Вот недельку назад прикрутил наконец к FreeBSD графическую оболочку KDE и теперь столкнулся с проблемой, что при работе с системой все как-то не понятно притормаживает. Хотя вроде в конктрольной панели все спецэфекты отключены.
Вот вывод top
Код: Выделить всё
last pid: 3706; load averages: 0.65, 0.74, 0.51 up 0+00:16:56 18:16:13
136 processes: 4 running, 132 sleeping
CPU states: 6.8% user, 0.0% nice, 1.4% system, 0.0% interrupt, 91.8% idle
Mem: 333M Active, 35M Inact, 83M Wired, 25M Cache, 59M Buf, 9880K Free
Swap: 3000M Total, 3584K Used, 2996M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
1755 root 1 97 0 81096K 48236K RUN 0 1:05 4.44% Xorg
1851 root 6 20 0 79488K 50768K kserel 0 0:38 0.88% amarokapp
1859 root 1 96 0 30292K 20448K select 0 0:06 0.83% kdeinit
1915 root 4 20 0 75604K 64272K kserel 0 0:39 0.00% opera
2111 root 1 96 0 6396K 3576K select 0 0:19 0.00% mc
1825 root 1 117 0 32348K 20772K RUN 0 0:06 0.00% kdeinit
2032 root 1 96 0 26528K 17528K select 0 0:05 0.00% sim
1261 squid 1 4 0 31604K 25360K kqread 0 0:04 0.00% squid
1837 root 1 96 0 32196K 22268K select 0 0:04 0.00% kdeinit
1277 root 6 20 0 8940K 4244K kserel 0 0:03 0.00% netams
1843 root 4 20 -76 11964K 6004K kserel 0 0:02 0.00% artsd
1833 root 1 96 0 27636K 17900K select 0 0:02 0.00% kdeinit
1835 root 1 96 0 29208K 19712K RUN 0 0:02 0.00% kdeinit
1544 root 1 96 0 1336K 636K select 0 0:01 0.00% moused
1117 mysql 16 20 0 38200K 23812K kserel 0 0:01 0.00% mysqld
1858 root 1 96 0 32648K 19736K select 0 0:01 0.00% kdeinit
2524 root 1 96 0 2612K 1528K CPU0 0 0:01 0.00% top
1853 root 1 96 0 26928K 17604K select 0 0:01 0.00% yakuake
1270 squid 1 4 0 4692K 4052K sbwait 0 0:01 0.00% redirector
1850 root 1 96 0 26088K 16456K select 0 0:01 0.00% kkbswitch
Код: Выделить всё
gambi /root/>dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Wed Sep 19 13:44:56 EEST 2007
root@router.gabmi.local:/usr/src/sys/i386/compile/M270707
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2405.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
Logical CPUs per core: 2
real memory = 536805376 (511 MB)
avail memory = 507314176 (483 MB)
ACPI APIC Table: <IntelR AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce FX 5700LE> mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xac00-0xac1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xa000-0xa01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xa400-0xa41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xa800-0xa81f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfc000000-0xfc0003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xfb000000-0xfb0000ff irq 19 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:80:48:2a:46:72
rl1: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem 0xfb001000-0xfb0010ff irq 22 at device 7.0 on pci2
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 00:80:48:2f:6c:a7
rl2: <RealTek 8139 10/100BaseTX> port 0x9800-0x98ff mem 0xfb002000-0xfb0020ff irq 21 at device 10.0 on pci2
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: Ethernet address: 00:80:48:2f:5d:8c
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xb400-0xb4ff,0xb800-0xb83f mem 0xfc001000-0xfc0011ff,0xfc002000-0xfc0020ff irq 17 at device 31.5 on pci0
pcm0: primary codec not ready!
pcm0: <Avance Logic ALC655 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x200 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 2000 packets/entry by default
ad0: 39205MB <Maxtor 2F040L0 VAM51JJ0> at ata0-master UDMA100
acd0: CDRW <ATAPI CDRW DRIVE 48X24/Ver L.B4> at ata1-slave UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
gambi /root/>
Но где кроется проблема, не могу разобраться сам.
Хотелось бы Вашей помоши в диагностике производительности графической подсистемы.