dmesg >>
Код: Выделить всё
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE-p1 #0: Sun Oct 17 11:13:18 MSD 2010
v1lk0@backup:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2500.11-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4106895360 (3916 MB)
ACPI APIC Table: <IBM SERBLADE>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <IBM SERBLADE> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci11: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci9
pci10: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 0.3 on pci7
pci8: <ACPI PCI bus> on pcib5
isp0: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x5000-0x50ff mem 0xd6fff000-0xd6ffffff irq 25 at device 1.0 on pci8
isp0: [ITHREAD]
isp1: <Qlogic ISP 2422 PCI FC-AL Adapter> port 0x5100-0x51ff mem 0xd6ffe000-0xd6ffefff irq 26 at device 1.1 on pci8
isp1: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci16: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci12: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> mem 0xd4ffe000-0xd4ffffff at device 0.0 on pci12
pci13: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci14: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> mem 0xd4efe000-0xd4efffff at device 0.0 on pci14
pci15: <ACPI PCI bus> on pcib10
ahd0: <Adaptec 29320ALP Ultra320 SCSI adapter> port 0x6000-0x60ff,0x6100-0x61ff mem 0xd4dfe000-0xd4dfffff irq 18 at device 5.0 on pci15
ahd0: [ITHREAD]
aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib11
pcib12: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib12
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xda000000-0xdbffffff irq 17 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: 1000baseSX-FDX, auto-neg workaround, auto
bce0: Ethernet address: 00:1a:64:f3:e5:52
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.1); Flags (MSI|MFW); MFW (ipms 1.6.0)
pcib13: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib14
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem 0xd8000000-0xd9ffffff irq 19 at device 0.0 on pci6
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1: 1000baseSX-FDX, auto-neg workaround, auto
bce1: Ethernet address: 00:1a:64:f3:e5:54
bce1: [ITHREAD]
bce1: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.1); Flags (MSI)
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib15: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib15
mpt0: <LSILogic SAS/SATA Adapter> port 0x4000-0x40ff mem 0xdeffc000-0xdeffffff,0xdefe0000-0xdefeffff irq 16 at device 0.0 on pci2
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 1 Active Volume (2 Max)
mpt0: 2 Hidden Drive Members (10 Max)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x2200-0x221f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x2600-0x261f irq 23 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x2800-0x281f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf9000000-0xf90003ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib16: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib16
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xf8000000-0xf800ffff irq 22 at device 1.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2a00-0x2a0f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff,0xcc000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4720472006004720
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4720472006004720
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4720472006004720
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4720472006004720
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:1:4:0): Primary Online
(mpt0:1:1:0): Secondary Online
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
(mpt0:vol0:1): Online
(mpt0:vol0:0): Physical (mpt0:0:4:0), Pass-thru (mpt0:1:1:0)
(mpt0:vol0:0): Online
(xpt0:mpt0:1:-1:-1): rescan already queued
uhub3: 5 ports with 5 removable, self powered
ugen3.2: <vendor 0x0424> at usbus3
uhub4: <vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 2> on usbus3
uhub4: 2 ports with 2 removable, self powered
ugen0.2: <IBM> at usbus0
ukbd0: <HID KB> on usbus0
kbd2 at ukbd0
ums0: <HID MS> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
(probe1025:ahd0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1025:ahd0:0:1:0): CAM status: SCSI Status Error
(probe1025:ahd0:0:1:0): SCSI status: Check Condition
(probe1025:ahd0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) field replaceable unit: 30
(probe0:ahd0:0:1:1): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ahd0:0:1:1): CAM status: SCSI Status Error
(probe0:ahd0:0:1:1): SCSI status: Check Condition
(probe0:ahd0:0:1:1): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
sa0 at ahd0 bus 0 scbus2 target 1 lun 0
sa0: <IBM ULT3580-TD3 73P5> Removable Sequential Access SCSI-3 device
sa0: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
pass3 at mpt0 bus 1 scbus4 target 0 lun 0
pass3: <IBM-ESXS CBRBA146C3ETS0 N C331> Fixed Uninstalled SCSI-5 device
pass3: 300.000MB/s transfers
pass3: Command Queueing enabled
da0 at mpt0 bus 0 scbus3 target 0 lun 0
da0: <LSILOGIC Logical Volume 3000> Fixed Direct Access SCSI-2 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 139236MB (285156251 512 byte sectors: 255H 63S/T 17750C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
ch0 at ahd0 bus 0 scbus2 target 1 lun 1
ch0: <IBM 3573-TL 6.20> Removable Changer SCSI-5 device
ch0: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
ch0: 23 slots, 1 drive, 1 picker, 1 portal
Trying to mount root from ufs:/dev/da0s1a
Хотелось бы сделать из неё бэкап-сервер. Планируется использование Bacula.
Хотелось бы задействовать ленточки, но опыта работы с ними нет. Посоветуйте плиз статьи или другую инфу по работе с ленточными устройствами, ищу уж несколько дней...
