Запись DVD

[Lycane]

Не могу записать диск, ругается так

Код: Выделить всё

growisofs -dvd-compat -Z /dev/cd0 -J -R /home/lycane/work/DVD.iso
WARNING: /dev/cd0 already carries isofs!
About to execute 'mkisofs -J -R /home/lycane/work/DVD.iso | builtin_dd of=/dev/pass0 obs=32k seek=0'
  0.26% done, estimate finish Sun Jan 31 22:31:17 2010
  0.51% done, estimate finish Sun Jan 31 22:31:17 2010
  0.77% done, estimate finish Sun Jan 31 22:31:17 2010
:-( unable to umount /dev/cd0: Operation not permitted

В messages такое в болЬшихЪ количествахЪ

Код: Выделить всё

acd0: FAILURE - MODE_SELECT_BIG ILLEGAL REQUEST asc=0x26 ascq=0x00
acd0: WARNING - unknown CMD (0xac) read data overrun 8>0

dmesg

Код: Выделить всё

acd0: DVDR <MATSHITADVD-RAM UJ-860S/1.00> at ata0-master UDMA33
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe7:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe7:ata0:0:0:0): CAM Status: SCSI Status Error
(probe7:ata0:0:0:0): SCSI Status: Check Condition
(probe7:ata0:0:0:0): NOT READY asc:3a,0
(probe7:ata0:0:0:0): Medium not present
(probe7:ata0:0:0:0): Unretryable error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-860S 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present

Код: Выделить всё

[lycane]: sysctl hw.ata.atapi_dma
hw.ata.atapi_dma: 1

Код: Выделить всё

[lycane]: kldstat
Id Refs Address    Size     Name
14    1 0xc0edb000 4d00     atapicam.ko

Подскажите что делатЬ?

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[terminus]

k3b при записи двд исошки использует такую белеберду:

Код: Выделить всё

/usr/local/bin/growisofs -Z /dev/cd0=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1058105 -dvd-compat -speed=16 -use-the-force-luke=bufsize:32m 

кроме того у меня настроенн /dev/pass0 как просил k3b:

Код: Выделить всё

Install notice:
Notes for FreeBSD 7.x and onwards users:
1. The FreeBSD k3b port supports SCSI drives only. If you have IDE CD or DVD
   drives, use them through the cam system. See Chapter 12.5.9 of the handbook
   (http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html#ATAPICAM)
2. Your CD and DVD drives must have a mount point in /etc/fstab. They have
   to be accessed through their atapicam device if possible. I.e. the drives
   have to be adressed by e.g. /dev/cd0 instead of /dev/acd0.
3. k3b has to be started from a root console, which is not recommended.
   Alternatively do ALL of the following:
3a. set the suid flag on cdrecord and cdrdao. The 'Notes' chapter of
    'man cdrecord' discusses this.
3b. - For every user who should be able to use k3b and for every CD or DVD
      device add a directory in the users home directory. These directories
      must be owned by the corresponding user. For each such directory add a
      line in /etc/fstab (see remark 2), like:
        /dev/cd0c  /usr/home/XXX/cdrom  cd9660  ro,noauto,nosuid  0  0
      Furthermore allow user mounts as described in topic 9.22 of the FAQ:
      http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/disks.html#USER-FLOPPYMOUNT
      Every user must have read and write access to /dev/cdX:
        * add to your /etc/devfs.rules under '[system=10]':
            add path 'cd*' mode 666
          or if you prefer allow access for a group XXX only add instead:
            add path 'cd*' mode 660 group XXX
        * to enable it, add to your /etc/rc.conf a
            devfs_system_ruleset="system"
    - or just give mount and umount the suid flag, which is a security leak.
3c. Every user who should be able to use k3b must have read and write access
    to all pass through devices connected with CD and DVD drives and to the
    /dev/xpt0 device. Run 'camcontrol devlist' to identify those devices (seek
    string 'passX' at the end of each line). Note, that this is a security
    leak as well but that there is no alternative!
        * add to your /etc/devfs.rules under '[system=10]':
            add path 'pass*' mode 666
            add path 'xpt0' mode 666
          or if you prefer allow access for a group XXX only add instead:
            add path 'pass*' mode 660 group XXX
            add path 'xpt0' mode 660 group XXX
        * to enable it, add to your /etc/rc.conf a
            devfs_system_ruleset="system"
        * to apply these changes without reboot, run as root:
            /etc/rc.d/devfs restart
4. Check, that DMA is activated for atapi devices: 'sysctl hw.ata.atapi_dma'
   If not, set it to 1 and put a 'hw.ata.atapi_dma=1' into /boot/loader.conf.
5. Create a directory on a partition, which has enough disk space to hold a CDs
   or DVDs content (usually below /usr). Enter this directory in Settings->
   Configure K3b...->Misc.
6. If you experience problems while burning CDs, try to set the cdrdao driver
   manually. To do so choose Settings->Configure K3b...->Devices. Below the CD
   recorder click on the string "auto" behind "Cdrdao driver:" For most of the
   recent drives "generic-mmc" or "generic-mmc-raw" should work.
   See http://cdrdao.sourceforge.net/drives.html.

To read this instructions again, type 'make showinfo' in the k3b port directory

пишу диски под рутом.

[Lycane]

То, что просил для себя k3b - настроено...
Под рутом записЬ выглядит так

Код: Выделить всё

growisofs -dvd-compat -Z /dev/cd0 -J -R /home/lycane/work/CentOS-5.4-i386-bin-DVD.iso
WARNING: /dev/cd0 already carries isofs!
About to execute 'mkisofs -J -R /home/lycane/work/DVD.iso | builtin_dd of=/dev/pass0 obs=32k seek=0'
  0.26% done, estimate finish Sun Jan 31 23:45:01 2010
  0.51% done, estimate finish Sun Jan 31 23:45:01 2010
  0.77% done, estimate finish Sun Jan 31 23:45:01 2010
/dev/pass0: restarting DVD+RW format...
/dev/pass0: "Current Write Speed" is 4.1x1352KBps.
  1.02% done, estimate finish Sun Jan 31 23:56:24 2010
  1.28% done, estimate finish Sun Jan 31 23:58:02 2010
  1.54% done, estimate finish Sun Jan 31 23:59:07 2010
  1.79% done, estimate finish Sun Jan 31 23:59:53 2010
  2.05% done, estimate finish Mon Feb  1 00:01:17 2010
  2.30% done, estimate finish Mon Feb  1 00:01:39 2010
:-[ WRITE@LBA=7f00h failed with SK=4h/ASC=03h/ACQ=00h]: Input/output error
:-( write failed: Input/output error
/dev/pass0: flushing cache
/dev/pass0: writing lead-out

[Lycane]

Нипанятна... То ли ему диск принципиалЬно не нравился, то ли он был не рабочий.. но на другую болванку записалосЬ. Хотя ранЬше на нее не писалосЬ ничего тоже