некоторые помнят мою историю с домашнем гейтвем
я его настроил всё было офигенно . пока мой брат не приехал он неудачно поставил винду н а серв для того чтобы поиграть в гта
ну поставил я фрю релиз решил ещё и ipnat попробовать и виртуал бокс начал собирать ядро и тут опа
ошибки при сборки
Код: Выделить всё
isp_pci.o(.text+0x317d): In function `isp_pci_attach':
/usr/src/sys/dev/isp/isp_pci.c:850: undefined reference to `firmware_get'
isp_pci.o(.text+0x3c40):/usr/src/sys/dev/isp/isp_pci.c:854: undefined reference to `firmware_get'
rt2661.o(.text+0x22e6): In function `rt2661_init_locked':
/usr/src/sys/dev/ral/rt2661.c:2579: undefined reference to `firmware_put'
rt2661.o(.text+0x283b):/usr/src/sys/dev/ral/rt2661.c:2539: undefined reference to `firmware_get'
rt2661.o(.text+0x2bca):/usr/src/sys/dev/ral/rt2661.c:2579: undefined reference to `firmware_put'
*** Error code 1
Stop in /usr/obj/usr/src/sys/mkir.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
катт ядра
Код: Выделить всё
#
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.531.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $
cpu HAMMER
ident mkir
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
# Use the following to compile in values accessible to the kernel
# through getenv() (or kenv(1) in userland). The format of the file
# is 'variable=value', see kenv(1)
#
# env "GENERIC.env"
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
#options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
#options KDTRACE_FRAME # Ensure frames are compiled in
#options KDTRACE_HOOKS # Kernel DTrace hooks
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
# CPU frequency control
device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahc # AHA2940 and onboard AIC7xxx devices
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
device ahd # AHA39320/29320 and onboard AIC79xx devices
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
device amd # AMD 53C974 (Tekram DC-390(T))
device hptiop # Highpoint RocketRaid 3xxx series
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
#XXX it is not 64-bit clean, -scottl
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mfi # LSI MegaRAID SAS
#device mlx # Mylex DAC960 family
#XXX pointer/int warnings
#device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device uart # Generic UART driver
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#device ae # Attansic/Atheros L2 FastEthernet
#device age # Attansic/Atheros L1 Gigabit Ethernet
#device alc # Atheros AR8131/AR8132 Ethernet
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
#device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
device an # Aironet 4500/4800 802.11 wireless NICs.
device ath # Atheros pci/cardbus NIC's
device ath_hal # pci/cardbus chip support
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
device ath_rate_sample # SampleRate tx rate control for ath
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # BSD-style compatibility pseudo ttys
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
#device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device rum # Ralink Technology RT2501USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device zyd # ZyDAS zb1211/zb1211b wireless NICs
device urio # Diamond Rio 500 MP3 player
# USB Serial devices
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
device udav # Davicom DM9601E USB
# ##########andre ########################
options IPFIREWALL # встраиваем поддержку файрволла в ядро
options IPFIREWALL_VERBOSE # вывод информации об отброшенных пакетах
options IPFIREWALL_VERBOSE_LIMIT=100 # ограничение, чтоб весь /var
# логами не засрали
options IPFIREWALL_FORWARD # включаем поддержку перенаправления
# чтобы можно было сделать
# позрачный прокси-сервер
# TCP пакетов ядром
options IPDIVERT # поддержка IP-маскарадинга
options DUMMYNET # поддержка DUMMYNET (искуственное
# ограничение пропускной способности
# сети, может быть нужно если есть
# необходимость урезать канал одним # и разжать другим компьютерам)
#options TCP_DROP_SYNFIN # Это нужно, чтобы сетевые сканеры
# не могли определять версию OS на
# сервере. Также нужно добавить в
# /etc/rc.conf строчку
# tcp_drop_synfin="YES"
options IPFIREWALL_NAT #ipfw kernel nat support
device tap
#options SC_PIXEL_MODE
options LIBALIAS
Код: Выделить всё
# $FreeBSD: src/share/examples/cvsup/stable-supfile,v 1.33.2.3.2.1 2009/10/25 01:10:29 kensmith Exp $
#
# This file contains all of the "CVSup collections" that make up the
# FreeBSD-stable source tree.
#
# CVSup (CVS Update Protocol) allows you to download the latest CVS
# tree (or any branch of development therefrom) to your system easily
# and efficiently (far more so than with sup, which CVSup is aimed
# at replacing). If you're running CVSup interactively, and are
# currently using an X display server, you should run CVSup as follows
# to keep your CVS tree up-to-date:
#
# cvsup stable-supfile
#
# If not running X, or invoking cvsup from a non-interactive script, then
# run it as follows:
#
# cvsup -g -L 2 stable-supfile
#
# You may wish to change some of the settings in this file to better
# suit your system:
#
# host=Cvsup.FreeBSD.org
# This specifies the server host which will supply the
# file updates. You must change it to one of the CVSup
# mirror sites listed in the FreeBSD Handbook at
# http://www.freebsd.org/doc/handbook/mirrors.html.
# You can override this setting on the command line
# with cvsup's "-h host" option.
#
# base=/var/db
# This specifies the root where CVSup will store information
# about the collections you have transferred to your system.
# A setting of "/var/db" will generate this information in
# /var/db/sup. You can override the "base" setting on the
# command line with cvsup's "-b base" option. This directory
# must exist in order to run CVSup.
#
# prefix=/usr
# This specifies where to place the requested files. A
# setting of "/usr" will place all of the files requested
# in "/usr/src" (e.g., "/usr/src/bin", "/usr/src/lib").
# The prefix directory must exist in order to run CVSup.
#
###############################################################################
#
# DANGER! WARNING! LOOK OUT! VORSICHT!
#
# If you add any of the ports or doc collections to this file, be sure to
# specify them with a "tag" value set to ".", like this:
#
# ports-all tag=.
# doc-all tag=.
#
# If you leave out the "tag=." portion, CVSup will delete all of
# the files in your ports or doc tree. That is because the ports and doc
# collections do not use the same tags as the main part of the FreeBSD
# source tree.
#
###############################################################################
# Defaults that apply to all the collections
#
# IMPORTANT: Change the next line to use one of the CVSup mirror sites
# listed at http://www.freebsd.org/doc/handbook/mirrors.html.
*default host=cvsup.FreeBSD.org
*default base=/var/db
*default prefix=/usr
# The following line is for 8-stable. If you want 7-stable, 6-stable,
# 5-stable, 4-stable, 3-stable, or 2.2-stable, change to "RELENG_7",
# "RELENG_6", "RELENG_5", "RELENG_4", "RELENG_3", or "RELENG_2_2"
# respectively.
*default release=cvs tag=RELENG_8
*default delete use-rel-suffix
# If you seem to be limited by CPU rather than network or disk bandwidth, try
# commenting out the following line. (Normally, today's CPUs are fast enough
# that you want to run compression.)
*default compress
## Main Source Tree.
#
# The easiest way to get the main source tree is to use the "src-all"
# mega-collection. It includes all of the individual "src-*" collections.
# Please note: If you want to track -STABLE, leave this uncommented.
src-all
# These are the individual collections that make up "src-all". If you
# use these, be sure to comment out "src-all" above.
#src-base
#src-bin
#src-cddl
#src-contrib
#src-etc
#src-games
#src-gnu
#src-include
#src-kerberos5
#src-kerberosIV
#src-lib
#src-libexec
#src-release
#src-rescue
#src-sbin
#src-share
#src-sys
#src-tools
#src-usrbin
#src-usrsbin
# These are the individual collections that make up FreeBSD's crypto
# collection. They are no longer export-restricted and are a part of
# src-all
#src-crypto
#src-eBones
#src-secure
#src-sys-crypto
Код: Выделить всё
make ckean %% shutdown now
mount /
cd /usr/src
mergemaster -p
make buildworkdсбрался уведомил и...
Код: Выделить всё
make installworldпишу
Код: Выделить всё
mergemaster -FUа нород хочет серв
сорри за ошибки писал поздно
и что я сделал не так?
