пытаюсь на компе запустить X.
установил из портов.
запускаю Xorg -confugure, затем X -config /root/xorg.conf.new
сетки нет, черный экран, ошибок в var/log/xorg.0.log нет (или не вижу)
от безысходности вписал MODES. при запуске экран моргает, все остальное тоже самое.
что делать?
dmesg:
Код: Выделить всё
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1800.01-MHz 686-class CPU)
Origin="GenuineIntel" Id=0x10661 Family=0x6 Model=0x16 Stepping=1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 536870912 (512 MB)
avail memory = 490016768 (467 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <AAMMII OEMAPIC >
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0fcc580, 0) error 19
acpi0: <AAMMII OEMRSDTA> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfea80000-0xfeafffff,0xd0000000-0xdfffffff,0xfea40000-0xfea7ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci0: Boot video device
hdac0: <Intel 82801G HDA Controller> mem 0xfea38000-0xfea3bfff irq 16 at device 27.0 on pci0
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfea37c00-0xfea37fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:19:21:3e:49:97
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcb000-0xcbfff pnpid ORM0000 on isa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
hdacc0: <Sigmatel STAC9221_A2 HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9221_A2 Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9221_A2 (Analog 5.1+HP/2.0)> at nid 13,12,15,10 and 11,21 on hdaa0
pcm1: <Sigmatel STAC9221_A2 (Rear Digital)> at nid 16 on hdaa0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD800AAJS-00B4A0 01.03A01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WCAT20144128
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors)
ada0: Previously was known as ad4
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-5200A 1.04> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC" frequency 1800013554 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen1.2: <Logitech> at usbus1
rl0: link state changed to DOWN
rl0: link state changed to UP
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel i945G> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xdb
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xdb
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xdb
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xdb
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xdb
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xdb
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xdb
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] failed to find VBIOS tables
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] initialized overlay support
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
Код: Выделить всё
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/local/share/fonts/misc/"
FontPath "/usr/local/share/fonts/TTF/"
FontPath "/usr/local/share/fonts/OTF/"
FontPath "/usr/local/share/fonts/Type1/"
FontPath "/usr/local/share/fonts/100dpi/"
FontPath "/usr/local/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Код: Выделить всё
[ 7005.384]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 7005.385] X Protocol Version 11, Revision 0
[ 7005.385] Build Operating System: FreeBSD 10.3-RELEASE i386
[ 7005.385] Current Operating System: FreeBSD Free 10.3-RELEASE FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
[ 7005.385] Build Date: 25 June 2016 07:15:27AM
[ 7005.385]
[ 7005.385] Current version of pixman: 0.34.0
[ 7005.385] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7005.385] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7005.385] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 30 02:46:06 2016
[ 7005.385] (++) Using config file: "/root/xorg.conf.new"
[ 7005.386] (==) ServerLayout "X.org Configured"
[ 7005.386] (**) |-->Screen "Screen0" (0)
[ 7005.386] (**) | |-->Monitor "Monitor0"
[ 7005.386] (**) | |-->Device "Card0"
[ 7005.386] (**) |-->Input Device "Mouse0"
[ 7005.386] (**) |-->Input Device "Keyboard0"
[ 7005.386] (==) Automatically adding devices
[ 7005.386] (==) Automatically enabling devices
[ 7005.386] (==) Not automatically adding GPU devices
[ 7005.386] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 7005.386] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 7005.386] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 7005.386] (WW) Disabling Mouse0
[ 7005.386] (WW) Disabling Keyboard0
[ 7005.386] (II) Loader magic: 0x8232070
[ 7005.386] (II) Module ABI versions:
[ 7005.386] X.Org ANSI C Emulation: 0.4
[ 7005.386] X.Org Video Driver: 19.0
[ 7005.386] X.Org XInput driver : 21.0
[ 7005.386] X.Org Server Extension : 9.0
[ 7005.387] (--) PCI:*(0:0:2:0) 8086:2772:1019:2633 rev 2, Mem @ 0xfea80000/524288, 0xd0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8, BIOS @ 0x????????/65536
[ 7005.387] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 7005.387] (II) LoadModule: "glx"
[ 7005.387] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 7005.389] (II) Module glx: vendor="X.Org Foundation"
[ 7005.390] compiled for 1.17.4, module version = 1.0.0
[ 7005.390] ABI class: X.Org Server Extension, version 9.0
[ 7005.390] (==) AIGLX enabled
[ 7005.390] (II) LoadModule: "intel"
[ 7005.390] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 7005.390] (II) Module intel: vendor="X.Org Foundation"
[ 7005.390] compiled for 1.17.4, module version = 2.21.15
[ 7005.390] Module class: X.Org Video Driver
[ 7005.390] ABI class: X.Org Video Driver, version 19.0
[ 7005.390] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 7005.391] (--) Using syscons driver with X support (version 2.0)
[ 7005.391] (--) using VT number 9
[ 7005.405] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 7005.406] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7005.406] (==) intel(0): RGB weight 888
[ 7005.406] (==) intel(0): Default visual is TrueColor
[ 7005.406] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[ 7005.406] (**) intel(0): Relaxed fencing disabled
[ 7005.407] (**) intel(0): Wait on SwapBuffers? enabled
[ 7005.407] (**) intel(0): Triple buffering? enabled
[ 7005.407] (**) intel(0): Framebuffer tiled
[ 7005.407] (**) intel(0): Pixmaps tiled
[ 7005.407] (**) intel(0): 3D buffers tiled
[ 7005.407] (**) intel(0): SwapBuffers wait enabled
[ 7005.407] (==) intel(0): video overlay key set to 0x101fe
[ 7005.451] (II) intel(0): Output VGA1 using monitor section Monitor0
[ 7005.486] (II) intel(0): EDID for output VGA1
[ 7005.486] (II) intel(0): Manufacturer: ACR Model: ad46 Serial#: 2171671030
[ 7005.486] (II) intel(0): Year: 2008 Week: 17
[ 7005.486] (II) intel(0): EDID Version: 1.3
[ 7005.486] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 7005.487] (II) intel(0): Sync: Separate
[ 7005.487] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 7005.487] (II) intel(0): Gamma: 2.20
[ 7005.487] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 7005.487] (II) intel(0): First detailed timing is preferred mode
[ 7005.487] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617
[ 7005.488] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329
[ 7005.488] (II) intel(0): Supported established timings:
[ 7005.488] (II) intel(0): 720x400@70Hz
[ 7005.488] (II) intel(0): 640x480@60Hz
[ 7005.488] (II) intel(0): 640x480@67Hz
[ 7005.488] (II) intel(0): 640x480@72Hz
[ 7005.488] (II) intel(0): 640x480@75Hz
[ 7005.488] (II) intel(0): 800x600@56Hz
[ 7005.488] (II) intel(0): 800x600@60Hz
[ 7005.489] (II) intel(0): 800x600@72Hz
[ 7005.489] (II) intel(0): 800x600@75Hz
[ 7005.489] (II) intel(0): 832x624@75Hz
[ 7005.489] (II) intel(0): 1024x768@60Hz
[ 7005.489] (II) intel(0): 1024x768@70Hz
[ 7005.489] (II) intel(0): 1024x768@75Hz
[ 7005.489] (II) intel(0): 1280x1024@75Hz
[ 7005.489] (II) intel(0): Manufacturer's mask: 0
[ 7005.489] (II) intel(0): Supported detailed timing:
[ 7005.490] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 7005.490] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 7005.490] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 7005.490] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 7005.490] (II) intel(0): Serial No: L460C260404D
[ 7005.490] (II) intel(0): Monitor name: AL1716
[ 7005.490] (II) intel(0): EDID (in hex):
[ 7005.491] (II) intel(0): 00ffffffffffff00047246adf6117181
[ 7005.491] (II) intel(0): 1112010308221b78eadc55a359489e24
[ 7005.491] (II) intel(0): 115054bfef0001010101010101010101
[ 7005.491] (II) intel(0): 010101010101302a009851002a403070
[ 7005.491] (II) intel(0): 1300520e1100001e000000fd00384b1e
[ 7005.491] (II) intel(0): 530e000a202020202020000000ff004c
[ 7005.491] (II) intel(0): 34363043323630343034440a000000fc
[ 7005.491] (II) intel(0): 00414c313731360a20202020202000ac
[ 7005.491] (II) intel(0): Printing probed modes for output VGA1
[ 7005.492] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz UeP)
[ 7005.492] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 7005.492] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7005.492] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7005.492] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7005.492] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7005.492] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7005.493] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7005.493] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7005.493] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7005.493] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7005.493] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 7005.493] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7005.494] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7005.494] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7005.494] (II) intel(0): Output VGA1 connected
[ 7005.494] (II) intel(0): Using user preference for initial modes
[ 7005.494] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 7005.494] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7005.494] (II) intel(0): Kernel page flipping support detected, enabling
[ 7005.495] (==) intel(0): DPI set to (96, 96)
[ 7005.495] (II) Loading sub module "fb"
[ 7005.495] (II) LoadModule: "fb"
[ 7005.495] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 7005.496] (II) Module fb: vendor="X.Org Foundation"
[ 7005.496] compiled for 1.17.4, module version = 1.0.0
[ 7005.496] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7005.496] (II) Loading sub module "dri2"
[ 7005.496] (II) LoadModule: "dri2"
[ 7005.496] (II) Module "dri2" already built-in
[ 7005.497] (==) Depth 24 pixmap format is 32 bpp
[ 7005.497] (II) intel(0): [DRI2] Setup complete
[ 7005.497] (II) intel(0): [DRI2] DRI driver: i915
[ 7005.497] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 7005.497] (II) UXA(0): Driver registered support for the following operations:
[ 7005.497] (II) solid
[ 7005.498] (II) copy
[ 7005.498] (II) composite (RENDER acceleration)
[ 7005.498] (II) put_image
[ 7005.498] (II) get_image
[ 7005.498] (==) intel(0): Backing store enabled
[ 7005.498] (==) intel(0): Silken mouse enabled
[ 7005.498] (II) intel(0): Initializing HW Cursor
[ 7005.498] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7005.499] (==) intel(0): DPMS enabled
[ 7005.499] (==) intel(0): Intel XvMC decoder disabled
[ 7005.499] (II) intel(0): Set up textured video
[ 7005.499] (II) intel(0): Set up overlay video
[ 7005.499] (II) intel(0): direct rendering: DRI2 Enabled
[ 7005.582] (--) RandR disabled
[ 7005.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7005.589] (II) AIGLX: enabled GLX_ARB_create_context
[ 7005.589] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7005.589] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7005.589] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7005.590] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7005.590] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7005.590] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7005.590] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7005.590] (II) AIGLX: Loaded and initialized i915
[ 7005.590] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7005.591] (II) intel(0): Setting screen physical size to 270 x 203
[ 7005.877] (II) config/devd: probing input devices...
[ 7005.877] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 7005.878] (II) LoadModule: "kbd"
[ 7005.878] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 7005.878] (II) Module kbd: vendor="X.Org Foundation"
[ 7005.879] compiled for 1.17.4, module version = 1.8.1
[ 7005.879] Module class: X.Org XInput Driver
[ 7005.879] ABI class: X.Org XInput driver, version 21.0
[ 7005.879] (II) Using input driver 'kbd' for 'kbdmux'
[ 7005.879] (**) kbdmux: always reports core events
[ 7005.879] (**) kbdmux: always reports core events
[ 7005.880] (**) Option "Protocol" "standard"
[ 7005.880] (**) Option "XkbRules" "base"
[ 7005.880] (**) Option "XkbModel" "pc105"
[ 7005.880] (**) Option "XkbLayout" "us"
[ 7005.880] (**) Option "config_info" "devd:kbdmux"
[ 7005.881] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[ 7005.899] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 7005.899] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 7005.899] (II) LoadModule: "mouse"
[ 7005.900] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 7005.900] (II) Module mouse: vendor="X.Org Foundation"
[ 7005.900] compiled for 1.17.4, module version = 1.9.1
[ 7005.900] Module class: X.Org XInput Driver
[ 7005.901] ABI class: X.Org XInput driver, version 21.0
[ 7005.901] (II) Using input driver 'mouse' for 'sysmouse'
[ 7005.901] (**) sysmouse: always reports core events
[ 7005.901] (**) Option "Device" "/dev/sysmouse"
[ 7005.901] (==) sysmouse: Protocol: "Auto"
[ 7005.901] (**) sysmouse: always reports core events
[ 7005.902] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 7005.902] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 7005.902] (**) sysmouse: Buttons: 5
[ 7005.902] (**) Option "config_info" "devd:sysmouse"
[ 7005.902] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[ 7005.902] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 7005.903] (**) sysmouse: (accel) acceleration profile 0
[ 7005.903] (**) sysmouse: (accel) acceleration factor: 2.000
[ 7005.903] (**) sysmouse: (accel) acceleration threshold: 4
[ 7005.903] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 7005.903] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 7005.903] (II) config/devd: device /dev/ums0 already opened
[ 7021.722] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 7027.278] (II) config/devd: terminating backend...
[ 7027.278] (II) UnloadModule: "mouse"
[ 7027.278] (II) UnloadModule: "kbd"
[ 7027.286] (II) Server terminated successfully (0). Closing log file.
Отправлено спустя 28 минут 20 секунд:
все оказалось просто.
запустил с ключом -retro, получил сетку и курсор-крестик. мля.
Отправлено спустя 26 секунд:
все оказалось просто.
запустил с ключом -retro, получил сетку и курсор-крестик. мля.
Отправлено спустя 21 секунду:
все оказалось просто.
запустил с ключом -retro, получил сетку и курсор-крестик. мля.
Отправлено спустя 1 минуту 44 секунды:
а вот за три ответа простите. из окна "быстрый ответ№ сервер выдал окошко с ошибкой и ничего не добавил. а оказывается три раза...
