Код: Выделить всё
uname -a
FreeBSD dhcppc1 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Код: Выделить всё
dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
CPU: VIA Nehemiah (800.33-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x698 Family = 6 Model = 9 Stepping = 8
Features=0x381b03f<FPU,VME,DE,PSE,TSC,MSR,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE>
VIA Padlock Features=0xdd<RNG,AES>
real memory = 268435456 (256 MB)
avail memory = 103788544 (98 MB)
kbd1 at kbdmux0
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 76f0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 4 range: f300 vs f2fe
pci_link0: BIOS IRQ 15 for 0.16.INTA is invalid
pci_link1: BIOS IRQ 5 for 0.16.INTB is invalid
pci_link0: BIOS IRQ 15 for 0.18.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 862x (CLE266) host to PCI bridge> on hostb0
agp0: aperture size is 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xe8000000-0xebffffff,0xec000000-0xecffffff irq 11 at device 0.0 on pci1
uhci0: <VIA 83C572 USB controller> port 0xea00-0xea1f irq 11 at device 16.0 on pci0
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xeb00-0xeb1f irq 12 at device 16.1 on pci0
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device 16.2 on pci0
usbus2: <VIA 83C572 USB controller> on uhci2
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xee000000-0xee0000ff irq 12 at device 16.3 on pci0
usbus3: EHCI version 1.0
usbus3: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe900-0xe90f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 11 at device 17.5 on pci0
pcm0: <VIA Technologies VIA1612A AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xee001000-0xee0010ff irq 11 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x74
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:e0:c5:57:91:24
acpi_tz0: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_throttle0: <ACPI CPU Throttling> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Timecounter "TSC" frequency 800332902 Hz quality 800
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.2: <JetFlash> at usbus3
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <JetFlash Transcend 8GB 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7788MB (15950592 512 byte sectors: 255H 63S/T 992C)
ugen3.3: <Ralink> at usbus3
Root mount waiting for: usbus3
Trying to mount root from ufs:/dev/da0s1a [rw]...
ugen2.2: <SIGMACH1P> at usbus2
ukbd0: <SIGMACH1P USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
kbd2 at ukbd0
uhid0: <SIGMACH1P USB Keykoard, class 0/0, rev 1.10/1.10, addr 2> on usbus2
Код: Выделить всё
ifconfig
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82808<VLAN_MTU,WOL_UCAST,WOL_MAGIC,LINKSTATE>
ether 00:e0:c5:57:91:24
inet 192.168.1.3 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Поискав я понял, поддержки устройств на этом чипе в freebsd нету. На официальном сайте драйвера только для linux http://www.ralinktech.com/en/04_support ... php?sn=501. (В Russian Fedora Remix 17 у меня подхватился сразу) Что можно попробовать сделать? Планировалось с этой штукой сделать точку доступа.ugen3.3: <Ralink> at usbus3
Заранее спасибо.
