Монтирование MMC флешек

[Scutarius]

Поставил FreeBSD 7.2 на ноут ASUS F5RL. Есть 2 разные MMC флешки. Монтирую одну, все нормально. Размонтирую, достаю, вставляю другую, монтирую - отказывается. Как я заметил, параметры USB флешки динамически определяются когда их вставляешь в разъем. С ММС такого нет... и раз первоначально определилась допустим первая такая флешка, то только ее я могу использовать. Другой способ - перезагрузится и монтировать другую. Но так не интересно.Подскажите выход с этой ситуации

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Alex Keda]

попробуй Мотину написать...
а вообще, кард-ридер какой? УСБ или нет?

[manefesto]

Код: Выделить всё

pciconf -lv
uname -a

[paradox]

usbdevs -v
но думаю проблема не в кард ридере
он же не опеределяеться как кард ридер
он определяеться как какойто da%d

[Scutarius]

Верно, он определяется как da0s1

[paradox]

dmesg лучше сюда запостите

Размонтирую, достаю, вставляю другую, монтирую - отказывается

особенно этот момент

[Scutarius]

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat Sep  5 23:59:31 UTC 2009
    root@:/usr/obj/usr/src/sys/SNAKE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (1463.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 939130880 (895 MB)
avail memory = 909389824 (867 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=454192kB.
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xcfffffff,0xfa8f0000-0xfa8fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfa9f0000-0xfa9fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:49:49:58
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xfeac0000-0xfeafffff irq 18 at device 0.0 on pci6
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:1d:60:b9:18:8b
ae0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/16.10, addr 2> on uhub5
ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PSS] (Node 0xc3de6a00), AE_AML_PACKAGE_LIMIT
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ-850S/1.21> at ata0-master UDMA33
ad4: 114473MB <Hitachi HTS542512K9SA00 BB2OC31P> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- xD/SDMMC/MS/Pro 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 30MB (62720 512 byte sectors: 64H 32S/T 30C)
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xc42cb750, 0) error 19
ae0: link state changed to UP
umass1: <Transcend T.sonic 610, class 0/0, rev 1.10/10.01, addr 2> on uhub3
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <T.sonic 610 0100> Removable Direct Access SCSI-4 device 
da1: 1.000MB/s transfers
da1: 950MB (486400 2048 byte sectors: 64H 32S/T 237C)
umass1: at uhub3 port 2 (addr 2) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat Sep  5 23:59:31 UTC 2009
    root@:/usr/obj/usr/src/sys/SNAKE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (1463.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 939130880 (895 MB)
avail memory = 909389824 (867 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=454192kB.
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xcfffffff,0xfa8f0000-0xfa8fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfa9f0000-0xfa9fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:49:49:58
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xfeac0000-0xfeafffff irq 18 at device 0.0 on pci6
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:1d:60:b9:18:8b
ae0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfebfc000-0xfebfcfff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfebfb000-0xfebfbfff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfebfa000-0xfebfafff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/16.10, addr 2> on uhub5
ugen0: <Syntek USB2.0, class 0/0, rev 2.00/0.05, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PSS] (Node 0xc3de6a00), AE_AML_PACKAGE_LIMIT
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ-850S/1.21> at ata0-master UDMA33
ad4: 114473MB <Hitachi HTS542512K9SA00 BB2OC31P> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- xD/SDMMC/MS/Pro 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xc42c2750, 0) error 19
ae0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat Sep  5 23:59:31 UTC 2009
    root@:/usr/obj/usr/src/sys/SNAKE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (1463.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 939130880 (895 MB)
avail memory = 909389824 (867 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=454192kB.
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xcfffffff,0xfa8f0000-0xfa8fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfa9f0000-0xfa9fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:49:49:58
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xfeac0000-0xfeafffff irq 18 at device 0.0 on pci6
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:1d:60:b9:18:8b
ae0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq  rev 2.00/0.05, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PSS] (Node 0xc3de6a00), AE_AML_PACKAGE_LIMIT
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ-850S/1.21> at ata0-master UDMA33
ad4: 114473MB <Hitachi HTS542512K9SA00 BB2OC31P> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- xD/SDMMC/MS/Pro 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xc42c2750, 0) error 19
ae0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat Sep  5 23:59:31 UTC 2009
    root@:/usr/obj/usr/src/sys/SNAKE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (1463.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 939130880 (895 MB)
avail memory = 909389824 (867 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=454192kB.
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xcfffffff,0xfa8f0000-0xfa8fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfa9f0000-0xfa9fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:49:49:58
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xfeac0000-0xfeafffff irq 18 at device 0.0 on pci6
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:1d:60:b9:18:8b
ae0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq  rev 2.00/0.05, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PSS] (Node 0xc3de6a00), AE_AML_PACKAGE_LIMIT
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <MATSHITADVD-RAM UJ-850S/1.21> at ata0-master UDMA33
ad4: 114473MB <Hitachi HTS542512K9SA00 BB2OC31P> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- xD/SDMMC/MS/Pro 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4aa2f2701702d704.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4aa2f270519379fd.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4aa2f270a690f2b7.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4aa2f276ee2e72bf.
GEOM_LABEL: Label ufsid/4aa2f2701702d704 removed.
GEOM_LABEL: Label ufsid/4aa2f270519379fd removed.
GEOM_LABEL: Label ufsid/4aa2f270a690f2b7 removed.
GEOM_LABEL: Label ufsid/4aa2f276ee2e72bf removed.
fire_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (fire_saver, 0xc42c2750, 0) error 19
ae0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Sat Sep  5 23:59:31 UTC 2009
    root@:/usr/obj/usr/src/sys/SNAKE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz (1463.10-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 939130880 (895 MB)
avail memory = 909389824 (867 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=454192kB.
acpi0: <_ASUS_ Notebook> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 37f00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xcfffffff,0xfa8f0000-0xfa8fffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfa9f0000-0xfa9fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:15:af:49:49:58
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib4
ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xfeac0000-0xfeafffff irq 18 at device 0.0 on pci6
ae0: Using MSI messages.
miibus0: <MII bus> on ae0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: Ethernet address: 00:1d:60:b9:18:8b
ae0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib5
atapci0: <ATI IXP600 SATA300 controller> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f mem 0xfebffc00-0xfebfffff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfebfd000-0xfebfdfff irq  rev 2.00/0.05, addr 3> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130b2b06000b2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Exception (exoparg2-0559): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070320]
ACPI Error (psparse-0626): Method parse/executio

[Scutarius]

• # mount_msdosfs /dev/da0s1 /mnt/MMC/
  # ls /mnt/MMC/
  .cshrc
  SNAKE
  httpd.conf
  make.conf
  php.ini
  rc.conf
  xorg.conf.new
  # umount /mnt/MMC/
  
  # тут я вставляю другую флеху
  
  # mount_msdosfs /dev/da0s1 /mnt/MMC/
  mount_msdosfs: /dev/da0s1: : Operation not permitted
  
  # Если обратно вставлю первую, ее нормально монтирует

[paradox]

дааа не повезло вам на 7
на 8 есть usbconfig
утилита которая ребутит usb порт
у лисяры в вики есть пример использования
вот это вам поидеи должно помочь
но увы токо для 8

[Scutarius]

Классно)) буду юзать 7 и ждать 8 )
А можете дать ссылку на пример в вики?

[paradox]

а что ее ждать если она уже 8 бета3
wiki.lissyara.su
ищи дето там

[Scutarius]

жду RELEASE) не хочу бету юзать

[paradox]

тю а смысл ждать?
там ничего особого не поменяеться
это щас например 9куррент огого пилят

[Alex Keda]

тю а смысл ждать?
там ничего особого не поменяеться
это щас например 9куррент огого пилят

ого-го...
у меня на amd64 аж bwi систему в кернел паник вгоняет ))

[paradox]

тю так у тебя тоже
а мы тут в теме броадкома голову ломаем почему 9куррент и броадком паник на панике)
еклмн как же мне тогда отлаживать
у меня тоже уже куррент везде

[zoid]

Вставив новую флешку, попробуй:

Код: Выделить всё

dd if=/dev/null of=/dev/da0

После записи (даже понарошку, как в нашем варианте) девайс должен перетейститься. У меня во всяком случае это работает.