Подключение доп. диска к аппаратному RAID0 под FreeBSD

Решение проблем связванных с работой железа. Проблемы программно-аппаратной совместимости.
Правила форума
Убедительная просьба юзать теги [code] при оформлении листингов.
Сообщения не оформленные должным образом имеют все шансы быть незамеченными.
sagedima
проходил мимо
Сообщения: 4
Зарегистрирован: 2013-04-19 9:43:01

Подключение доп. диска к аппаратному RAID0 под FreeBSD

Непрочитанное сообщение sagedima » 2013-04-19 9:58:12

Добрый день, уважаемые форумчане!
Надеюсь среди нас много администраторов и кто-нибудь сможет мне помочь.
Пролема такая: Имеется сервер с RAID0 (2 диска по 250Gb, 2ой зеркало). Подключили к рейду еще один диск 1Tb. Хотелось бы его сделать одиночным и использовать. В системе он не определяется, т.е. в /dev/ его попросту нету. Зато RAID контроллер его видит. Он находится в состоянии Unconf(Good). Что сделать чтобы он начал определяться в системе?

Вот общая информация по железу:

А) Версия FreeBSD

Код: Выделить всё

FreeBSD http://www.**********.ru 8.2-RELEASE-p6 FreeBSD 8.2-RELEASE-p6 #0: Mon Jan 16 22:21:05 MSK 2012     root@web.********.ru:/usr/obj/usr/src/sys/********  amd64
Б) Вывод DMESG:

Код: Выделить всё

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE-p6 #0: Mon Jan 16 22:21:05 MSK 2012
    root@web.*********.ru:/usr/obj/usr/src/sys/************ amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz (2407.30-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 6  Model = 2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 8594128896 (8196 MB)
avail memory = 8232882176 (7851 MB)
ACPI APIC Table: <082711 APIC1638>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID: 16
 cpu3 (AP): APIC ID: 17
 cpu4 (AP): APIC ID: 18
 cpu5 (AP): APIC ID: 19
 cpu6 (AP): APIC ID: 20
 cpu7 (AP): APIC ID: 21
 cpu8 (AP): APIC ID: 32
 cpu9 (AP): APIC ID: 33
 cpu10 (AP): APIC ID: 48
 cpu11 (AP): APIC ID: 49
 cpu12 (AP): APIC ID: 50
 cpu13 (AP): APIC ID: 51
 cpu14 (AP): APIC ID: 52
 cpu15 (AP): APIC ID: 53
ioapic0: Changing APIC ID to 6
ioapic1: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 400, 100 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0xEA, should be 0xE7 (20101013/tbutils-354)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0xdc00-0xdc1f mem 0xfbce0000-0xfbcfffff,0xfbcc0000-0xfbcdffff,0xfbc9c000-0xfbc9ffff irq 28 at device 0.0 on pci1
igb0: Using MSIX interrupts with 9 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:25:90:61:27:48
igb1: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0xd880-0xd89f mem 0xfbc60000-0xfbc7ffff,0xfbc40000-0xfbc5ffff,0xfbc1c000-0xfbc1ffff irq 40 at device 0.1 on pci1
igb1: Using MSIX interrupts with 9 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:25:90:61:27:49
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
mfi0: <LSI MegaSAS Gen2> port 0xe000-0xe0ff mem 0xfbd9c000-0xfbd9ffff,0xfbdc0000-0xfbdfffff irq 32 at device 0.0 on pci5
mfi0: Megaraid SAS driver Ver 3.00 
mfi0: 8022 (419530561s/0x0020/info) - Shutdown command received from host
mfi0: 8023 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/9260/1000)
mfi0: 8024 (boot + 4s/0x0020/info) - Firmware version 2.120.183-1415
mfi0: 8025 (boot + 5s/0x0020/info) - Package version 12.12.0-0073
mfi0: 8026 (boot + 5s/0x0020/info) - Board Revision 61A
mfi0: 8027 (boot + 30s/0x0002/info) - Inserted: PD 04(e0xff/s1)
mfi0: 8028 (boot + 30s/0x0002/info) - Inserted: PD 04(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=5000cca01f333bb9,0000000000000000
mfi0: 8029 (boot + 30s/0x0002/info) - Inserted: PD 05(e0xff/s0)
mfi0: 8030 (boot + 30s/0x0002/info) - Inserted: PD 05(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000cca01f33cd15,0000000000000000
mfi0: 8031 (boot + 30s/0x0002/info) - Inserted: PD 06(e0xff/s2)
mfi0: 8032 (boot + 30s/0x0002/info) - Inserted: PD 06(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=4433221101000000,0000000000000000
mfi0: 8033 (419534269s/0x0020/info) - Time established as 04/17/13 17:17:49; (83 seconds since power on)
mfi0: [ITHREAD]
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xcc00-0xcc1f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc880-0xc89f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xc800-0xc81f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfbeda000-0xfbeda3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc480-0xc49f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc400-0xc41f irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc080-0xc09f irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfbed8000-0xfbed83ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfaffc000-0xfaffffff,0xfb000000-0xfb7fffff irq 18 at device 1.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib7: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib7
pcib8: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib8
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDROM <DV-28S-V/1.0B> at ata5-master UDMA100 SATA 1.5Gb/s
mfi0: 8034 (419534311s/0x0020/info) - Host driver is loaded and operational
mfid0: <MFI Logical Disk> on mfi0
mfid0: 285632MB (584974336 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #10 Launched!
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/mfid0s1a
ugen1.2: <American Megatrends Inc.> at usbus1
ukbd0: <Keyboard Interface> on usbus1
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus1
igb0: link state changed to UP
mfi0: 8035 (419536366s/0x0002/info) - Power state change on PD 06(e0xfc/s2) from ON(0) to POWERSAVE(1)
mfi0: 8036 (419617804s/0x0002/info) - Clear started on PD 06(e0xfc/s2)
mfi0: 8037 (419617804s/0x0002/info) - Power state change on PD 06(e0xfc/s2) from POWERSAVE(1) to TRANSITION(ff)
mfi0: 8038 (419617814s/0x0002/info) - Power state change on PD 06(e0xfc/s2) from TRANSITION(ff) to ON(0)
mfi0: IOCTL 0x40086481 not handled
mfi0: 8040 (419620782s/0x0002/WARN) - Command timeout on PD 06(e0xfc/s2) Path 4433221101000000, CDB: 03 00 00 00 40 00
mfi0: 8041 (419620782s/0x0002/WARN) - PD 06(e0xfc/s2) Path 4433221101000000  reset (Type 03)
mfi0: 8042 (419621124s/0x0002/WARN) - Command timeout on PD 06(e0xfc/s2) Path 4433221101000000, CDB: 03 00 00 00 40 00
mfi0: 8043 (419621124s/0x0002/WARN) - PD 06(e0xfc/s2) Path 4433221101000000  reset (Type 03)
В) Вывод df -h

Код: Выделить всё

Filesystem       Size    Used   Avail Capacity  Mounted on
/dev/mfid0s1a    1.9G    697M    1.1G    38%    /
devfs            1.0K    1.0K      0B   100%    /dev
/dev/mfid0s1d    2.9G     36K    2.7G     0%    /tmp
/dev/mfid0s1f    226G     13G    194G     6%    /usr
/dev/mfid0s1e     24G    673M     22G     3%    /var
linprocfs        4.0K    4.0K      0B   100%    /usr/compat/linux/proc
linsysfs         4.0K    4.0K      0B   100%    /usr/compat/linux/sys
г) Вывод утилиты MegaCLI (информация от RAID контроллера)

Код: Выделить всё

Adapter #0

Enclosure Device ID: 252
Slot Number: 0
Device Id: 5
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 286168MB [0x22eec130 Sectors]
Non Coerced Size: 285656MB [0x22dec130 Sectors]
Coerced Size: 285632MB [0x22de0000 Sectors]
Firmware state: Online
SAS Address(0): 0x5000cca01f33cd15
SAS Address(1): 0x0
Connected Port Number: 1(path0) 
Inquiry Data: HITACHI HUS156030VLS600 A5D0J0VXH4RN            
Foreign State: None 
Media Type: Hard Disk Device
Device Speed: Unknown 
Link Speed: Unknown 

Enclosure Device ID: 252
Slot Number: 1
Device Id: 4
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 286168MB [0x22eec130 Sectors]
Non Coerced Size: 285656MB [0x22dec130 Sectors]
Coerced Size: 285632MB [0x22de0000 Sectors]
Firmware state: Online
SAS Address(0): 0x5000cca01f333bb9
SAS Address(1): 0x0
Connected Port Number: 0(path0) 
Inquiry Data: HITACHI HUS156030VLS600 A5D0J0VX5GMN            
Foreign State: None 
Media Type: Hard Disk Device
Device Speed: Unknown 
Link Speed: Unknown 

Enclosure Device ID: 252
Slot Number: 2
Device Id: 6
Sequence Number: 1
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SATA
Raw Size: 1907729MB [0xe8e088b0 Sectors]
Non Coerced Size: 1907217MB [0xe8d088b0 Sectors]
Coerced Size: 1907200MB [0xe8d00000 Sectors]
Firmware state: Unconfigured(good)
SAS Address(0): 0x4433221101000000
Connected Port Number: 2(path0) 
Inquiry Data: ATA     ST2000VX000-1CU1CV22            W1E3BF3H
Foreign State: None 
Media Type: Hard Disk Device
Device Speed: Unknown 
Link Speed: Unknown 


Exit Code: 0x00
Заранее, спасибо!

Хостинговая компания Host-Food.ru
Хостинг HostFood.ru
 

Услуги хостинговой компании Host-Food.ru

Хостинг HostFood.ru

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

Аватара пользователя
vadim64
майор
Сообщения: 2098
Зарегистрирован: 2009-09-17 15:15:26
Откуда: Засратовец

Re: Подключение доп. диска к аппаратному RAID0 под FreeBSD

Непрочитанное сообщение vadim64 » 2013-04-22 14:31:43

варианта 2
1. подключить его к порту контроллера, который не в раид-группе
1а. если есть порты на матери, подключите винт туда, то есть мимо контроллера
2. настроить винт в контроллере
Люди не делятся на национальности, партии, фракции и религии. Люди делятся на умных и дураков, а вот дураки делятся на национальности, партии, фракции и религии.

sagedima
проходил мимо
Сообщения: 4
Зарегистрирован: 2013-04-19 9:43:01

Re: Подключение доп. диска к аппаратному RAID0 под FreeBSD

Непрочитанное сообщение sagedima » 2013-04-22 16:47:10

Спасибо за столь развернутый ответ.

Проблему решили таким образом: Используя MegaCLI, сделали следующее:

Код: Выделить всё

megacli -CfgLdAdd -r0[252:2] -a0
Просто добавили в рейд0. Правда есть нюанс: почему то после монтирования, выскочила табличка: mfid1 Hard Error: Cannot dump. mfi0 I/O error
и так далее. Естественно дамп коры и всего прочего не сохранился так как записать на диск он не смог.
В чем может быть дело?)


sagedima
проходил мимо
Сообщения: 4
Зарегистрирован: 2013-04-19 9:43:01

Re: Подключение доп. диска к аппаратному RAID0 под FreeBSD

Непрочитанное сообщение sagedima » 2013-04-23 1:16:13

Если можно по подробнее. Было бы здорово увидеть сами команды и описание что произойдет если сделать так то...
Заранее, спасибо!