LSI Logic Megaraid 8208elp не видит тома

[Гость]

Добрый день!
У меня контроллер LSI Logic Megaraid 8208elp/8204elp 6 дисков SAS. (полужелезный)
Создаю средствами БИОС том, пробую ставить на этот том FreeBSD 7, но том не виден. Видны по отдельности 6 моих дисков.
Пробовал:
1.Отключал acpi и загружал mfi., аналогично.
2."Рассыпал" том, пробовал поставить на отдельный (1-й) диск, а затем создать софт-RAID с пом. vinum.Но после установки системы, загрузчик ну видит диск и выдаёт сообщение об отсутствии UFS.
3.На сайте производителя драйверы только под Винду и Линукс.
4. Уважаемые товарищи, подскажите в какую сторону двигаться?

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[eug.l]

добавляю dmesg -a

Код: Выделить всё

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz (2006.98-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xce33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,<b19>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
real memory  = 2680160256 (2556 MB)
avail memory = 2609262592 (2488 MB)
MPTable: <INTEL    S5000VSA    >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID:  6
 cpu7 (AP): APIC ID:  7
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
cpu0 on motherboard
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1 on motherboard
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2 on motherboard
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3 on motherboard
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4 on motherboard
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5 on motherboard
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6 on motherboard
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7 on motherboard
p4tcc7: <CPU Frequency Thermal Control> on cpu7
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: unable to route slot 8 INTA
pcib0: unable to route slot 28 INTA
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: unable to route slot 2 INTA
pcib2: <PCI-PCI bridge> irq 10 at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib0: unable to route slot 2 INTA
pcib0: unable to route slot 2 INTB
pcib0: unable to route slot 2 INTC
pcib3: <MPTable PCI-PCI bridge> irq 10 at device 0.0 on pci2
pci3: <PCI bus> on pcib3
mpt0: <LSILogic SAS/SATA Adapter> port 0x3000-0x30ff mem 0xb8910000-0xb8913fff,0xb8900000-0xb890ffff irq 16 at device 0.0 on pci3
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
pcib4: <PCI-PCI bridge> irq 11 at device 1.0 on pci2
pci4: <PCI bus> on pcib4
pcib5: <MPTable PCI-PCI bridge> irq 5 at device 2.0 on pci2
pci5: <PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x2020-0x203f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5
em0: Using MSI interrupt
em0: Ethernet address: 00:15:17:61:1b:70
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x2000-0x201f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5
em1: Using MSI interrupt
em1: Ethernet address: 00:15:17:61:1b:71
em1: [FILTER]
pcib6: <PCI-PCI bridge> at device 0.3 on pci1
pci6: <PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib8: <PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci8: <PCI bus> on pcib8
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4060-0x407f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f irq 23 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4020-0x403f irq 22 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.42, addr 2> on uhub4
umass0: Get Max Lun not supported (STALLED)
pcib9: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci9: <PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xce800-0xcf7ff,0xcf800-0xd07ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0d06518
acd0: DVDR <HL-DT-STDVD-RAM GSA-H55L/1.03> at ata0-master UDMA66
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da1: 300.000MB/s transfers
da1: Command Queueing Enabled
da1: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
da2 at mpt0 bus 0 target 2 lun 0
da2: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da2: 300.000MB/s transfers
da2: Command Queueing Enabled
da2: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
da3 at mpt0 bus 0 target 3 lun 0
da3: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da3: 300.000MB/s transfers
da3: Command Queueing Enabled
da3: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
da4 at mpt0 bus 0 target 4 lun 0
da4: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da4: 300.000MB/s transfers
da4: Command Queueing Enabled
da4: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
da5 at mpt0 bus 0 target 5 lun 0
da5: <SEAGATE ST3146855SS 0002> Fixed Direct Access SCSI-5 device 
da5: 300.000MB/s transfers
da5: Command Queueing Enabled
da5: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
da6 at umass-sim0 bus 0 target 0 lun 0
da6: <JetFlash TS4GJFV90 8.07> Removable Direct Access SCSI-2 device 
da6: 40.000MB/s transfers
da6: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_LiveFS.
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x11 ascq=0x00 
GEOM_LABEL: Label for provider da6s1 is msdosfs/\M^^\^L.
Trying to mount root from ufs:/dev/md0
GEOM_LABEL: Label msdosfs/\M^^\^L removed.
GEOM_LABEL: Label for provider da6s1 is msdosfs/\M^^\^L.
umass0: at uhub4 port 6 (addr 2) disconnected
(da6:umass-sim0:0:0:0): lost device
(da6:umass-sim0:0:0:0): removinGg EdOeMv_iLcAeB EeLn:t rLya
bel msdosfs/\M^^\^L removed.
umass0: detached
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.42, addr 2> on uhub4
umass0: Get Max Lun not supported (STALLED)
da6 at umass-sim0 bus 0 target 0 lun 0
da6: <JetFlash TS4GJFV90 8.07> Removable Direct Access SCSI-2 device 
da6: 40.000MB/s transfers
da6: 3911MB (8011774 512 byte sectors: 255H 63S/T 498C)
GEOM_LABEL: Label for provider da6s1 is msdosfs/\M^^\^L.
GEOM_LABEL: Label msdosfs/\M^^\^L removed.

pciconf -lv

Код: Выделить всё

hostb0@pci0:0:0:0:	class=0x060000 card=0x34848086 chip=0x25d48086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:2:0:	class=0x060400 card=0x00000000 chip=0x25f78086 rev=0xb1 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib7@pci0:0:3:0:	class=0x060400 card=0x00000000 chip=0x25e38086 rev=0xb1 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
none0@pci0:0:8:0:	class=0x088000 card=0x34848086 chip=0x1a388086 rev=0xb1 hdr=0x00
    class      = base peripheral
hostb1@pci0:0:16:0:	class=0x060000 card=0x34848086 chip=0x25f08086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb2@pci0:0:16:1:	class=0x060000 card=0x34848086 chip=0x25f08086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb3@pci0:0:16:2:	class=0x060000 card=0x34848086 chip=0x25f08086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb4@pci0:0:17:0:	class=0x060000 card=0x34848086 chip=0x25f18086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb5@pci0:0:19:0:	class=0x060000 card=0x34848086 chip=0x25f38086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb6@pci0:0:21:0:	class=0x060000 card=0x34848086 chip=0x25f58086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
hostb7@pci0:0:22:0:	class=0x060000 card=0x34848086 chip=0x25f68086 rev=0xb1 hdr=0x00
    class      = bridge
    subclass   = HOST-PCI
pcib8@pci0:0:28:0:	class=0x060400 card=0x34848086 chip=0x26908086 rev=0x09 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:	class=0x0c0300 card=0x34848086 chip=0x26888086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:	class=0x0c0300 card=0x34848086 chip=0x26898086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:	class=0x0c0300 card=0x34848086 chip=0x268a8086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = USB
uhci3@pci0:0:29:3:	class=0x0c0300 card=0x34848086 chip=0x268b8086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:	class=0x0c0320 card=0x34848086 chip=0x268c8086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = USB
pcib9@pci0:0:30:0:	class=0x060401 card=0x34848086 chip=0x244e8086 rev=0xd9 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x34848086 chip=0x26708086 rev=0x09 hdr=0x00
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x34848086 chip=0x269e8086 rev=0x09 hdr=0x00
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x01018f card=0x34848086 chip=0x26808086 rev=0x09 hdr=0x00
    class      = mass storage
    subclass   = ATA
none1@pci0:0:31:3:	class=0x0c0500 card=0x34848086 chip=0x269b8086 rev=0x09 hdr=0x00
    class      = serial bus
    subclass   = SMBus
pcib2@pci0:1:0:0:	class=0x060400 card=0x34848086 chip=0x35008086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:1:0:3:	class=0x060400 card=0x34848086 chip=0x350c8086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:2:0:0:	class=0x060400 card=0x34848086 chip=0x35108086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:2:1:0:	class=0x060400 card=0x34848086 chip=0x35148086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:2:2:0:	class=0x060400 card=0x34848086 chip=0x35188086 rev=0x01 hdr=0x01
    class      = bridge
    subclass   = PCI-PCI
mpt0@pci0:3:0:0:	class=0x010000 card=0x30021000 chip=0x00591000 rev=0x04 hdr=0x00
    class      = mass storage
    subclass   = SCSI
em0@pci0:5:0:0:	class=0x020000 card=0x34848086 chip=0x10968086 rev=0x01 hdr=0x00
    class      = network
    subclass   = ethernet
em1@pci0:5:0:1:	class=0x020000 card=0x34848086 chip=0x10968086 rev=0x01 hdr=0x00
    class      = network
    subclass   = ethernet
vgapci0@pci0:9:12:0:	class=0x030000 card=0x34848086 chip=0x515e1002 rev=0x02 hdr=0x00
    class      = display
    subclass   = VGA

[Fastman]

Обсуждали ниже:
http://forum.lissyara.su/viewtopic.php?f=5&t=11186

[Гость]

Это другой контроллер.
Все эти советы прочёл.
Не подходят.

[manefesto]

регулярно в этой теме появляется спам. тему закрываю