ноут samsung p28 (NP28PRKY03/SER)
FreeBSD 9.0-STABLE i386
pciconf -lv:
Код: Выделить всё
hostb0@pci0:0:0:0: class=0x060000 card=0xb028144d chip=0x58311002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS300 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x58381002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'Radeon 9100 IGP AGP Bridge'
class = bridge
subclass = PCI-PCI
none0@pci0:0:20:0: class=0x0c0500 card=0xb028144d chip=0x43531002 rev=0x1a hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SMBus'
class = serial bus
subclass = SMBus
atapci0@pci0:0:20:1: class=0x01018a card=0xb028144d chip=0x43491002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Dual Channel Bus Master PCI IDE Controller'
class = mass storage
subclass = ATA
isab0@pci0:0:20:3: class=0x060100 card=0xb028144d chip=0x434c1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = bridge
subclass = PCI-ISA
pcib2@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43421002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'IXP200 3COM 3C920B Ethernet Controller'
class = bridge
subclass = PCI-PCI
pcm0@pci0:0:20:5: class=0x040100 card=0xb028144d chip=0x43411002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP150 AC'97 Audio Controller'
class = multimedia
subclass = audio
vgapci0@pci0:1:5:0: class=0x030000 card=0x6102144d chip=0x58351002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS300M AGP [Radeon Mobility 9100IGP]'
class = display
subclass = VGA
cbb0@pci0:2:4:0: class=0x060700 card=0xb028144d chip=0x04751180 rev=0xb8 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c475'
class = bridge
subclass = PCI-CardBus
none1@pci0:2:4:1: class=0x0c0010 card=0xb023144d chip=0x05511180 rev=0x00 hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'R5C551 IEEE 1394 Controller'
class = serial bus
subclass = FireWire
bfe0@pci0:2:5:0: class=0x020000 card=0xb028144d chip=0x170c14e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4401-B0 100Base-TX'
class = network
subclass = ethernet
ohci0@pci0:2:6:0: class=0x0c0310 card=0xb028144d chip=0x00351033 rev=0x43 hdr=0x00
vendor = 'NEC Corporation'
device = 'USB'
class = serial bus
subclass = USB
ohci1@pci0:2:6:1: class=0x0c0310 card=0xb028144d chip=0x00351033 rev=0x43 hdr=0x00
vendor = 'NEC Corporation'
device = 'USB'
class = serial bus
subclass = USB
ehci0@pci0:2:6:2: class=0x0c0320 card=0xb028144d chip=0x00e01033 rev=0x04 hdr=0x00
vendor = 'NEC Corporation'
device = 'USB 2.0'
class = serial bus
subclass = USBКод: Выделить всё
mptable_probe: MP Config Table has bad signature: Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #0: Fri Jan 20 09:20:44 MSK 2012
root@hp.tbnbykovo.ru:/usr/obj/usr/src/sys/HP-0112_05 i386
CPU: Intel(R) Celeron(R) M processor 1.30GHz (1300.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Family = 6 Model = d Stepping = 6
Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 805306368 (768 MB)
avail memory = 706920448 (674 MB)
kbd1 at kbdmux0
ACPI Warning: Invalid length for PmTimerBlock: 24, using default 32 (20110527/tbfadt-638)
acpi0: <SEC > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 2bf00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800a on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: For \\_SB_.PCI0.LPC0.H_EC._GLK: Parameter count mismatch - ASL declared 1, ACPI requires 0 (20110527/nspredef-387)
acpi_ec0: <Embedded Controller: GPE 0x6, GLK> port 0x62,0x66 on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <ATI RS300_133 AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xe0000000-0xe7ffffff,0xd8100000-0xd810ffff irq 10 at device 5.0 on pci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP200 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8070-0x807f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci_link2: BIOS IRQ 11 for 2.5.INTA is invalid
pci_link2: BIOS IRQ 11 for 2.6.INTB is invalid
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C475 PCI-CardBus Bridge> at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <serial bus, FireWire> at device 4.1 (no driver attached)
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xd8204000-0xd8205fff irq 9 at device 5.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100 media interface> PHY 1 on miibus0
bmtphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:00:f0:78:9b:4e
ohci0: <NEC uPD 9210 USB controller> mem 0xd8201000-0xd8201fff irq 9 at device 6.0 on pci2
usbus0: <NEC uPD 9210 USB controller> on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0xd8202000-0xd8202fff irq 9 at device 6.1 on pci2
usbus1: <NEC uPD 9210 USB controller> on ohci1
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xd8200800-0xd82008ff irq 5 at device 6.2 on pci2
usbus2: EHCI version 1.0
usbus2: <NEC uPD 720100 USB 2.0 controller> on ehci0
pcm0: <ATI IXP 200> mem 0xd8004400-0xd80044ff irq 5 at device 20.5 on pci0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff,0xd4000-0xd4fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounters tick every 1.000 msec
pcm0: <Analog Devices AD1981B AC97 Codec>
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <NEC> at usbus0
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <NEC> at usbus1
uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <NEC> at usbus2
uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600BEVE-00A0HT0 11.01A11> ATA-8 device
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
Timecounter "TSC" frequency 1300073228 Hz quality 800
uhub0: 3 ports with 3 removable, self powered
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDW/DVD TS-L462C SC00> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)Код: Выделить всё
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/lib/X11/fonts/misc/"
FontPath "/usr/local/lib/X11/fonts/winfonts/"
FontPath "/usr/local/lib/X11/fonts/TTF/"
FontPath "/usr/local/lib/X11/fonts/URW/"
FontPath "/usr/local/lib/X11/fonts/OTF"
FontPath "/usr/local/lib/X11/fonts/Type1/"
FontPath "/usr/local/lib/X11/fonts/100dpi/"
FontPath "/usr/local/lib/X11/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
Load "dri"
Load "dri2"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:caps_toggle,grp_led:caps"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "Advanced Micro Devices [AMD] nee ATI"
BoardName "RS300M AGP [Radeon Mobility 9100IGP]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionПробовал driver radeon - то же самое. (дрова их портов - xorg-drivers).
C vesa все работает нормально. Вот, только, оно, как бы, нафиг не нужно.
Окна xfce4, но с айтишными дровами даже голые иксы при старте приводят к зависанию.
На других версиях фряхи я не пробовал этот ноут... Может в 9-ке недопилено еще что-нить по сабжу? Или я недосмотрел где?
Заранее спасибо за советы.
