смотрим hardware notes
Adapters supported by the sk(4) driver include:
3Com 3C940 single port, 1000baseT adapter
3Com 3C2000-T single port, 1000baseT adapter
Belkin F5D5005 single port, 1000baseT adapter
D-Link DGE-530T single port, 1000baseT adapter
Linksys (revision 2) single port, 1000baseT adapter
SK-9521 SK-NET GE-T single port, 1000baseT adapter
SK-9821 SK-NET GE-T single port, 1000baseT adapter
SK-9822 SK-NET GE-T dual port, 1000baseT adapter
SK-9841 SK-NET GE-LX single port, single mode fiber adapter
SK-9842 SK-NET GE-LX dual port, single mode fiber adapter
SK-9843 SK-NET GE-SX single port, multimode fiber adapter
SK-9844 SK-NET GE-SX dual port, multimode fiber adapter
SMC 9452TX single port, 1000baseT adapter
Код: Выделить всё
# less /var/run/dmesg.boot
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.2-RELEASE-p3 #0: Sat Jan 11 02:38:15 UTC 2014
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC i386
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU 3065 @ 2.33GHz (2327.55-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 0x6 Model = 0xf Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 2147483648 (2048 MB)
avail memory = 2071318528 (1975 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL DP43BF >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F626F40/0x000000007F627E40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DP43BF> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xe3080000-0xe3083fff irq 17 at device 0.1 on pci1
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xf0c0-0xf0df irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xf0a0-0xf0bf irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xf080-0xf09f irq 18 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xe3402000-0xe34023ff irq 18 at device 26.7 on pci0
usbus3: waiting for BIOS to give up control
usbus3: timed out waiting for BIOS
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xe3300000-0xe33001ff irq 16 at device 0.0 on pci2
ata2: <ATA channel> at channel 0 on atapci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci7: <ACPI PCI bus> on pcib7
bge0: <Broadcom BCM57780 A1, ASIC rev. 0x57780001> mem 0xe3200000-0xe320ffff irq 17 at device 0.0 on pci7
bge0: CHIP ID 0x57780001; ASIC REV 0x57780; CHIP REV 0x577800; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57780 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:22:4d:48:4a:86
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xf060-0xf07f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xf040-0xf05f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xf020-0xf03f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xe3401000-0xe34013ff irq 23 at device 29.7 on pci0
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci32: <ACPI PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f,0xf140-0xf14f irq 19 at device 31.2 on pci0
ata3: <ATA channel> at channel 0 on atapci1
ata4: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0ff,0xf0e0-0xf0ef irq 19 at device 31.5 on pci0
ata5: <ATA channel> at channel 0 on atapci2
ata6: <ATA channel> at channel 1 on atapci2
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xce800-0xd0fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <ST3250410AS 3.AAC> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1163776953 Hz quality 1000
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <PIONEER DVD-RW DVR-112D 1.24> Removable CD-ROM SCSI-0 device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Код: Выделить всё
# pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x00298086 chip=0x2e208086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '4 Series Chipset DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00298086 chip=0x2e218086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '4 Series Chipset PCI Express Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:26:0: class=0x0c0300 card=0x00298086 chip=0x3a378086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x00298086 chip=0x3a388086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:26:2: class=0x0c0300 card=0x00298086 chip=0x3a398086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x00298086 chip=0x3a3c8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib2@pci0:0:28:0: class=0x060400 card=0x00298086 chip=0x3a408086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:1: class=0x060400 card=0x00298086 chip=0x3a428086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Port 2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:2: class=0x060400 card=0x00298086 chip=0x3a448086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:3: class=0x060400 card=0x00298086 chip=0x3a468086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:4: class=0x060400 card=0x00298086 chip=0x3a488086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Root Port 5'
class = bridge
subclass = PCI-PCI
pcib7@pci0:0:28:5: class=0x060400 card=0x00298086 chip=0x3a4a8086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) PCI Express Root Port 6'
class = bridge
subclass = PCI-PCI
uhci3@pci0:0:29:0: class=0x0c0300 card=0x00298086 chip=0x3a348086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci4@pci0:0:29:1: class=0x0c0300 card=0x00298086 chip=0x3a358086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
uhci5@pci0:0:29:2: class=0x0c0300 card=0x00298086 chip=0x3a368086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB UHCI Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x00298086 chip=0x3a3a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) USB2 EHCI Controller'
class = serial bus
subclass = USB
pcib8@pci0:0:30:0: class=0x060401 card=0x00298086 chip=0x244e8086 rev=0x90 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00298086 chip=0x3a168086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JIR (ICH10R) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci1@pci0:0:31:2: class=0x01018f card=0x00298086 chip=0x3a208086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) 4 port SATA IDE Controller'
class = mass storage
subclass = ATA
none0@pci0:0:31:3: class=0x0c0500 card=0x00298086 chip=0x3a308086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) SMBus Controller'
class = serial bus
subclass = SMBus
atapci2@pci0:0:31:5: class=0x010185 card=0x00298086 chip=0x3a268086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82801JI (ICH10 Family) 2 port SATA IDE Controller'
class = mass storage
subclass = ATA
vgapci0@pci0:1:0:0: class=0x030000 card=0x84901043 chip=0x0a6510de rev=0xa2 hdr=0x00
vendor = 'nVidia Corporation'
device = 'GT218 [GeForce 210]'
class = display
subclass = VGA
hdac0@pci0:1:0:1: class=0x040300 card=0x84901043 chip=0x0be310de rev=0xa1 hdr=0x00
vendor = 'nVidia Corporation'
device = 'High Definition Audio Controller'
class = multimedia
subclass = HDA
atapci0@pci0:2:0:0: class=0x01018f card=0x610111ab chip=0x610111ab rev=0xb2 hdr=0x00
vendor = 'Marvell Technology Group Ltd.'
device = '88SE6101/6102 single-port PATA133 interface'
class = mass storage
subclass = ATA
bge0@pci0:7:0:0: class=0x020000 card=0x00298086 chip=0x169114e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetLink BCM57788 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
Код: Выделить всё
# ifconfig
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
ether 00:22:4d:48:4a:86
inet 10.0.0.9 netmask 0xffffff00 broadcast 10.0.0.255
inet6 fe80::222:4dff:fe48:4a86%bge0 prefixlen 64 scopeid 0x5
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
1. Где?
2. Что за хрень?
И, Лис, может все-таки спойлер приделать, а то такие листинги сложно воспринимаются.
