Kernel Panic

Простые/общие вопросы по UNIX системам. Спросите здесь, если вы новичок

Модераторы: vadim64, terminus

Правила форума
Убедительная просьба юзать теги [cоde] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
pevl
проходил мимо

Kernel Panic

Непрочитанное сообщение pevl » 2013-11-14 13:54:34

Доброго времени суток !

Проблема заключается в в произвольной перезагрузке OC

FreeBSD 9.1-Release arch amd64

Код: Выделить всё

+panic: bad pte
+cpuid = 0
+KDB: stack backtrace:
+#0 0xffffffff808c80f6 at kdb_backtrace+0x66
+#1 0xffffffff8089201e at panic+0x1ce
+#2 0xffffffff80bbdcf8 at pmap_remove_pages+0x3a8
+#3 0xffffffff80b37257 at vmspace_exit+0x157
+#4 0xffffffff8085d599 at exit1+0x379
+#5 0xffffffff8085e46e at sys_sys_exit+0xe
+#6 0xffffffff80bc57f6 at amd64_syscall+0x546
+#7 0xffffffff80bb1157 at Xfast_syscall+0xf7
+Uptime: 8d6h24m54s
P.S. Тест RAM производился , ошибок не обнаружено
Последний раз редактировалось f_andrey 2013-11-15 10:38:23, всего редактировалось 1 раз.
Причина: Автору. пожалуйста, выбирайте соответствующий раздел форума, оформляйте сообщение по человечески.

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

ChihPih
ст. прапорщик
Сообщения: 566
Зарегистрирован: 2009-09-04 12:23:30
Откуда: Где-то в России...
Контактная информация:

Re: Kernel Panic

Непрочитанное сообщение ChihPih » 2013-11-14 16:40:54

После чего появилось?
www.info-x.org - информационный ресурс о ОС FreeBSD.

Гость
проходил мимо

Re: Kernel Panic

Непрочитанное сообщение Гость » 2013-11-14 16:42:12

нвидию вытянуть и проверить без нее

ну и погуглить например
http://lists.freebsd.org/pipermail/free ... 72871.html

pevl
проходил мимо

Re: Kernel Panic

Непрочитанное сообщение pevl » 2013-11-14 16:59:21

3 месяца назад заменили железку на шлюзе
потом через 20 дней случился первый ребут , через 7 дней повторися ... 8 дней назад был последний

ChihPih
ст. прапорщик
Сообщения: 566
Зарегистрирован: 2009-09-04 12:23:30
Откуда: Где-то в России...
Контактная информация:

Re: Kernel Panic

Непрочитанное сообщение ChihPih » 2013-11-14 17:14:06

3 месяца назад заменили железку на шлюзе
Какую? Память чем тестировали? вывод dmesg бы еще сюда.
www.info-x.org - информационный ресурс о ОС FreeBSD.

pevl
проходил мимо

Re: Kernel Panic

Непрочитанное сообщение pevl » 2013-11-14 17:42:31

Код: Выделить всё

FreeBSD 9.1-RELEASE #3 r255235M: Wed Sep 11 12:40:57 EEST 2013
    root@mx.....ua:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Pentium(R) CPU G630 @ 2.70GHz (2693.94-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model = 2a  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3987562496 (3802 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  2
ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCAFE4E40/0x00000000CAFE4D40, using 32 (20110527/tbfadt-517)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4020-0x403f mem 0xe1aa0000-0xe1abffff,0xe1a80000-0xe1a9ffff irq 16 at device 0.0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: 68:05:ca:14:2a:cc
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x4000-0x401f mem 0xe1a40000-0xe1a5ffff,0xe1a20000-0xe1a3ffff irq 17 at device 0.1 on pci1
em1: Using an MSI interrupt
em1: Ethernet address: 68:05:ca:14:2a:cd
vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0xe0c00000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe1b40000-0xe1b403ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xe0a10000-0xe0a10fff,0xe0a00000-0xe0a03fff irq 16 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d4:be:d9:c5:d4:08
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe1b20000-0xe1b203ff irq 17 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA300 controller> port 0x5110-0x5117,0x5100-0x5103,0x50f0-0x50f7,0x50e0-0x50e3,0x50d0-0x50df,0x50c0-0x50cf irq 18 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel Cougar Point SATA300 controller> port 0x50b0-0x50b7,0x50a0-0x50a3,0x5090-0x5097,0x5080-0x5083,0x5070-0x507f,0x5060-0x506f irq 18 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, nat enabled, rule-based forwarding enabled, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HUA722050CLA330 JP2OA3EA> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 10523195 Hz quality 1000
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
cd0 at ata4 bus 0 scbus2 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-7270H 101A> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted
re0: link state changed to UP
vlan17: link state changed to UP