сетевая карта (не распозналась/не установилась)

[Turbo]

преамбула
сисадмин. я в учебных целях взял комп, который вроде поновее (на чипсете intel) сеть интегрирована в материнку. Скачал образ freeBSD 6.2 залил на болванку.

И вот что получилось: все стало очень хорошо (не заморачивался - просто умолчательная установка) но сетевую карту не видит . Как прикрутить сетевухуи заставить ее работать ?

ЗЫ EVEREST сказал
mb: MSI K(N Neo (MS-7260) micro-Star International
LAN: nVidia nForce 550 (MCP55) - Gigabit LAN Controller (PHY: Vitesse VSC8601) PCI

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Alex Keda]

Код: Выделить всё

pciconf -lv

и

Код: Выделить всё

dmesg

в студию

[manefesto]

На самом деле она должна определится сама.
Если оборудование "очень" новое, то возможно поддержки данного драйвера еще и нету, или есть но в ветке -CURRENT.
Учитесь пользоваться поиском на сайте freebsd.org
Поищите вот здесь http://www.freebsd.org/releases/6.2R/hardware.html
А вот ссылочка на -CURRENT http://www.freebsd.org/relnotes/CURRENT ... index.html

[manefesto]

Кстати MCP55 нашел только в -CURRENT 7.0, в 6.2 нету.
Возможно плохо искал

[Turbo]

хе-хе вроде еще ничего не умею а флешку уже подключил во фришке и вот результаты

pciconf -lv

Код: Выделить всё

none0@pci0:0:0:	class=0x050000 card=0x72601462 chip=0x036910de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = memory
    subclass = RAM
isab0@pci0:1:0:	class=0x060100 card=0x72601462 chip=0x036310de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-ISA
none1@pci0:1:1:	class=0x0c0500 card=0x72601462 chip=0x036810de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = SMBus
ohci0@pci0:2:0:	class=0x0c0310 card=0x72601462 chip=0x036c10de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
ehci0@pci0:2:1:	class=0x0c0320 card=0x72601462 chip=0x036d10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
atapci0@pci0:4:0:	class=0x01018a card=0x72601462 chip=0x036e10de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
atapci1@pci0:5:0:	class=0x010185 card=0x72601462 chip=0x037f10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
atapci2@pci0:5:1:	class=0x010185 card=0x72601462 chip=0x037f10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
pcib1@pci0:6:0:	class=0x060401 card=0x000000b8 chip=0x037010de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
none2@pci0:6:1:	class=0x040300 card=0x72601462 chip=0x037110de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = multimedia
none3@pci0:8:0:	class=0x068000 card=0x72601462 chip=0x037310de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
pcib2@pci0:11:0:	class=0x060400 card=0x00000040 chip=0x037410de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:12:0:	class=0x060400 card=0x00000040 chip=0x037410de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib4@pci0:13:0:	class=0x060400 card=0x00000040 chip=0x037810de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib5@pci0:14:0:	class=0x060400 card=0x00000040 chip=0x037510de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib6@pci0:15:0:	class=0x060400 card=0x00000040 chip=0x037710de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
hostb0@pci0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb1@pci0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb2@pci0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb3@pci0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
none4@pci6:0:0:	class=0x030000 card=0x01421043 chip=0x71421002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = display
    subclass = VGA
none5@pci6:0:1:	class=0x038000 card=0x01431043 chip=0x71621002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = display

dmesg

Код: Выделить всё

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2010.31-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1073545216 (1023 MB)
avail memory = 1041375232 (993 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfeaf9000-0xfeaf9fff irq 23 at device 5.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f mem 0xfeaf8000-0xfeaf8fff irq 20 at device 5.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <multimedia> at device 6.1 (no driver attached)
pci0: <bridge> at device 8.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 0.0 (no driver attached)
pci6: <display> at device 0.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2010311879 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66
ad4: 152627MB <Seagate ST3160811AS 3.AAE> at ata2-master SATA150
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 246MB (505344 512 byte sectors: 64H 32S/T 246C)
Trying to mount root from ufs:/dev/ad4s1a
umass0: at uhub1 port 2 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change,
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retries Exhausted
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retries Exhausted
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retries Exhausted
Opened disk da0 -> 6
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2010.31-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1073545216 (1023 MB)
avail memory = 1041375232 (993 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
umass0: USB Flash Disk, rev 2.00/2.00, addr 2
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfeaf9000-0xfeaf9fff irq 23 at device 5.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f mem 0xfeaf8000-0xfeaf8fff irq 20 at device 5.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci0: <multimedia> at device 6.1 (no driver attached)
pci0: <bridge> at device 8.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 0.0 (no driver attached)
pci6: <display> at device 0.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2010312019 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.23> at ata0-master UDMA66
ad4: 152627MB <Seagate ST3160811AS 3.AAE> at ata2-master SATA150
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 246MB (505344 512 byte sectors: 64H 32S/T 246C)
Trying to mount root from ufs:/dev/ad4s1a

[Turbo]

выпил пивка и подумал трезво учиться надо на оборудовании совместимом.

а потому забил на эту тачку пошел искать другую

проблему не забыл - ставить сетевухи поучусь в другой раз

[dvg_lab]

под рукой всегда должна валяться xl0 :-) у меня еще остались запасы 3C-905TX рулезная сетевушка, умели ж раньше делать! Так что если порыться то можно найти что-нить древне и совместимое.

[Alex Keda]

неа. под рукой должно было rtl8029/8139...

[manefesto]

Realtek 8139 сетевуха которая определяется в ЛЮБОЙ операционной системе.
Может она и древняя, за то то что заведется это точно.
PS: У меня Realtek 8139

[Alex Keda]

Realtek 8139 сетевуха которая определяется в ЛЮБОЙ операционной системе.
Может она и древняя, за то то что заведется это точно.
PS: У меня Realtek 8139

win95/NT4 не детектится само.

[David]

Народ не хотите поделиться ссылокой где можно драва скачать чтоб эта фигня заработала на ХР
LAN: nVidia nForce 550 (MCP55) - Gigabit LAN Controller (PHY: Vitesse VSC8601) PCI

[Turbo]

если на ХР то надо лезть на сайт производителя материнки и оттуда тянуть дрова если не распозналось.
куча всяких "дровных" сайтов в интернете. впроси у гугла, кстати "просто название сетевухи driver download", говорят помогует хотя я не пробовал... меня там наверное заблочат скоро вседа удачный поиск дают- ни разу не промазал

[paradox]

Turbo

а в спискe pciconf -lv
чет и невидно этой сетевки

[f_andrey]

проблему не забыл - ставить сетевухи поучусь в другой раз

Проблема в том что 6.2 не очень поддерживал новые на тот момент нвидиа чипсеты, поэтому чтобы жить с таким железом надо просто обновить систему до 6.3 или новее, и все наладится