сетевуха на asus m2n-mx

Проблемы установки, настройки и работы Правильной Операционной Системы

Модератор: terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Аватара пользователя
f0s
ст. лейтенант
Сообщения: 1082
Зарегистрирован: 2007-03-13 18:43:31
Откуда: Санкт-Петербург
Контактная информация:

сетевуха на asus m2n-mx

Непрочитанное сообщение f0s » 2007-03-13 18:49:27

ен видится встроенная сеть.

купили железо: asus m2n-mx + amd 3000+
мать на nforce430/geforce6100
сеть, согласно мануаду attansic gigabit lan phy

у меня стоит еще одна сеть в pci: 3com 100mbit.


по ifconfig не видно. через pciconf -lv единственное упоминание про network касается только 3com.

сеть в биосе включена. Plug and play os installed: no.

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2460 рублей (8 CPU, 8Gb RAM, 2x500Gb HDD, RAID 3ware 9750):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

abanamat
проходил мимо

Непрочитанное сообщение abanamat » 2007-03-13 19:08:34

так не поддерживается эта сетевуха. Вот в висте - да, работает ;)
ставь еще одну pci если надо - там же на маме 2 pci разъема.

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35071
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Непрочитанное сообщение Alex Keda » 2007-03-13 22:01:14

ну дал бы уж вывод
pciconf -lv
чтоль, для полноты картины...
Убей их всех! Бог потом рассортирует...

Аватара пользователя
f0s
ст. лейтенант
Сообщения: 1082
Зарегистрирован: 2007-03-13 18:43:31
Откуда: Санкт-Петербург
Контактная информация:

Непрочитанное сообщение f0s » 2007-03-14 9:18:45

Код: Выделить всё

freebsd# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.22-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 469499904 (447 MB)
avail memory = 449802240 (428 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfeff000-0xdfefffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfefec00-0xdfefecff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xdffffc00-0xdffffc7f irq 16 at device 6.0 on pci1
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:50:04:46:04:09
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.0 (no driver attached)
atapci1: <GENERIC ATA controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xdfefc000-0xdfefcfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <GENERIC ATA controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xdfef7000-0xdfef7fff irq 21 at device 8.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <display, VGA> at device 13.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1808213988 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <NEC CD-RW NR-9400A/R800> at ata0-master UDMA33
ad4: 76319MB <Seagate ST380013AS 3.18> at ata2-master UDMA33
Trying to mount root from ufs:/dev/ad4s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 1 0 0 done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1811.83-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 469499904 (447 MB)
avail memory = 449802240 (428 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
pci0: <processor> at device 1.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xdfeff000-0xdfefffff irq 21 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfefec00-0xdfefecff irq 22 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xdffffc00-0xdffffc7f irq 16 at device 6.0 on pci1
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:50:04:46:04:09
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 7.0 (no driver attached)
atapci1: <GENERIC ATA controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xdfefc000-0xdfefcfff irq 20 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <GENERIC ATA controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xdfef7000-0xdfef7fff irq 21 at device 8.1 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <display, VGA> at device 13.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1811829817 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <NEC CD-RW NR-9400A/R800> at ata0-master UDMA33
ad4: 76319MB <Seagate ST380013AS 3.18> at ata2-master UDMA33
Trying to mount root from ufs:/dev/ad4s1a

Код: Выделить всё

freebsd# pciconf -lv
none0@pci0:0:0: class=0x050000 card=0x82341043 chip=0x03ea10de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = memory
    subclass = RAM
isab0@pci0:1:0: class=0x060100 card=0x82341043 chip=0x03e010de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-ISA
none1@pci0:1:1: class=0x0c0500 card=0x82341043 chip=0x03eb10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = SMBus
none2@pci0:1:2: class=0x050000 card=0x82341043 chip=0x03f510de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = memory
    subclass = RAM
none3@pci0:1:3: class=0x0b4000 card=0x82341043 chip=0x03f410de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = processor
ohci0@pci0:2:0: class=0x0c0310 card=0x82341043 chip=0x03f110de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
ehci0@pci0:2:1: class=0x0c0320 card=0x82341043 chip=0x03f210de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
pcib1@pci0:4:0: class=0x060401 card=0x000000b8 chip=0x03f310de rev=0xa1 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
atapci0@pci0:6:0:       class=0x01018a card=0x82341043 chip=0x03ec10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
none4@pci0:7:0: class=0x068000 card=0x82341043 chip=0x03ef10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
atapci1@pci0:8:0:       class=0x010185 card=0x82341043 chip=0x03f610de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
atapci2@pci0:8:1:       class=0x010185 card=0x82341043 chip=0x03f610de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = mass storage
    subclass = ATA
pcib2@pci0:9:0: class=0x060400 card=0x00000040 chip=0x03e810de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:11:0:        class=0x060400 card=0x00000040 chip=0x03e910de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
pcib4@pci0:12:0:        class=0x060400 card=0x00000040 chip=0x03e910de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
none5@pci0:13:0:        class=0x030000 card=0x82341043 chip=0x03d010de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = display
    subclass = VGA
hostb0@pci0:24:0:       class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb1@pci0:24:1:       class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb2@pci0:24:2:       class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb3@pci0:24:3:       class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
xl0@pci1:6:0:   class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x64 hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C905B-TX Fast Etherlink 10/100 PCI TX NIC'
    class    = network
    subclass = ethernet
freebsd#

Аватара пользователя
f0s
ст. лейтенант
Сообщения: 1082
Зарегистрирован: 2007-03-13 18:43:31
Откуда: Санкт-Петербург
Контактная информация:

Непрочитанное сообщение f0s » 2007-05-21 15:14:40

как все сказочно. поменял матери на ASUS M2NPV-VM, и теперь все чудесно! разница 400р, но:

1) видится сеть встроенная
2) видится рейд при установке
3) винты определяются не как udma33, а как SATA300

=) в общем крутотень :)
named, named, what is my TTL value?..

[FidoNet 2:550/2 && 2:5030/4441]