wbinfo

[uvetrom]

Доброго времени суток, уважаемый участники форума!
Подскажи пжл, настраивал сервер по статье http://www.lissyara.su/articles/freebsd ... ejik-ntlm/
Установил самбу, поправил конфиги, настроил керберос, подключил к домену
Проблема в чем:

Код: Выделить всё

BSD-gate# wbinfo -g
BSD-gate# wbinfo -u

Не выводит инфу о пользователях и группах, но при этом

Код: Выделить всё

BSD-gate# wbinfo -i ldapuser
ldapuser:*:10003:10005:ldapuser:/home/domain/ldapuser:/bin/false
BSD-gate# wbinfo -i administrator
administrator:*:10000:10005:Administrator:/home/domain/administrator:/bin/false
BSD-gate# wbinfo -i backup
backup:*:10004:10005:Backup:/home/domain/backup:/bin/false

з.ы. Часть пользователей у меня в домене с русскими именами, а часть с английскими, домен 2003.

Код: Выделить всё

BSD-gate# uname -a
FreeBSD BSD-gate.domain.local 8.2-RC2 FreeBSD 8.2-RC2 #0: Wed Jan 12 17:26:33 UTC 2011     root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Гость]

смотрите все ли демоны запущены

Код: Выделить всё

ps ax

[uvetrom]

Код: Выделить всё

BSD-gate# ps ax
  PID  TT  STAT      TIME COMMAND
    0  ??  DLs    0:00.02 [kernel]
    1  ??  ILs    0:00.12 /sbin/init --
    2  ??  DL     0:00.45 [g_event]
    3  ??  DL     0:02.04 [g_up]
    4  ??  DL     0:01.23 [g_down]
    5  ??  DL     0:00.04 [fdc0]
    6  ??  DL     0:00.00 [sctp_iterator]
    7  ??  DL     0:00.00 [xpt_thrd]
    8  ??  DL     0:00.22 [pagedaemon]
    9  ??  DL     0:00.00 [vmdaemon]
   10  ??  DL     0:00.00 [audit]
   11  ??  RL    57:25.09 [idle]
   12  ??  WL     0:09.42 [intr]
   13  ??  DL     0:00.40 [yarrow]
   14  ??  DL     0:00.15 [usb]
   15  ??  DL     0:00.00 [pagezero]
   16  ??  DL     0:00.30 [bufdaemon]
   17  ??  DL     0:00.09 [vnlru]
   18  ??  DL     0:01.35 [syncer]
   19  ??  DL     0:00.23 [softdepflush]
   20  ??  DL     0:00.01 [flowcleaner]
  497  ??  Ss     0:00.00 /sbin/devd
  633  ??  Ss     0:00.05 /usr/sbin/syslogd -s
  928  ??  Is     0:00.00 /usr/local/sbin/squid -D
  930  ??  S      0:00.82 (squid) -D (squid)
  940  ??  I      0:00.00 (dnsserver) (dnsserver)
  942  ??  I      0:00.00 (dnsserver) (dnsserver)
  943  ??  I      0:00.00 (dnsserver) (dnsserver)
  944  ??  I      0:00.00 (dnsserver) (dnsserver)
  945  ??  I      0:00.00 (dnsserver) (dnsserver)
  946  ??  I      0:00.03 (ntlm_auth) --helper-protocol=squid-2.5-ntlmssp (ntlm
  949  ??  Is     0:00.02 /bin/sh /usr/local/bin/mysqld_safe --defaults-extra-f
  951  ??  I      0:00.03 (ntlm_auth) --helper-protocol=squid-2.5-ntlmssp (ntlm
  952  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-ntlmssp (ntlm
  953  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-ntlmssp (ntlm
  954  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-ntlmssp (ntlm
  955  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-basic (ntlm_a
  956  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-basic (ntlm_a
  957  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-basic (ntlm_a
  960  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-basic (ntlm_a
  961  ??  I      0:00.02 (ntlm_auth) --helper-protocol=squid-2.5-basic (ntlm_a
  996  ??  I      0:00.00 (unlinkd) (unlinkd)
 1008  ??  S      0:16.40 /usr/local/libexec/mysqld --defaults-extra-file=/var/
 1033  ??  Ss     0:00.87 /usr/local/sbin/httpd -DNOHTTPACCEPT
 1062  ??  Ss     0:00.01 /usr/sbin/sshd
 1070  ??  Ss     0:00.17 sendmail: accepting connections (sendmail)
 1074  ??  Is     0:00.01 sendmail: Queue runner@00:30:00 for /var/spool/client
 1081  ??  Is     0:00.04 /usr/sbin/cron -s
 1161  ??  I      0:00.01 /usr/local/sbin/httpd -DNOHTTPACCEPT
 1162  ??  I      0:00.01 /usr/local/sbin/httpd -DNOHTTPACCEPT
 1163  ??  I      0:00.01 /usr/local/sbin/httpd -DNOHTTPACCEPT
 1164  ??  I      0:00.01 /usr/local/sbin/httpd -DNOHTTPACCEPT
 1165  ??  I      0:00.01 /usr/local/sbin/httpd -DNOHTTPACCEPT
34467  ??  Ss     0:00.32 /usr/local/sbin/nmbd -D -s /usr/local/etc/smb.conf
34471  ??  Is     0:00.08 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf
34475  ??  Ss     0:00.14 /usr/local/sbin/winbindd -s /usr/local/etc/smb.conf
34476  ??  I      0:00.14 /usr/local/sbin/winbindd -s /usr/local/etc/smb.conf
34477  ??  I      0:00.05 /usr/local/sbin/winbindd -s /usr/local/etc/smb.conf
34478  ??  I      0:00.00 /usr/local/sbin/winbindd -s /usr/local/etc/smb.conf
34479  ??  I      0:00.00 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf
34483  ??  I      0:00.01 /usr/local/sbin/winbindd -s /usr/local/etc/smb.conf
34567  ??  Ss     0:00.12 sshd: root@pts/0 (sshd)
 1016  v0- S      0:02.79 /usr/local/bin/samsdaemon
 1153  v0  Is+    0:00.01 /usr/libexec/getty Pc ttyv0
 1154  v1  Is+    0:00.01 /usr/libexec/getty Pc ttyv1
 1155  v2  Is+    0:00.01 /usr/libexec/getty Pc ttyv2
 1156  v3  Is+    0:00.01 /usr/libexec/getty Pc ttyv3
 1157  v4  Is+    0:00.01 /usr/libexec/getty Pc ttyv4
 1158  v5  Is+    0:00.01 /usr/libexec/getty Pc ttyv5
 1159  v6  Is+    0:00.01 /usr/libexec/getty Pc ttyv6
 1160  v7  Is+    0:00.01 /usr/libexec/getty Pc ttyv7
34571   0  Rs     0:00.04 -csh (csh)
34575   0  R+     0:00.00 ps ax

[sudo]

Код: Выделить всё

cat /etc/nsswitch.conf

в студию и еще

Код: Выделить всё

nmbd -V

[uvetrom]

Код: Выделить всё

BSD-gate# cat /etc/nsswitch.conf
# nsswitch.conf(5) - name service switch configuration file
# $FreeBSD: src/etc/nsswitch.conf,v 1.1.10.1.6.1 2010/12/21 17:09:25 kensmith Exp $
#
group: files winbind
group_compat: nis
hosts: files dns
networks: files
passwd: files winbind
passwd_compat: nis
shells: files
BSD-gate#

Код: Выделить всё

BSD-gate# nmbd -V
Version 3.5.6

[uvetrom]

up

[Гость]

http://www.opennet.ru/openforum/vsluhfo ... 88932.html
может поможет?
кстати smb.conf закинте заодно

[uvetrom]

Код: Выделить всё

#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
   workgroup = domain
# server string is the equivalent of the NT Description field
   server string = Squid Server
# Security mode. Defines in which mode Samba will operate. Possible 
# values are share, user, server, domain and ads. Most people will want 
# user level security. See the Samba-HOWTO-Collection for details.
   security = ADS

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
   hosts allow = 172.17.32. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#  password server = *
   password server = luna.domain.local

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
   realm = domain.local

# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
;   passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /usr/local/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See the chapter 'Samba performance issues' in the Samba HOWTO Collection
# and the manual pages for details.
# You may want to add the following on a Linux system:
;   socket options = SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
   domain master = no 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
   dns proxy = no 

# Charset settings
   display charset = koi8-r
   unix charset = koi8-r
   dos charset = cp866

# Use extended attributes to store file modes
;    store dos attributes = yes
;    map hidden = no
;    map system = no
;    map archive = no

# Use inherited ACLs for directories
;    nt acl support = yes
;    inherit acls = yes
;    map acl inherit = yes 

# These scripts are used on a domain controller or stand-alone 
# machine to add or delete corresponding unix accounts
;  add user script = /usr/sbin/useradd %u
;  add group script = /usr/sbin/groupadd %g
;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
;  delete user script = /usr/sbin/userdel %u
;  delete user from group script = /usr/sbin/deluser %u %g
;  delete group script = /usr/sbin/groupdel %g

winbind separator = +
winbind use default domain = yes
winbind uid = 10000-15000
winbind gid = 10000-15000
winbind enum users = yes
winbind enum groups = yes

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765
;

# This is a DRAFT sample configuration for the ACLs on the ZFS partition.
#
;    nt acl support = yes
;    inherit acls = no
;    map acl inherit = yes
;
;[zpool]
;    path = /tank/zpool
;    unix extensions = no
;    vfs objects = zfsacl
;    nfs4:mode = special
;    nfs4:acedup = merge
;    nfs4:chown = yes

[uvetrom]

Я может, глупость спрошу

Код: Выделить всё

BSD-gate#  wbinfo -a user%password
plaintext password authentication failed
Could not authenticate user user%password with plaintext password
challenge/response password authentication failed
error code was NT_STATUS_NO_SUCH_USER (0xc0000064)
error messsage was: No such user
Could not authenticate user user with challenge/response
BSD-gate#

Такая команда действительно есть, или же надо подставить свой домен и реальные имена пользователей?
С реальными кстати такая же проблема.
Мб в этом где то загвоздка?

[uvetrom]

Попробовал все сделать с нуля, проблема та же самая группы и пользователи не видно, но можно получить id пользователей и авторизоваться под пользователем

Код: Выделить всё

sams# wbinfo -u
sams# wbinfo -g

Код: Выделить всё

sams# id administrator
uid=10000(administrator) gid=10020 groups=10020
sams# id qwe
uid=10001(qwe) gid=10020 groups=10020
sams# id abakumovaml
uid=10002(abakumovaml) gid=10020 groups=10020

Код: Выделить всё

sams# wbinfo -a administrator
Enter administrator's password:
plaintext password authentication succeeded
Enter administrator's password:
challenge/response password authentication succeeded

Может у кого то есть идеи куда копать то?

[snorlov]

Может я фигню спрошу, но все же, а как у вас самба скомпилирована, кроме поддержки AD, есть поддержка Ldap'a? Если нет, попробуйте с ней сомпилировать...

[uvetrom]

Да, с лдапом сделано.

Ldap, ads,winbind, syslog, utmp, popt. Разница со статьей и с моими настройками только в том, что я PCH не поставил, т.к. в самбе 3.5 его нет, или как то по другому называется.