Трабл с установкой cacti

[GRooVE]

Доброе время суток!
Ставлю cacti из портов... Сначала ругался на какие-то модули, которые нужно обновить... Обновил... После чего "make" проходит нормально, но "make install" вылетает вот с такой штукой! Может кто сталкивался?

Код: Выделить всё

.....................
.....................
.....................
checking for FcFini... yes
checking for FREETYPE... yes
checking whether cairo's FreeType font backend feature could be enabled... yes
checking for FT_Bitmap_Size.y_ppem... yes
checking for FT_GlyphSlot_Embolden... yes
checking for FT_Load_Sfnt_Table... yes
checking for FT_Library_SetLcdFilter... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for cairo's PostScript surface backend feature...
checking whether cairo's PostScript surface backend feature could be enabled... yes
checking for gs... no
configure: WARNING: PS backend will not be tested since ghostscript is not available
checking for LIBSPECTRE... no
no
checking for cairo's PDF surface backend feature...
checking whether cairo's PDF surface backend feature could be enabled... yes
checking for POPPLER... no
no
configure: WARNING: PDF backend will not be tested since poppler >= 0.9.2 is not available
checking for cairo's SVG surface backend feature...
checking whether cairo's SVG surface backend feature could be enabled... yes
checking for LIBRSVG... no
no
configure: WARNING: SVG backend will not be tested since librsvg >= 2.15.0 is not available
checking for cairo's image surface backend feature...
checking for pixman... no
no
checking whether cairo's image surface backend feature could be enabled... no (requires pixman-1 >= 0.12.0 http://cairographics.org/releases/)
configure: error: mandatory image surface backend feature could not be enabled
===>  Script "configure" failed unexpectedly.
Please run the gnomelogalyzer, available from
"http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the
problem and suggest a solution. If - and only if - the gnomelogalyzer cannot
solve the problem, report the build failure to the FreeBSD GNOME team at
gnome@FreeBSD.org, and attach (a)
"/usr/ports/graphics/cairo/work/cairo-1.8.6/config.log", (b) the output of
the failed make command, and (c) the gnomelogalyzer output. Also, it might
be a good idea to provide an overview of all packages installed on your system
(i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1) with
the attachment. Try to avoid sending any attachments to the mailing list
(gnome@FreeBSD.org), because attachments sent to FreeBSD mailing lists are
usually discarded by the mailing list software.
*** Error code 1

Stop in /usr/ports/graphics/cairo.
*** Error code 1

Stop in /usr/ports/graphics/cairo.
*** Error code 1

Stop in /usr/ports/databases/rrdtool.
*** Error code 1

Stop in /usr/ports/databases/rrdtool.
*** Error code 1

Stop in /usr/ports/net-mgmt/cacti.

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[m0ps]

что-то мне подсказывает, что нужно тебе обновить порты и установленные библиотеки


и вообще-то по кактусу есть тема!

[GRooVE]

что-то мне подсказывает, что нужно тебе обновить порты и установленные библиотеки

Обновлял порты перед установкой cacti...
О каких библиотеках идет речь?

и вообще-то по кактусу есть тема!

Сорри, провтыкал

[m0ps]

обнови установленные порты, если для них есть обновления. также тебе подсказочка выдавалась:

Please run the gnomelogalyzer, available from
"http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the
problem and suggest a solution. If - and only if - the gnomelogalyzer cannot
solve the problem, report the build failure to the FreeBSD GNOME team at
gnome@FreeBSD.org, and attach (a) "/usr/ports/graphics/cairo/work/cairo-1.8.6/config.log", (b) the output of
the failed make command, and (c) the gnomelogalyzer output. Also, it might
be a good idea to provide an overview of all packages installed on your system
(i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1) with
the attachment. Try to avoid sending any attachments to the mailing list
(gnome@FreeBSD.org), because attachments sent to FreeBSD mailing lists are
usually discarded by the mailing list software.

[GRooVE]

Пробовал я действовать по подсказочке. Вот что получил:

Код: Выделить всё

Generating build log. Please wait... done.

The cause of your build failure is not known to gnomelogalyzer.sh.  Before
e-mailing the build log to the FreeBSD GNOME team at freebsd-gnome@FreeBSD.org,
TRY EACH OF THE FOLLOWING:

  * If you are generating your own logfile, make sure to generate it with
    something similar to:
          "make 2>&1 | tee /path/to/logfile" (sh/bash/ksh/zsh) or
          "make |& tee /path/to/logfile" (csh/tcsh)
        * Make sure your cvsup(1) configuration file specifies the 'ports-all'
          collection
        * Run cvsup(1) and attempt the build again
        * Check /usr/ports/UPDATING for information pertinent to your build
          failure
        * 99% of the commonly reported build failures can be solved by
          running "portupgrade -a"
        * Read the FAQs at http://www.FreeBSD.org/gnome/
        * Search the archives of freebsd-gnome@FreeBSD.org.  Archives can be
          searched at http://www.freebsd.org/gnome/index.html#search

If you have not performed each of the above suggestions, don't bother asking
for help.  The chances are good that you'll simply be told to perform one of
the aforementioned steps.

[m0ps]

есть ли в системе устаревшие порты?

portupgrade -a

пробовал?

[GRooVE]

Все, вопрос снят!
Большое пасибо за помощь в указании направления куда копать!
Установил с домашней странички "cairo" модуль pixman 1.40 версии от 6 февраля (в портах ее не оказалось).
Вот ссылка:

Код: Выделить всё

http://cairographics.org/releases/pixman-0.14.0.tar.gz