Помогите разобратся с Wi-Fi

[Alfo]

Удалённо настраиваю wi-fi на компе так что нет возможности глянуть что там за вай-фай карта, но скорее всего старая, при старте компа выдаёт вот что, сразу скажу что если делать открытую сеть без шифрования то всё работает на ура.

Код: Выделить всё

hostapd: ath0: DRIVER Error enabling WPA/802.1X!

ifconfig

Код: Выделить всё

ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:17:9a:0d:3e:6b
        inet 192.168.233.1 netmask 0xffffff00 broadcast 192.168.233.255
        media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (autoselect <hostap>)
        status: no carrier
        ssid vile channel 12 (2467 Mhz 11g)
        authmode AUTO privacy OFF txpower 31.5 scanvalid 60 bgscan
        bgscanintvl 300 bgscanidle 250 roam:rssi11g 7 roam:rate11g 5
        protmode CTS burst dtimperiod 1

rc.conf

Код: Выделить всё

hostapd_enable="YES"
ifconfig_ath0="inet 192.168.233.1  netmask 255.255.255.0 mediaopt hostap"

hostapd.conf

Код: Выделить всё

interface=ath0
driver=bsd
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=4
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=wheel
own_ip_addr=127.0.0.1
ssid=vile
wpa=3
wpa_pairwise=TKIP CCMP
wpa_passphrase=87654321
wpa_key_mgmt=WPA-PSK

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Alfo]

Думается мне что может быть проблема в том,что карта не поддерживает WPA, есть у кого-нибудь конфиг чтобы попробывать под WEP Её запустить, в инете все примеры только на WPA

[hizel]

man ath

Код: Выделить всё

ifconfig ath0 inet 192.168.0.10 netmask 255.255.255.0 ssid my_ap wepmode on wepkey 0x1234567890 mode 11g mediaopt hostap

[Alfo]

Код: Выделить всё

ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:17:9a:0d:3e:6b
        inet 192.168.233.1 netmask 0xffffff00 broadcast 192.168.233.255
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: associated
        ssid vile channel 2 (2417 Mhz 11g) bssid 00:17:9a:0d:3e:6b
        authmode OPEN privacy ON deftxkey UNDEF wepkey 1:40-bit txpower 31.5
        scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11g 7
        roam:rate11g 5 protmode CTS burst dtimperiod 1

C WEP завелась...видимо всё таки или у меня конфиг hostapd не правильный, либо карта реально WPA не поддерживает

[Alfo]

Вариант с картой отпадает, при смене карты точно такая же ситуация...Люди помогите настроить вай-файку ) На всякий случай приведу конфиг ядра, вдруг я там что нужное обрезал

Код: Выделить всё

#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           gate
#hints          "GENERIC.hints"         # Default places to look for devices.

options         IPFIREWALL              
options         IPFIREWALL_VERBOSE      
options         IPFIREWALL_VERBOSE_LIMIT=100
options         IPFIREWALL_FORWARD     
options         IPDIVERT              
options         DUMMYNET               
options         IPFIREWALL_DEFAULT_TO_ACCEPT
options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
#options        SCTP                    # Stream Control Transmission Protocol
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big directories
options         UFS_GJOURNAL            # Enable gjournal-based UFS journaling
#options        MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires NFSCLIENT
#options        MSDOSFS                 # MSDOS Filesystem
#options        CD9660                  # ISO 9660 Filesystem
#options        PROCFS                  # Process filesystem (requires PSEUDOFS)
#options        PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_PART_GPT           # GUID Partition Tables.
options         GEOM_LABEL              # Provides labelization
options         COMPAT_43TTY            # BSD 4.3 TTY compat [KEEP THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_FREEBSD6         # Compatible with FreeBSD6
#options        SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
#options        KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
#options        KBD_INSTALL_CDEV        # install a CDEV entry in /dev
#options        ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         STOP_NMI                # Stop CPUS using NMI instead of IPI
options         AUDIT                   # Security event auditing
options         NETGRAPH
options         NETGRAPH_BPF
options         NETGRAPH_IFACE
options         NETGRAPH_KSOCKET
options         NETGRAPH_MPPC_ENCRYPTION
options         NETGRAPH_PPP
options         NETGRAPH_PPTPGRE
options         NETGRAPH_SOCKET
options         NETGRAPH_TCPMSS
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
#device         psm             # PS/2 mouse

device          kbdmux          # keyboard multiplexer

device          vga             # VGA video card driver

#device         splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

#device         agp             # support several AGP chipsets

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device         cbb             # cardbus (yenta) bridge
#device         pccard          # PC Card (16-bit) bus
#device         cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
#device         sio             # 8250, 16[45]50 based serial ports
#device         uart            # Generic UART driver

# Parallel port
#device         ppc
#device         ppbus           # Parallel port bus (required)
#device         lpt             # Printer
#device         plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da
#device         puc

# PCI Ethernet NICs.
#device         de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit Ethernet Card
#device         ixgb            # Intel PRO/10GbE Ethernet Card
#device         le              # AMD Am7900 LANCE and Am79C9xx PCnet
#device         txp             # 3Com 3cR990 (``Typhoon'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bce             # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         msk             # Marvell/SysKonnect Yukon II Gigabit Ethernet
#device         nfe             # nVidia nForce MCP on-board Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
#device         pcn             # AMD Am79C97x PCI 10/100 (precedence over 'le')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         stge            # Sundance/Tamarack TC9021 gigabit Ethernet
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.  pccard NICs included.
#device         cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device         ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device         ex              # Intel EtherExpress Pro/10 and Pro/10+
#device         ep              # Etherlink III based cards
#device         fe              # Fujitsu MB8696x based cards
#device         ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device         sn              # SMC's 9000 series of Ethernet chips
#device         xe              # Xircom pccard Ethernet

# Wireless NIC cards
device          wlan            # 802.11 support
device          wlan_wep        # 802.11 WEP support
device          wlan_ccmp       # 802.11 CCMP support
device          wlan_tkip       # 802.11 TKIP support
device          wlan_amrr       # AMRR transmit rate control algorithm
device          wlan_scan_ap    # 802.11 AP mode scanning
device          wlan_scan_sta   # 802.11 STA mode scanning
device          an              # Aironet 4500/4800 802.11 wireless NICs.
device          ath             # Atheros pci/cardbus NIC's
device          ath_hal         # Atheros HAL (Hardware Access Layer)
device          ath_rate_sample # SampleRate tx rate control for ath
device          awi             # BayStack 660 and others
device          ral             # Ralink Technology RT2500 wireless NICs.
device          wi              # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
device          wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)
device          firmware        # firmware assist module

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device          bpf             # Berkeley packet filter

# USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         ehci            # EHCI PCI->USB interface (USB 2.0)
#device         usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         ural            # Ralink Technology RT2500USB wireless NICs
#device         rum             # Ralink Technology RT2501USB wireless NICs
#device         urio            # Diamond Rio 500 MP3 player
#device         uscanner        # Scanners
# USB Ethernet, requires miibus
#device         aue             # ADMtek USB Ethernet
#device         axe             # ASIX Electronics USB Ethernet
#device         cdce            # Generic USB over Ethernet
#device         cue             # CATC USB Ethernet
#device         kue             # Kawasaki LSI USB Ethernet
#device         rue             # RealTek RTL8150 USB Ethernet

# FireWire support
#device         firewire        # FireWire bus code
#device         sbp             # SCSI over FireWire (Requires scbus and da)
#device         fwe             # Ethernet over FireWire (non-standard!)
#device         fwip            # IP over FireWire (RFC 2734,3146)
#device         dcons           # Dumb console driver
#device         dcons_crom      # Configuration ROM for dcons

[InventoR]

вот с этим конфом у меня помоему работало.
попытался прикрутить radius, но пока не разобрался.

Код: Выделить всё

interface=ath0
bridge=bridge0
#driver=hostap
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
debug=4
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=my_wifi
wpa=3
wpa_pairwise=CCMP
wpa_passphrase=12345678
wpa_key_mgmt=WPA-PSK

[dot22]

Вариант с картой отпадает, при смене карты точно такая же ситуация...Люди помогите настроить вай-файку ) На всякий случай приведу конфиг ядра, вдруг я там что нужное обрезал

Если еще вопрос актуален .)

Глянь в логах - при активизации hostap'a не появляется ли строка типа "kernel: ieee80211_load_module: load the wlan_xauth module by hand for now"
Если есть такая, попробуй подгрузить модуль вручную - kldload wlan_xauth
А после этого попробуй перезапустить hostaupd
/usr/sbin/hostapd /etc/hostap.conf

[eswees]

dot22, Спасибо. Сразу и не глянул в логи.))