FreeBSD + Huawei E220 (E156G)

Решение проблем связванных с работой железа. Проблемы программно-аппаратной совместимости.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Ответить
umart
проходил мимо
Сообщения: 3
Зарегистрирован: 2009-05-23 16:08:37

FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение umart » 2009-06-17 21:22:43

Доброго времени суток,
Не могу подключить модем Huawei E156G во freebsd. Изменения в ядро вносил вручную как для E220, согласно инструкции на http://mustakim.blogster.com/huawei-e-220-on-freebsd .

Код: Выделить всё

gsmrouter# uname -a
FreeBSD gsmrouter.local 6.3-RELEASE-p3 FreeBSD 6.3-RELEASE-p3 #3: Wed Jun 17 19:42:39 EEST 2009     root@gsmrouter.local:/usr/obj/usr/src/sys/GENERIC  i386

Код: Выделить всё

gsmrouter# less /boot/loader.conf
ubsa_load="YES"
umass_load="YES"

Код: Выделить всё

gsmrouter# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 3: high speed, self powered, unconfigured, HUAWEI Mobile(0x1003), HUAWEI Technology(0x12d1), rev 0.00
port 6 powered
port 7 powered
port 8 addr 2: high speed, power 80 mA, config 1, USB Mass Storage Device(0x0163), USBest Technology(0x1307), rev 1.00
После перезагрузки в /var/log/messages

Код: Выделить всё

Jun 17 20:40:14 gsmrouter kernel: ucom0: HUAWEI Technology HUAWEI Mobile, rev 2.00/0.00, addr 3
Jun 17 20:40:14 gsmrouter kernel: ucom0: failed to set configuration: STALLED
Jun 17 20:40:14 gsmrouter kernel: device_attach: ucom0 attach returned 6
Jun 17 20:40:15 gsmrouter kernel: ucom0: at uhub4 port 5 (addr 3) disconnected
Jun 17 20:40:22 gsmrouter kernel: ucom0: HUAWEI Technology HUAWEI Mobile, rev 2.00/0.00, addr 3
Jun 17 20:40:22 gsmrouter kernel: ucom0: failed to set configuration: STALLED
Jun 17 20:40:22 gsmrouter kernel: device_attach: ucom0 attach returned 6
Jun 17 20:40:22 gsmrouter kernel: ucom0: HUAWEI Technology HUAWEI Mobile, rev 2.00/0.00, addr 3
Jun 17 20:40:22 gsmrouter kernel: ucom0: failed to set configuration: STALLED
Jun 17 20:40:22 gsmrouter kernel: device_attach: ucom0 attach returned 6
В /dev устройства ucom0 нет.

Патчинг ядра, как сказано на http://www.freebsd.org/cgi/query-pr.cgi?pr=118686 и http://www.freebsd.org/cgi/query-pr.cgi?pr=122905 не проходит и завершается с ошибками.
Вернуться к началу
Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/
Вернуться к началу
cenix
рядовой
Сообщения: 30
Зарегистрирован: 2009-02-07 23:33:27

Re: FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение cenix » 2009-06-17 22:13:03

Вам стоит обновится до 7,2 или current, в них включен новый драйвер для 3G модемов - u3g http://people.freebsd.org/~n_hibma/u3g.html
В нем заявлена поддерка вашей модели.
Вернуться к началу
umart
проходил мимо
Сообщения: 3
Зарегистрирован: 2009-05-23 16:08:37

Re: FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение umart » 2009-06-18 16:20:33

поставил 7.2, обновился до CURRENT

Код: Выделить всё

gsmrouter# uname -a
FreeBSD gsmrouter.local 7.2-STABLE FreeBSD 7.2-STABLE #0: Thu Jun 18 13:14:53 EEST 2009     root@gsmrouter.local:/usr/obj/usr/src/sys/GENERIC  i386
в ядре отключил umass и cd. Скачал и скомпилил usb_modeswitch. Расскоментировал строки для е220 в /etc/usb_modeswitch.conf.

Код: Выделить всё

gsmrouter# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 addr 2: high speed, self powered, config 1, HUAWEI Mobile(0x1003), HUAWEI Technology(0x12d1), rev 0.00

Код: Выделить всё

gsmrouter#

 * usb_modeswitch: tool for controlling "flip flop" mode USB devices
 * Version 1.0.2 (C) Josua Dietze 2009
 * Works with libusb 0.1.12 and probably other versions

Reading config file: /etc/usb_modeswitch.conf
DefaultVendor=  0x12d1
DefaultProduct= 0x1003
TargetVendor=   0x12d1
TargetProduct=  0x1003
TargetClass=    not set

DetachStorageOnly=0
HuaweiMode=1
SierraMode=0
SonyMode=0
MessageEndpoint= not set
MessageContent= not set
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice enabled (default)
Success check disabled

usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found /dev/usb0
usb_os_find_busses: Found /dev/usb1
usb_os_find_busses: Found /dev/usb2
usb_os_find_busses: Found /dev/usb3
usb_os_find_busses: Found /dev/usb4
usb_os_find_devices: Found /dev/ugen0 on /dev/usb4
usb_control_msg: 128 6 512 0 0xbfbfebf4 8 1000
usb_control_msg: 128 6 512 0 0x2820c080 108 1000

Looking for target devices ...
 Found devices in target mode or class (1)
Looking for default devices ...
 Found default devices (1)
Accessing device 000 on bus 000 ...
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry

Device description data (identification)
-------------------------
usb_control_msg: 128 6 768 0 0xbfbfeb1d 255 1000
usb_control_msg: 128 6 770 1033 0xbfbfeb1d 255 1000
Manufacturer: HUAWEI Technology
usb_control_msg: 128 6 768 0 0xbfbfeb1d 255 1000
usb_control_msg: 128 6 769 1033 0xbfbfeb1d 255 1000
     Product: HUAWEI Mobile
  Serial No.: not provided
-------------------------
Sending Huawei control message ...
usb_control_msg: 0 3 1 0 0x804ea00 0 1000
 OK, Huawei control message sent
-> Run lsusb to note any changes. Bye.
И все, чуда не произошло... В какую сторону смотреть?
Вернуться к началу
cenix
рядовой
Сообщения: 30
Зарегистрирован: 2009-02-07 23:33:27

Re: FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение cenix » 2009-06-18 18:30:47

Usb_modeswitch здесь ни причем, он не работает.
Если у вас после подключения модема он определяется как cd0, то попробуйте
camcontrol eject cd0
а после этого подгружайте u3g, если он не вкомпилен в ядро.
Смотрите в dmesg что он пишет.
Вернуться к началу
umart
проходил мимо
Сообщения: 3
Зарегистрирован: 2009-05-23 16:08:37

Re: FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение umart » 2009-06-19 9:14:59

при включении определяется как

Код: Выделить всё

ugen0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on uhub4
после загрузки u3g ничего не меняется.

ps
да и по-поводу CURRENT я погарячился, у меня 7.2 STABLE
Вернуться к началу
Demiurg
мл. сержант
Сообщения: 142
Зарегистрирован: 2008-03-13 22:16:57

Re: FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение Demiurg » 2009-06-23 14:52:12

Снес сегодня gentoo с EEE 901, сейчас мир собирается с 7.2-STABLE... модем есть E220... попробую, отпишусь...
Вернуться к началу
Аватара пользователя
MiD
проходил мимо
Сообщения: 1
Зарегистрирован: 2010-01-20 21:17:52
Откуда: Норка
Контактная информация:
Контактная информация пользователя MiD

FreeBSD + Huawei E220 (E156G)

Непрочитанное сообщение MiD » 2010-01-22 23:25:13

Победил E220 на FreeBSD 8.0-RELEASE. После установки системы не устанавливал ничего, не включал модулей, не делал вообще никаких настроек, кроме ppp. Т.е. просто установил систему и воткнул мопед:

dmesg

Код: Выделить всё

...
ugen2.2: <HUAWEI Technologies> at usbus2
u3g0: <Data Interface> on usbus2
u3g0: Found 2 ports.
umass0: <HUAWEI Technologies HUAWEI Mobile, class 0/0, rev 1.10/0.00, addr 2> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device 
cd0: 1.000MB/s transfers
cd0: cd present [16896 x 2048 byte records]
...
В автозагрузку можно включить camcontrol eject cd0, чтобы отключить CD модема.

настройка ppp.conf (команды для модема перед коннектом частично стырил с Винды сниффером):

Код: Выделить всё

mts:
 set device /dev/ttyU0.0
 set speed 460800

 set dial "\"\" \
	  AT OK \
	  AT OK \
	  ATS0=0 OK \
	  AT OK \
	  AT&FE0V1X1&D2&C1S0=0 OK \
	  AT OK \
	  AT+CGDCONT=1,\\\"IP\\\",\\\"internet.mts.ru\\\" OK \
	  ATDT*99# CONNECT"

 set login
 set authname "mts"
 set authkey "mts"

 disable ipv6cp
 disable pap
 disable chap
 enable dns

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR                    # Add a (sticky) default route
Если ifaddr 0 0 (как я всегда ставлю на VPN соединения), то модем не получает IP.
Подключаем: ppp -ddial mts

Лог ppp.log:

Код: Выделить всё

Jan 22 03:12:23 d00544a ppp[1067]: Phase: Using interface: tun0
Jan 22 03:12:23 d00544a ppp[1067]: Phase: deflink: Created in closed state
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: default: set speed 115200
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: default: set timeout 180
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: default: enable dns
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set device /dev/ttyU0.0
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set speed 460800
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set dial "" 	  AT OK 	  AT OK 	  ATS0=0 OK 	  AT OK 	  AT&FE0V1X1&D2&C1S0=0 OK 	  AT OK 	  AT+CGDCONT=1,\"IP\",\"internet.mts.ru\" OK 	  ATDT*99# CONNECT
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set login
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set authname mts
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set authkey ********
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: disable ipv6cp
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: disable pap
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: disable chap
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: enable dns
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Jan 22 03:12:23 d00544a ppp[1067]: tun0: Command: mts: add default HISADDR
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: PPP Started (ddial mode).
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: bundle: Establish
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: deflink: closed -> opening
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: deflink: Connected!
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: deflink: opening -> dial
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: ATS0=0^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT&FE0V1X1&D2&C1S0=0^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT+CGDCONT=1,"IP","internet.mts.ru"^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): OK
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: OK^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: ATDT*99#^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Expect(30): CONNECT
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: ^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Received: CONNECT 7200000^M
Jan 22 03:12:23 d00544a ppp[1078]: tun0: Phase: deflink: dial -> carrier
Jan 22 03:12:24 d00544a ppp[1078]: tun0: Phase: deflink: /dev/ttyU0.0 doesn't support CD
Jan 22 03:12:24 d00544a ppp[1078]: tun0: Phase: deflink: carrier -> login
Jan 22 03:12:24 d00544a ppp[1078]: tun0: Phase: deflink: login -> lcp
Jan 22 03:12:24 d00544a ppp[1078]: tun0: LCP: FSM: Using "deflink" as a transport
Jan 22 03:12:24 d00544a ppp[1078]: tun0: LCP: deflink: State change Initial --> Closed
Jan 22 03:12:24 d00544a ppp[1078]: tun0: LCP: deflink: State change Closed --> Stopped
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: LayerStart
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACFCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  PROTOCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACCMAP[6] 0x00000000
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MRU[4] 1500
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MAGICNUM[6] 0xc0795c22
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: State change Stopped --> Req-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: RecvConfigReq(45) state = Req-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MRU[4] 1440
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACCMAP[6] 0x00000000
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MAGICNUM[6] 0x010e29d2
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  PROTOCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACFCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: SendConfigAck(45) state = Req-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MRU[4] 1440
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACCMAP[6] 0x00000000
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MAGICNUM[6] 0x010e29d2
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  PROTOCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACFCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: State change Req-Sent --> Ack-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACFCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  PROTOCOMP[2]
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  ACCMAP[6] 0x00000000
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MRU[4] 1500
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MAGICNUM[6] 0xc0795c22
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: State change Ack-Sent --> Opened
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: LayerUp
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: SendIdent(0) state = Opened
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  MAGICNUM c0795c22
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP:  TEXT user-ppp 3.4.2 (built COMPILATIONDATE)
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: bundle: Authenticate
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: RecvDiscardReq(46) state = Opened
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from UMTS_CHAP_SRVR)
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: Chap Output: RESPONSE (mts)
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: Chap Input: SUCCESS
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: Using trigger address 0.0.0.0
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: FSM: Using "deflink" as a transport
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: deflink: State change Initial --> Closed
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: deflink: LayerStart.
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: MPPE: Not usable without CHAP81
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: deflink: SendConfigReq(1) state = Closed
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP:  DEFLATE[4] win 15
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP:  PRED1[2] 
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: deflink: State change Closed --> Req-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: deflink: lcp -> open
Jan 22 03:12:25 d00544a ppp[1078]: tun0: Phase: bundle: Network
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: FSM: Using "deflink" as a transport
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: deflink: State change Initial --> Closed
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: deflink: LayerStart.
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 172.22.100.1
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 255.255.255.255
Jan 22 03:12:25 d00544a ppp[1078]: tun0: IPCP: deflink: State change Closed --> Req-Sent
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: RecvProtocolRej(47) state = Opened
Jan 22 03:12:25 d00544a ppp[1078]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was rejected!
Jan 22 03:12:25 d00544a ppp[1078]: tun0: CCP: deflink: State change Req-Sent --> Stopped
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(1) state = Req-Sent
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(2) state = Req-Sent
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:27 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(2) state = Req-Sent
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(3) state = Req-Sent
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:28 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(3) state = Req-Sent
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(4) state = Req-Sent
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:29 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(4) state = Req-Sent
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(5) state = Req-Sent
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:30 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(5) state = Req-Sent
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(6) state = Req-Sent
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:31 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(6) state = Req-Sent
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(7) state = Req-Sent
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:32 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(7) state = Req-Sent
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(8) state = Req-Sent
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:33 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(8) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRINBNS[6] 10.11.12.13
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 130 - NAK??
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECNBNS[6] 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: MS NBNS req 132 - NAK??
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 10.11.12.13
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(9) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigReq(24) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:   [EMPTY]
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigNak(24) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 10.0.0.2
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigRej(9) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: LCP: deflink: SendIdent(1) state = Opened
Jan 22 03:12:34 d00544a ppp[1078]: tun0: LCP:  MAGICNUM c0795c22
Jan 22 03:12:34 d00544a ppp[1078]: tun0: LCP:  TEXT user-ppp 3.4.2 (built COMPILATIONDATE)
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(10) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 10.11.12.13
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 10.11.12.14
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigReq(25) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:   [EMPTY]
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigAck(25) state = Req-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:   [EMPTY]
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigNak(10) state = Ack-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 172.24.39.180
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] changing address: 0.0.0.0  --> 172.24.39.180
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 217.8.235.194
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 217.8.235.82
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: Primary nameserver set to 217.8.235.194
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: Secondary nameserver set to 217.8.235.82
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: SendConfigReq(11) state = Ack-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 172.24.39.180
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 217.8.235.194
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 217.8.235.82
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: RecvConfigAck(11) state = Ack-Sent
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  IPADDR[6] 172.24.39.180
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  PRIDNS[6] 217.8.235.194
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP:  SECDNS[6] 217.8.235.82
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: State change Ack-Sent --> Opened
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: deflink: LayerUp.
Jan 22 03:12:34 d00544a ppp[1078]: tun0: IPCP: myaddr 172.24.39.180 hisaddr = 10.0.0.2
IP получен (см.последнюю строчку лога). Инет работает...
Так же обратите внимание те, у кого ошибка после посылки строки инициализации оператора:

Код: Выделить всё

Jan 22 03:12:23 d00544a ppp[1078]: tun0: Chat: Send: AT+CGDCONT=1,"IP","internet.mts.ru"
У некоторых я заметил, что в логах кавычки отсутствуют (т.е. модему передается строка, но кавычки отсутствуют там, где они должны быть). У меня, по крайней мере, модем принимает только с кавычками.
Даже если спирт замерзнет, все равно его не брошу,
буду грызть его зубами потому, что он хороший...
Вернуться к началу