Проблема с сетевой D-Link'а

[savio]

Есть сервер на борту которого

Код: Выделить всё

uname -a
FreeBSD 6.2-RELEASE-p12 FreeBSD 6.2-RELEASE-p12 #6: Sun Feb 15 15:21:47 EET 2009     /usr/obj/usr/src/sys/kernel  i386

возникла необходимость поставить туда две D-Link'овские сетевухи. Установил, фряха не видит их. установил на другой сервак. появились интерфейсы ste0 и ste1. На сервере где не видно сетевух ядро скомпилено с

Код: Выделить всё

...
device          ste             # Sundance ST201 (D-Link DFE-550TX)
...

пробовал подгрузить как модуль

Код: Выделить всё

#kldload if_ste
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
kldload: can't load if_ste: File exists

что может быть не так?

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[paradox]

uname -a
pciconf -lvc

с двух серверов

[paradox]

имелось ввиду с установленой сетевкой по очереди на обеих

[savio]

проблемный сервер

Код: Выделить всё

#uname -a
FreeBSD  6.2-RELEASE-p12 FreeBSD 6.2-RELEASE-p12 #6: Sun Feb 15 15:21:47 EET 2009     root@oblrada.km.ua:/usr/obj/usr/src/sys/kernek i386
#

Код: Выделить всё

# pciconf -lv
agp0@pci0:0:0:  class=0x060000 card=0x71908086 chip=0x71908086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:7:1:       class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
    class    = mass storage
    subclass = ATA
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
    class    = serial bus
    subclass = USB
none0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
    class    = bridge
none1@pci0:14:0:        class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00
    vendor   = 'Sundance Technology Inc'
    class    = network
    subclass = ethernet
vr0@pci0:16:0:  class=0x020000 card=0x14051186 chip=0x31061106 rev=0x8b hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT6105M/LOM Rhine III PCI Fast Ethernet Controller'
    class    = network
    subclass = ethernet
none2@pci1:0:0: class=0x030000 card=0x00000000 chip=0x002d10de rev=0x15 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
    class    = display
    subclass = VGA
#

[paradox]

Код: Выделить всё

none1@pci0:14:0:        class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31 hdr=0x00    
vendor   = 'Sundance Technology Inc'    class    = network    subclass = ethernet

сетевка?

драйвера нет
или не видит
или или
сравнивай с рабочим сервером

[savio]

сервер на котором детектится

Код: Выделить всё

[root@hr1 /usr/home/savio]# uname -a
FreeBSD hr1.home 7.1-RELEASE FreeBSD 7.1-RELEASE #3: Thu Feb  5 16:58:40 EET 2009     root@hr1.home:/usr/obj/usr/src/sys/KERNEL  i386
[root@hr1 /usr/home/savio]#

Код: Выделить всё

[root@hr1 /usr/home/savio]# pciconf -lvc
hostb0@pci0:0:0:0:      class=0x060000 card=0x817a1043 chip=0x27708086 rev=0x02                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82945G/GZ/P/PL Host Bridge/DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
    cap 09[e0] = vendor (length 9) Intel cap 5 version 1
vgapci0@pci0:0:2:0:     class=0x030000 card=0x817a1043 chip=0x27728086 rev=0x02                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82945G Integrated Graphics Controller'
    class      = display
    subclass   = VGA
    cap 05[90] = MSI supports 1 message
    cap 01[d0] = powerspec 2  supports D0 D3  current D0
pcib1@pci0:0:28:0:      class=0x060400 card=0x81791043 chip=0x27d08086 rev=0x01                                              hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
    cap 10[40] = PCI-Express 1 root port
    cap 05[80] = MSI supports 1 message
    cap 0d[90] = PCI Bridge card=0x81791043
    cap 01[a0] = powerspec 2  supports D0 D3  current D0
none0@pci0:0:29:0:      class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
none1@pci0:0:29:1:      class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
none2@pci0:0:29:2:      class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
none3@pci0:0:29:3:      class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
none4@pci0:0:29:7:      class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    cap 01[50] = powerspec 2  supports D0 D3  current D0
    cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
pcib2@pci0:0:30:0:      class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1                                              hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to                                              PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
    cap 0d[50] = PCI Bridge card=0x81791043
isab0@pci0:0:31:0:      class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface Controller                                              - 27B8'
    class      = bridge
    subclass   = PCI-ISA
    cap 09[e0] = vendor (length 12) Intel cap 1 version 0
                 features: Quick Resume, SATA RAID-5, 6 PCI-e x1 slots, SATA RAI                                             D-0/1/10, SATA AHCI
atapci0@pci0:0:31:1:    class=0x01018f card=0x81791043 chip=0x27df8086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:    class=0x01018f card=0x26011043 chip=0x27c08086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
    cap 01[70] = powerspec 2  supports D0 D3  current D0
none5@pci0:0:31:3:      class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01                                              hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
ste0@pci0:1:1:0:        class=0x020000 card=0x82131043 chip=0x020013f0 rev=0x31                                              hdr=0x00
    vendor     = 'Sundance Technology Inc'
    device     = 'FFK 8508 Encore ENL832-TX-ICNT Fast  Ethernet PCI Adapter'
    class      = network
    subclass   = ethernet
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
[root@hr1 /usr/home/savio]#

[savio]

ну так выяснил я что в фряхе сетевуха должна быть как ste

пробую подгрузить модуль, оно ругается

Код: Выделить всё

#kldload if_ste
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
kldload: can't load if_ste: File exists

пересборка мира до 6.4 или 7.1 поможет?

[paradox]

сервер на котором детектится
[root@hr1 /usr/home/savio]# uname -a
FreeBSD hr1.home 7.1-RELEASE