решил вспомнить
http://www.asus.com/Motherboards/C60M1I/
приобрёл сабжевую железку. работает под 9.1 amd64
Код: Выделить всё
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD C-60 APU with Radeon(tm) HD Graphics (1000.00-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 14 Model = 2 Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3667169280 (3497 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 0
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <ALASKA A M I> on motherboard
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110527/psargs-392)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110527/nsinit-380)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
LSI 3ware device driver for SAS/SATA storage controllers, version: 10.80.00.005
tws0: <LSI 3ware SAS/SATA Storage Controller> port 0xe000-0xe0ff mem 0xfea60000-0xfea63fff,0xfea00000-0xfea3ffff irq 16 at device 0.0 on pci1
tws0: Using legacy INTx
tws0: Controller details: Model 9750-4i, 8 Phys, Firmware FH9X 5.12.00.007, BIOS BE9X 5.11.00.006
ahci0: <ATI IXP700 AHCI SATA controller> port 0xf190-0xf197,0xf180-0xf183,0xf170-0xf177,0xf160-0xf163,0xf150-0xf15f mem 0xfeb4b000-0xfeb4b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4a000-0xfeb4afff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb49000-0xfeb490ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb48000-0xfeb48fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb47000-0xfeb470ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf100-0xf10f irq 17 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
hdac0: <ATI SB600 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb46000-0xfeb46fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x48000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 60:a4:4c:3f:db:17
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb45000-0xfeb45fff irq 18 at device 22.0 on pci0
usbus5 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb44000-0xfeb440ff irq 17 at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xce800-0xd07ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0
hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0
pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub4: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
da0 at tws0 bus 0 scbus0 target 0 lun 0
da0: <LSI 9750-4i DISK 5.12> Fixed Direct Access SCSI-5 device
da0: 6000.000MB/s transfers
da0: 5722024MB (11718705152 512 byte sectors: 255H 63S/T 729455C)
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 15624973 Hz quality 800
Trying to mount root from ufs:/dev/label/rootFS [rw]...
tws0: INFO: (0x04: 0x000C): Initialize started: unit=0
Код: Выделить всё
root@Athlon5000:/home/lissyara # pciconf -lvcb
hostb0@pci0:0:0:0: class=0x060000 card=0x853a1043 chip=0x15101022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Complex'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:1:0: class=0x030000 card=0x853a1043 chip=0x98071002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
class = display
subclass = VGA
bar [10] = type Prefetchable Memory, range 32, base 0xc0000000, size 268435456, enabled
bar [14] = type I/O Port, range 32, base 0xf000, size 256, enabled
bar [18] = type Memory, range 32, base 0xfeb00000, size 262144, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
cap 05[a0] = MSI supports 1 message, 64 bit
ecap 000b[100] = unknown 1
pcib1@pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 14h Processor Root Port'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x4)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ahci0@pci0:0:17:0: class=0x01018f card=0x84961043 chip=0x43901002 rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xf190, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xf180, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xf170, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf160, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf150, size 16, enabled
bar [24] = type Memory, range 32, base 0xfeb4b000, size 1024, enabled
cap 12[70] = SATA Index-Data Pair
cap 13[a4] = PCI Advanced Features: FLR TP
ohci0@pci0:0:18:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb4a000, size 4096, enabled
ehci0@pci0:0:18:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb49000, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
ohci1@pci0:0:19:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb48000, size 4096, enabled
ehci1@pci0:0:19:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb47000, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0: class=0x0c0500 card=0x84961043 chip=0x43851002 rev=0x42 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
atapci0@pci0:0:20:1: class=0x01018a card=0x84961043 chip=0x439c1002 rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 IDE Controller'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0xf100, size 16, enabled
hdac0@pci0:0:20:2: class=0x040300 card=0x84151043 chip=0x43831002 rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 Azalia (Intel HDA)'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xfeb40000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
isab0@pci0:0:20:3: class=0x060100 card=0x84961043 chip=0x439d1002 rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 LPC host controller'
class = bridge
subclass = PCI-ISA
pcib2@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
ohci2@pci0:0:20:5: class=0x0c0310 card=0x84961043 chip=0x43991002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb46000, size 4096, enabled
pcib3@pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'SB700/SB800 PCI to PCI bridge (PCIE port 0)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
pcib4@pci0:0:21:1: class=0x060400 card=0x00001002 chip=0x43a11002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'SB700/SB800 PCI to PCI bridge (PCIE port 1)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ohci3@pci0:0:22:0: class=0x0c0310 card=0x84961043 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb45000, size 4096, enabled
ehci2@pci0:0:22:2: class=0x0c0320 card=0x84961043 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xfeb44000, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022 rev=0x43 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 0'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 1'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 2'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 3'
class = bridge
subclass = HOST-PCI
cap 0f[f0] = unknown
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 4'
class = bridge
subclass = HOST-PCI
hostb6@pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 6'
class = bridge
subclass = HOST-PCI
hostb7@pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 5'
class = bridge
subclass = HOST-PCI
hostb8@pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 12h/14h Processor Function 7'
class = bridge
subclass = HOST-PCI
tws0@pci0:1:0:0: class=0x010400 card=0x000113c1 chip=0x101013c1 rev=0x05 hdr=0x00
vendor = '3ware Inc'
device = '9750 SAS2/SATA-II RAID PCIe'
class = mass storage
subclass = RAID
bar [10] = type I/O Port, range 32, base 0xe000, size 256, enabled
bar [14] = type Memory, range 64, base 0xfea60000, size 16384, enabled
bar [1c] = type Memory, range 64, base 0xfea00000, size 262144, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[68] = PCI-Express 2 endpoint max data 128(4096) link x4(x8)
cap 03[d0] = VPD
cap 05[a8] = MSI supports 1 message, 64 bit
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0004[138] = unknown 1
re0@pci0:4:0:0: class=0x020000 card=0x85051043 chip=0x816810ec rev=0x09 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd000, size 256, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xd0004000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xd0000000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(128) link x1(x1)
cap 11[b0] = MSI-X supports 4 messages in map 0x20 enabled
cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 0000000000000000
Код: Выделить всё
root@Athlon5000:/home/lissyara # camcontrol devlist -v
scbus0 on tws0 bus 0:
<LSI 9750-4i DISK 5.12> at scbus0 target 0 lun 0 (pass0,da0)
<> at scbus0 target -1 lun -1 ()
scbus1 on ahcich0 bus 0:
<> at scbus1 target -1 lun -1 ()
scbus2 on ahcich1 bus 0:
<> at scbus2 target -1 lun -1 ()
scbus3 on ahcich2 bus 0:
<> at scbus3 target -1 lun -1 ()
scbus4 on ahcich3 bus 0:
<> at scbus4 target -1 lun -1 ()
scbus5 on ata0 bus 0:
<> at scbus5 target -1 lun -1 ()
scbus6 on ata1 bus 0:
<> at scbus6 target -1 lun -1 ()
scbus7 on ctl2cam0 bus 0:
<> at scbus7 target -1 lun -1 ()
scbus-1 on xpt0 bus 0:
<> at scbus-1 target -1 lun -1 (xpt0)
Код: Выделить всё
root@Athlon5000:/home/lissyara # usbconfig list
ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <EHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <EHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen5.1: <OHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen6.1: <EHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
