May 18 09:27:37 lymar mpd: [pptp1] LCP: state change Closing --> Closed
May 18 09:27:37 lymar mpd: [pptp1] LCP: LayerFinish
May 18 09:27:37 lymar mpd: pptp0-0: clearing call
May 18 09:27:37 lymar mpd: pptp0-0: killing channel
May 18 09:27:37 lymar mpd: [pptp1] PPTP call terminated
May 18 09:27:37 lymar mpd: [pptp1] link: DOWN event
May 18 09:27:37 lymar mpd: [pptp1] LCP: Down event
May 18 09:27:37 lymar mpd: [pptp1] LCP: state change Closed --> Initial
May 18 09:27:37 lymar mpd: pptp0: closing connection with 192.168.0.30 3798
May 18 09:27:37 lymar mpd: pptp0: killing connection with 192.168.0.30 3798
С форточки ..подключаеться без проблем но интернета нету (.
возможно проблемма в роутингах?.. хелп
Вернуться к началу
Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
Вернуться к началу
Аватара пользователя
ProFTP
подполковник
Сообщения: 3388
Зарегистрирован: 2008-04-13 1:50:04
Откуда: %&й
Контактная информация:
Контактная информация пользователя ProFTP

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение ProFTP » 2008-05-18 11:55:05

это клиент?
замути лучше pptp
Pеrl FAQ
perl -e 'print join"",map $$_[rand@$_],([0..9,'a'..'z','A'..'Z'])x30'
ИзображениеИзображение
Вернуться к началу
Гость
проходил мимо

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение Гость » 2008-05-18 20:12:52

ProFTP писал(а):это клиент?
замути лучше pptp
хто клиент?.. логи приведены сервера ... подключаюсь с винды (винда клиент) .. все воедняеться ..коннект есть .. но интернет там не работает.. :?
Вернуться к началу
Аватара пользователя
ProFTP
подполковник
Сообщения: 3388
Зарегистрирован: 2008-04-13 1:50:04
Откуда: %&й
Контактная информация:
Контактная информация пользователя ProFTP

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение ProFTP » 2008-05-18 21:02:20

а муршрутизацию кто будет натсраивать?
покажы

Код: Выделить всё

netstat -rn
Pеrl FAQ
perl -e 'print join"",map $$_[rand@$_],([0..9,'a'..'z','A'..'Z'])x30'
ИзображениеИзображение
Вернуться к началу
Аватара пользователя
lymar
мл. сержант
Сообщения: 117
Зарегистрирован: 2008-02-03 11:54:20
Откуда: Україна
Контактная информация:
Контактная информация пользователя lymar

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение lymar » 2008-05-18 21:09:01

[root@lymar ~]# ifconfig

Код: Выделить всё

rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 172.20.146.159 netmask 0xfffffc00 broadcast 172.20.147.255
        ether 00:06:4f:5c:d2:65
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:06:4f:5c:d0:fc
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        ether 00:06:4f:5c:cf:5c
        media: Ethernet autoselect (none)
        status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
pfsync0: flags=0<> mtu 2020
        syncpeer: 224.0.0.240 maxupd: 128
ng0: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
ng1: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> mtu 1396
        inet 10.53.1.1 --> 10.53.1.101 netmask 0xffffffff
ng2: flags=8890<POINTOPOINT,NOARP,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
        inet 194.146.190.129 --> 193.108.248.13 netmask 0xffffffff
        Opened by PID 1224
[root@lymar ~]# netstat -rn

Код: Выделить всё

Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            193.108.248.13     UGS         0      162   tun0
10.0.0.1           172.20.144.1       UGHS        0      222    rl0
10.53.1.101        10.53.1.1          UH          0        0    ng1
127.0.0.1          127.0.0.1          UH          0       67    lo0
172.20.144/22      link#1             UC          0        0    rl0
172.20.144.1       00:30:48:8d:f7:eb  UHLW        2        0    rl0   1198
192.168.0          link#2             UC          0        0    rl1
192.168.0.30       00:16:d4:d0:1c:d6  UHLW        1     3429    rl1   1024
192.168.1          link#3             UC          0        0    rl2
193.108.248.13     194.146.190.129    UH          1        0   tun0

Internet6:
Destination                       Gateway                       Flags      Netif Expire
::1                               ::1                           UHL         lo0
fe80::%lo0/64                     fe80::1%lo0                   U           lo0
fe80::1%lo0                       link#5                        UHL         lo0
ff01:5::/32                       fe80::1%lo0                   UC          lo0
ff01:b::/32                       link#11                       UC         tun0
ff02::%lo0/32                     fe80::1%lo0                   UC          lo0
ff02::%tun0/32                    link#11                       UC         tun0
Вернуться к началу
Аватара пользователя
schizoid
подполковник
Сообщения: 3228
Зарегистрирован: 2007-03-03 17:32:31
Откуда: Украина, Чернигов
Контактная информация:
Контактная информация пользователя schizoid

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение schizoid » 2008-05-19 10:18:42

а НАТ для 10.53.1.101 настроен?
ядерный взрыв...смертельно красиво...жаль, что не вечно...
Вернуться к началу
Аватара пользователя
lymar
мл. сержант
Сообщения: 117
Зарегистрирован: 2008-02-03 11:54:20
Откуда: Україна
Контактная информация:
Контактная информация пользователя lymar

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение lymar » 2008-05-19 11:47:47

Код: Выделить всё

ext_if="tun0" #VPN tunel
ext_loc="rl0" #WAN 
int_if1="rl1" #192.168.0.0/24 
ext_if4="ng1"

table <home> persist { 192.168.0.0/24, 10.53.1.0/32 }

nat on $ext_loc inet from <home> to any -> ($ext_loc) 
nat on $ext_if inet from <home> to any -> ($ext_if) 
nat on $ext_if4 inet from <home> to any -> ($ext_if4)
Вернуться к началу
AzureZ
мл. сержант
Сообщения: 124
Зарегистрирован: 2007-11-06 17:07:27
Откуда: Москва

Re: mpd4 + FreeBSD 6.3

Непрочитанное сообщение AzureZ » 2008-05-19 14:37:38

Хм. А зачем столько натов?
И вот тут

Код: Выделить всё

table <home> persist { 192.168.0.0/24, 10.53.1.0/32 }
10.53.1.0/32 Нет ли тут ошибки?
Вернуться к началу