Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Решение проблем связванных с работой железа. Проблемы программно-аппаратной совместимости.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
Аватара пользователя
RusBiT
лейтенант
Сообщения: 635
Зарегистрирован: 2007-08-03 11:43:53
Откуда: Красноярск
Контактная информация:

Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение RusBiT » 2008-10-14 17:31:56

Система не определяет HDD SATA 750Gb Seagate <ST3750330NS>, в dmesg ничего нету.
В биосе распаздается.
Подскажите куда копать :smile:
Чем больше я познаю FreeBSD, тем больше я считаю себя ламером :)

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
Fastman
ст. лейтенант
Сообщения: 1236
Зарегистрирован: 2006-07-07 10:20:38
Откуда: Минск. РБ

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение Fastman » 2008-10-14 20:31:49

вывод dmesg в студию..
странно конечно
у меня террабайтник завелся без бубна...

Код: Выделить всё

ad4: 953869MB <Seagate ST31000333AS SD15> at ata2-master SATA150
Главное в жизни здоровье и любовь, остальное я все куплю.

bu7cher
сержант
Сообщения: 220
Зарегистрирован: 2008-02-21 18:28:55
Откуда: Киров
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение bu7cher » 2008-10-15 13:33:24

RusBiT писал(а):Система не определяет HDD SATA 750Gb Seagate <ST3750330NS>, в dmesg ничего нету.
В биосе распаздается.Подскажите куда копать :smile:
Продемонстрируйте:

Код: Выделить всё

# pciconf -l | egrep "class=0x01"
Если в этом списке нет устройств none@, то загрузите систему в режиме "verbose boot" и покажите /var/run/dmesg.boot
нет ничего невозможного

Аватара пользователя
RusBiT
лейтенант
Сообщения: 635
Зарегистрирован: 2007-08-03 11:43:53
Откуда: Красноярск
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение RusBiT » 2008-10-15 15:37:40

Код: Выделить всё

#  pciconf -l | egrep "class=0x01"
atapci1@pci0:0:17:0:	class=0x01018f card=0x82ef1043 chip=0x43901002 rev=0x00 hdr=0x00
atapci2@pci0:0:20:1:	class=0x01018a card=0x82ef1043 chip=0x439c1002 rev=0x00 hdr=0x00
atapci0@pci0:2:0:0:	class=0x010400 card=0x71321095 chip=0x31321095 rev=0x01 hdr=0x00
На мат.плате 6 sata + контроллер на 2 sata (SiI SiI 3132 SATA300 controller). Винт подключен к мат.плате. Остальные hdd нормально определяются.

Код: Выделить всё

ad0: 305245MB <Seagate ST3320620A 3.AAC> at ata0-master UDMA100
ad1: 305245MB <Seagate ST3320620A 3.AAC> at ata0-slave UDMA100
ad4: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata2-master SATA300
ad6: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata3-master SATA300
ad8: 476940MB <SAMSUNG HD501LJ CR100-10> at ata4-master UDMA33
ad9: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata4-slave UDMA33
ad10: 476940MB <SAMSUNG HD501LJ CR100-10> at ata5-master UDMA33
ad11: 476940MB <Hitachi HDT725050VLA360 V56OA7EA> at ata5-slave UDMA33
В verbose boot пока не могу зайти, удаленно сижу
Чем больше я познаю FreeBSD, тем больше я считаю себя ламером :)

bu7cher
сержант
Сообщения: 220
Зарегистрирован: 2008-02-21 18:28:55
Откуда: Киров
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение bu7cher » 2008-10-16 7:14:37

RusBiT писал(а): В verbose boot пока не могу зайти, удаленно сижу

Код: Выделить всё

# echo 'boot_verbose="YES"' >> /boot/loader.conf
# shutdown -r now
нет ничего невозможного

Аватара пользователя
RusBiT
лейтенант
Сообщения: 635
Зарегистрирован: 2007-08-03 11:43:53
Откуда: Красноярск
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение RusBiT » 2008-10-16 12:11:07

Код: Выделить всё

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC1 #0: Mon Dec 24 12:18:24 UTC 2007
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d93000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d93188.
Calibrating clock(s) ... i8254 clock: 1190206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000820841 Hz
CPU: AMD Athlon(tm) 64 Processor 3200+ (2000.82-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 402259968 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000001789dfff, 377970688 bytes (92278 pages)
avail memory = 379637760 (362 MB)
Table 'FACP' at 0x17fa0200
Table 'APIC' at 0x17fa0390
MADT: Found table at 0x17fa0390
MP Configuration Table version 1.4 found at 0xc00e3e40
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
ACPI APIC Table: <042208 APIC1438>
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5000
pnpbios: Entry = f0000:67ca  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
ACPI: RSDP @ 0x0xfb500/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0x17fa0000/0x003C (v  1 042208 RSDT1438 0x20080422 MSFT 0x00000097)
ACPI: FACP @ 0x0x17fa0200/0x0084 (v  1 042208 FACP1438 0x20080422 MSFT 0x00000097)
ACPI: DSDT @ 0x0x17fa05c0/0x6DFD (v  1  A0896 A0896001 0x00000001 INTL 0x20051117)
ACPI: FACS @ 0x0x17fae000/0x0040
ACPI: APIC @ 0x0x17fa0390/0x006C (v  1 042208 APIC1438 0x20080422 MSFT 0x00000097)
ACPI: MCFG @ 0x0x17fa0400/0x003C (v  1 042208 OEMMCFG  0x20080422 MSFT 0x00000097)
ACPI: OEMB @ 0x0x17fae040/0x0071 (v  1 042208 OEMB1438 0x20080422 MSFT 0x00000097)
ACPI: HPET @ 0x0x17fa73c0/0x0038 (v  1 042208 OEMHPET  0x20080422 MSFT 0x00000097)
ACPI: SSDT @ 0x0x17fa7400/0x00F4 (v  1 A_M_I_ POWERNOW 0x00000001 AMD  0x00000001)
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC1 #0: Mon Dec 24 12:18:24 UTC 2007
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0d93000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0d93188.
Calibrating clock(s) ... i8254 clock: 1190206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000820841 Hz
CPU: AMD Athlon(tm) 64 Processor 3200+ (2000.82-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 402259968 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001028000 - 0x000000001789dfff, 377970688 bytes (92278 pages)
avail memory = 379637760 (362 MB)
Table 'FACP' at 0x17fa0200
Table 'APIC' at 0x17fa0390
MADT: Found table at 0x17fa0390
MP Configuration Table version 1.4 found at 0xc00e3e40
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
ACPI APIC Table: <042208 APIC1438>
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5000
pnpbios: Entry = f0000:67ca  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
ACPI: RSDP @ 0x0xfb500/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0x17fa0000/0x003C (v  1 042208 RSDT1438 0x20080422 MSFT 0x00000097)
ACPI: FACP @ 0x0x17fa0200/0x0084 (v  1 042208 FACP1438 0x20080422 MSFT 0x00000097)
ACPI: DSDT @ 0x0x17fa05c0/0x6DFD (v  1  A0896 A0896001 0x00000001 INTL 0x20051117)
ACPI: FACS @ 0x0x17fae000/0x0040
ACPI: APIC @ 0x0x17fa0390/0x006C (v  1 042208 APIC1438 0x20080422 MSFT 0x00000097)
ACPI: MCFG @ 0x0x17fa0400/0x003C (v  1 042208 OEMMCFG  0x20080422 MSFT 0x00000097)
ACPI: OEMB @ 0x0x17fae040/0x0071 (v  1 042208 OEMB1438 0x20080422 MSFT 0x00000097)
ACPI: HPET @ 0x0x17fa73c0/0x0038 (v  1 042208 OEMHPET  0x20080422 MSFT 0x00000097)
ACPI: SSDT @ 0x0x17fa7400/0x00F4 (v  1 A_M_I_ POWERNOW 0x00000001 AMD  0x00000001)
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 12 14 15
  Validation          0  255   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  4 7 10 11 12 14 15
  Validation          0   10   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 7 10 11 12 14 15
  Validation          0  255   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 4 hz: 14318180 opts: leg_route
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9600, revid=0x00
        domain=0, bus=0, slot=0, func=0
        class=06-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1043, dev=0x9602, revid=0x00
        domain=0, bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9604, revid=0x00
        domain=0, bus=0, slot=4, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x1022, dev=0x9606, revid=0x00
        domain=0, bus=0, slot=6, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D3  current D0
        MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4390, revid=0x00
        domain=0, bus=0, slot=17, func=0
        class=01-01-8f, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base 0xa000, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x9000, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x8000, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x7000, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x6000, size  4, enabled
        map[24]: type Memory, range 32, base 0xfbaff800, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4385, revid=0x3a
        domain=0, bus=0, slot=20, func=0
        class=0c-05-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0403, statreg=0x9230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
        domain=0, bus=0, slot=20, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=0
        cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=255
        MSI supports 2 messages
        map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
found-> vendor=0x1002, dev=0x439d, revid=0x00
        domain=0, bus=0, slot=20, func=3
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
        domain=0, bus=0, slot=20, func=4
        class=06-04-01, hdrtype=0x01, mfdev=1
        cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        domain=0, bus=0, slot=24, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        domain=0, bus=0, slot=24, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        domain=0, bus=0, slot=24, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        domain=0, bus=0, slot=24, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xb000-0xbfff
pcib1:   memory decode     0xfbb00000-0xfbcfffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9610, revid=0x00
        domain=0, bus=1, slot=5, func=0
        class=03-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled
pcib1: requested memory range 0xf0000000-0xf7ffffff: good
        map[14]: type I/O Port, range 32, base 0xb000, size  8, enabled
pcib1: requested I/O range 0xb000-0xb0ff: in range
        map[18]: type Memory, range 32, base 0xfbcf0000, size 16, enabled
pcib1: requested memory range 0xfbcf0000-0xfbcfffff: good
        map[24]: type Memory, range 32, base 0xfbb00000, size 20, enabled
pcib1: requested memory range 0xfbb00000-0xfbbfffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xf0000000-0xf7ffffff,0xfbcf0000-0xfbcfffff,0xfbb00000-0xfbbfffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xfbd00000-0xfbdfffff
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x1095, dev=0x3132, revid=0x01
        domain=0, bus=2, slot=0, func=0
        class=01-04-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type Memory, range 64, base 0xfbdffc00, size  7, enabled
pcib2: requested memory range 0xfbdffc00-0xfbdffc7f: good
        map[18]: type Memory, range 64, base 0xfbdf8000, size 14, enabled
pcib2: requested memory range 0xfbdf8000-0xfbdfbfff: good
        map[20]: type I/O Port, range 32, base 0xcc00, size  7, enabled
pcib2: requested I/O range 0xcc00-0xcc7f: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
atapci0: <SiI SiI 3132 SATA300 controller> port 0xcc00-0xcc7f mem 0xfbdffc00-0xfbdffc7f,0xfbdf8000-0xfbdfbfff irq 16 at device 0.0 on pci2
atapci0: Reserved 0x80 bytes for rid 0x20 type 4 at 0xcc00
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x80 bytes for rid 0x10 type 3 at 0xfbdffc00
atapci0: Reserved 0x4000 bytes for rid 0x18 type 3 at 0xfbdf8000
ata2: <ATA channel 0> on atapci0
ata2: channel HW reset time=0ms
ata2: SATA connect time=0ms
ata2: soft reset exec time=26ms status=00050000
ata2: SIGNATURE=00000101
ata2: siiprb_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: channel HW reset time=0ms
ata3: SATA connect time=0ms
ata3: soft reset exec time=26ms status=00050000
ata3: SIGNATURE=00000101
ata3: siiprb_reset devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xd000-0xdfff
pcib3:   memory decode     0xfbe00000-0xfbefffff
pcib3:   prefetched decode 0xfaf00000-0xfaffffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x10ec, dev=0x8168, revid=0x02
        domain=0, bus=3, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        MSI-X supports 2 messages in map 0x20
        map[10]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib3: requested I/O range 0xd800-0xd8ff: in range
        map[18]: type Memory, range 64, base 0xfbeff000, size 12, enabled
pcib3: requested memory range 0xfbeff000-0xfbefffff: good
        map[20]: type Prefetchable Memory, range 64, base 0xfaff0000, size 16, enabled
pcib3: requested memory range 0xfaff0000-0xfaffffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcib3: re0 requested I/O range 0xd800-0xd8ff: in range
pcib3: re0 requested I/O range 0xd800-0xd8ff: in range
pci3: <network, ethernet> at device 0.0 (no driver attached)
atapci1: <ATI ATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfbaff800-0xfbaffbff irq 22 at device 17.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xa000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x9000
ata4: reset tp1 mask=03 ostat0=50 ostat1=50
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x7000
ata5: reset tp1 mask=03 ostat0=50 ostat1=50
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata5: [MPSAFE]
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xe000-0xefff
pcib4:   memory decode     0xfbf00000-0xfbffffff
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x1106, dev=0x3106, revid=0x8b
        domain=0, bus=4, slot=6, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib4: requested I/O range 0xe800-0xe8ff: in range
        map[14]: type Memory, range 32, base 0xfbfffc00, size  8, enabled
pcib4: requested memory range 0xfbfffc00-0xfbfffcff: good
pcib4: matched entry for 4.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem 0xfbfffc00-0xfbfffcff irq 20 at device 6.0 on pci4
vr0: Quirks: 0x0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x004063, model 0x0034, rev. 9
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: using obsoleted if_watchdog interface
vr0: bpf attached
vr0: Ethernet address: 00:1e:58:45:85:61
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52
vr0: [MPSAFE]
vr0: [ITHREAD]
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 53
fdc0: [FILTER]
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xd0000-0xd3fff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 56
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100041052 hz
Timecounter "TSC" frequency 2000820841 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
rr232x: no controller detected.
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on IXP700 chip
ad0: setting UDMA100 on IXP700 chip
ad0: 305245MB <Seagate ST3320620A 3.AAC> at ata0-master UDMA100
ad0: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: Silicon Image check3 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting PIO4 on IXP700 chip
ad1: setting UDMA100 on IXP700 chip
ad1: 305245MB <Seagate ST3320620A 3.AAC> at ata0-slave UDMA100
ad1: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
ad1: Silicon Image check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
GEOM: new disk ad0
GEOM: new disk ad1
ad4: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata3-master SATA300
ad6: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: Silicon Image check3 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ata4-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad8: 476940MB <SAMSUNG HD501LJ CR100-10> at ata4-master UDMA33
ad8: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad8: Silicon Image check3 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ad9: 476940MB <Hitachi HDT725050VLA380 V56OA7EA> at ata4-slave UDMA33
ad9: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad9: Silicon Image check3 failed
ad9: Adaptec check1 failed
ad9: LSI (v3) check1 failed
ad9: LSI (v2) check1 failed
ad9: FreeBSD check1 failed
GEOM: new disk ad6
GEOM: new disk ad8
ata5-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 476940MB <SAMSUNG HD501LJ CR100-10> at ata5-master UDMA33
ad10: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad10: Silicon Image check3 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ad11: 476940MB <Hitachi HDT725050VLA360 V56OA7EA> at ata5-slave UDMA33
ad11: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad9
ad11: Silicon Image check3 failed
ad11: Adaptec check1 failed
ad11: LSI (v3) check1 failed
ad11: LSI (v2) check1 failed
ad11: FreeBSD check1 failed
ATA PseudoRAID loaded
GEOM: new disk ad10
GEOM: new disk ad11
Trying to mount root from ufs:/dev/ad9s1a
start_init: trying /sbin/init
Чем больше я познаю FreeBSD, тем больше я считаю себя ламером :)

bu7cher
сержант
Сообщения: 220
Зарегистрирован: 2008-02-21 18:28:55
Откуда: Киров
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение bu7cher » 2008-10-16 12:28:48

RusBiT писал(а):

Код: Выделить всё

 
found-> vendor=0x1002, dev=0x4390, revid=0x00
        domain=0, bus=0, slot=17, func=0
        class=01-01-8f, hdrtype=0x00, mfdev=0
        cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 4 messages, 64 bit
        map[10]: type I/O Port, range 32, base 0xa000, size  3, enabled
        map[14]: type I/O Port, range 32, base 0x9000, size  2, enabled
        map[18]: type I/O Port, range 32, base 0x8000, size  3, enabled
        map[1c]: type I/O Port, range 32, base 0x7000, size  2, enabled
        map[20]: type I/O Port, range 32, base 0x6000, size  4, enabled
        map[24]: type Memory, range 32, base 0xfbaff800, size 10, enabled
atapci1: <ATI ATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfbaff800-0xfbaffbff irq 22 at device 17.0 on pci0
Варианта 2:
1. Вам надо обновить систему или драйвер ata(4). Ваш контроллер определяется как GENERIC IDE и в этом режиме может работать только с 4 SATA портами, эмулируя их как PATA.
2. Если в BIOS есть возможность включения режима AHCI, то включить его, возможно контроллер определится как GENERIC AHCI.
нет ничего невозможного

Аватара пользователя
RusBiT
лейтенант
Сообщения: 635
Зарегистрирован: 2007-08-03 11:43:53
Откуда: Красноярск
Контактная информация:

Re: Не видет HDD SATA 750Gb Seagate <ST3750330NS>

Непрочитанное сообщение RusBiT » 2008-10-16 18:35:29

Ок. Я тоже как раз про это и думал. Сегодня загрузил Ubuntu 8.10 Live Cd , все hdd распознались нормально.
Завтра попробую 7.1 beta
Чем больше я познаю FreeBSD, тем больше я считаю себя ламером :)