изменения номера устройства

Решение проблем связванных с работой железа. Проблемы программно-аппаратной совместимости.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Andy
ст. лейтенант
Сообщения: 1117
Зарегистрирован: 2007-03-04 7:48:58
Откуда: Mytischi

изменения номера устройства

Непрочитанное сообщение Andy » 2007-08-20 19:54:35

После того, как отрубили электричество в здании, сервер с фри начал считать что винт ad4s1, почему-то стал ad12s1.
я конечно /etc/fstab поправил. А как обратно все вернуть?
atacontrol list

Код: Выделить всё

andy@freebsd:~> sudo atacontrol list
ATA channel 0:
    Master: acd0 <SONY CD-ROM CDU5221/1.02> ATA/ATAPI revision 0
    Slave:       no device present
ATA channel 1:
    Master:      no device present
    Slave:       no device present
ATA channel 2:
    Master:      no device present
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present
ATA channel 4:
    Master:      no device present
    Slave:       no device present
ATA channel 5:
    Master:      no device present
    Slave:       no device present
ATA channel 6:
    Master: ad12 <ST380013AS/3.05> Serial ATA v1.0
    Slave:       no device present
ATA channel 7:
    Master:      no device present
    Slave:       no device present
dmesg

Код: Выделить всё

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p5 #0: Fri Jun 29 14:17:25 MSD 2007
    root@freebsd.radiant:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <INTEL  PRODUCT1>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
  Logical CPUs per core: 2
real memory  = 1072889856 (1023 MB)
avail memory = 1040896000 (992 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL PRODUCT1> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x9c00-0x9c1f mem 0xfc9e0000-0xfc9fffff irq 18 at device 1.0 on pci2
em0: Ethernet address: 00:0c:f1:8a:f9:ef
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 6.0 (no driver attached)
atapci0: <Promise PDC20319 SATA150 controller> port 0xbc00-0xbc3f,0xb400-0xb40f,0xb000-0xb07f mem 0xfeafe000-0xfeafefff,0xfeaa0000-0xfeabffff irq 17 at device 7.0 on pci3
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
ata5: <ATA channel 3> on atapci0
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xac00-0xac3f mem 0xfeafd000-0xfeafdfff irq 20 at device 8.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0c:f1:8a:f9:f1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <Intel ICH5 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f irq 18 at device 31.2 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2593512356 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <SONY CD-ROM CDU5221/1.02> at ata0-master UDMA33
ad12: 76319MB <Seagate ST380013AS 3.05> at ata6-master SATA150
Trying to mount root from ufs:/dev/ad12s1a
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad12s1b as swap device
Starting file system checks:
Mounting local file systems:
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Jul 16 19:37:15 freebsd sshd[4152]: Invalid user idiot from 210.75.200.104

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35332
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: изменения номера устройства

Непрочитанное сообщение Alex Keda » 2007-08-20 20:49:55

да нормально всё.
на 6-м канале - и должен быть 12 винт.
Убей их всех! Бог потом рассортирует...

Andy
ст. лейтенант
Сообщения: 1117
Зарегистрирован: 2007-03-04 7:48:58
Откуда: Mytischi

Re: изменения номера устройства

Непрочитанное сообщение Andy » 2007-08-20 21:39:21

Но раньше по другому было. :?
Jul 16 19:37:15 freebsd sshd[4152]: Invalid user idiot from 210.75.200.104

Аватара пользователя
Alex Keda
стреляли...
Сообщения: 35332
Зарегистрирован: 2004-10-18 14:25:19
Откуда: Made in USSR
Контактная информация:

Re: изменения номера устройства

Непрочитанное сообщение Alex Keda » 2007-08-20 23:26:03

могу тока предположить что в БИОС чё-то изменилось...
Убей их всех! Бог потом рассортирует...