Помогите установить стриммер Ultrium230

[kertio]

Сабж... Ни как не могу установить и настроить этот стриммер.. весь инет перерыл, помогите плиз...

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Div]

А в чем проблема-то?
У меня Ultrium 960 и работает без проблем уж лет 5 как...
На каком контролере сидит 230?

[kertio]

он подсоединен не к слоту на материнской карте а к контроллеру Initio INIC-1060P

[Div]

Воооо... скорее всего отсюда и надо танцевать... А программка работы с устройством (в основном) - это стандартная mt и такие как tаr, cpio и т.д....
Посмотрите в листе совместимости с Фрии - есть такой контролер??? Ну и далее гуглить или - кто сталкивался с этим

[Alex Keda]

Код: Выделить всё

pciconf -lv
dmesg

[kertio]

такой контроллер есть, я весь инет перерыл но так и не смог найти почему он не цепляется к системе.

Код: Выделить всё

# pciconf -lv
hostb0@pci0:0:0:0:      class=0x060000 card=0x25601458 chip=0x25608086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'DRAM Controller / Host-Hub I/F Bridge (82845G/GL/GV/GE/PE)'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x25621458 chip=0x25628086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82845G/GL/GV/GE/PE Integrated Graphics Device'
    class      = display
    subclass   = VGA
uhci0@pci0:0:29:0:      class=0x0c0300 card=0x24c21458 chip=0x24c28086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller *1'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:      class=0x0c0300 card=0x24c21458 chip=0x24c48086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller *2'
    class      = serial bus
    subclass   = USB
uhci2@pci0:0:29:2:      class=0x0c0300 card=0x24c21458 chip=0x24c78086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller *3'
    class      = serial bus
    subclass   = USB
ehci0@pci0:0:29:7:      class=0x0c0320 card=0x50041458 chip=0x24cd8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib1@pci0:0:30:0:      class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:      class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:    class=0x01018a card=0x24c21458 chip=0x24cb8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL (ICH4/ICH4-L) UltraATA/100 EIDE Controller'
    class      = mass storage
    subclass   = ATA
none0@pci0:0:31:3:      class=0x0c0500 card=0x24c21458 chip=0x24c38086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
none1@pci0:0:31:5:      class=0x040100 card=0xa0021458 chip=0x24c58086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Realtek AC97 Audio (82801DBM SoundMAXController (ICH4-M B0 step))'
    class      = multimedia
    subclass   = audio
ath0@pci0:1:0:0:        class=0x020000 card=0x3a731186 chip=0x0013168c rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    device     = '802.11a/b/g Wireless Adapter (AR2312)'
    class      = network
    subclass   = ethernet
none2@pci0:1:2:0:       class=0x010000 card=0x10601101 chip=0x10601101 rev=0x01 hdr=0x00
    vendor     = 'Initio Corporation'
    device     = 'Orchid Ultra-2 SCSI Controller (INI-A100U2W)'
    class      = mass storage
    subclass   = SCSI
rl0@pci0:1:5:0: class=0x020000 card=0xe0001458 chip=0x813910ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    device     = 'Realtek RTL8139 Family PCI Fast Ethernet NIC (RTL-8139/8139C/8139D)'
    class      = network
    subclass   = ethernet

Код: Выделить всё

dmesg
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE-201009 #0: Wed Oct  6 14:40:28 UTC 2010
    kertio@FreeBSD.home:/usr/src/sys/i386/compile/MYKERNEL i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz (1615.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf12  Family = f  Model = 1  Stepping = 2
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 1073741824 (1024 MB)
avail memory = 1028067328 (980 MB)
ACPI APIC Table: <GBT    AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f6f0000 (3) failed
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40bf on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 0xd8000000-0xdfffffff,0xe2000000-0xe207ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82845M (845M GMCH) SVGA controller> on vgapci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe2080000-0xe20803ff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ath0: <Atheros 5212> mem 0xe1000000-0xe100ffff irq 18 at device 0.0 on pci1
ath0: [ITHREAD]
ath0: AR2413 mac 7.9 RF2413 phy 4.5
pci1: <mass storage, SCSI> at device 2.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xe1011000-0xe10110ff irq 21 at device 5.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0f:ea:4b:20:0e
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xd3fff,0xd4000-0xd7fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1615920072 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad0: 76318MB <MAXTOR STM380215A 3.AAD> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: DVDR <Optiarc DVD RW AD-7200A/1.05> at ata1-master UDMA66
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP

[FiL]

pci1: <mass storage, SCSI> at device 2.0 (no driver attached)

не к добру...

[kertio]

то-то и оно... это меня совсем не радует. а очень хотелось бы установить. может его как-нибудь в ручную можно добавить? я где-то читал, для другого устройства, например сетевого, можно куда-то в исходники ядра добавить адреса памяти устройства и собрать ядро, тогда оно автоматически цепляется... только как и куда я не помню. может быть таким макаром пройдет?

[bu7cher]

Код: Выделить всё

none2@pci0:1:2:0:       class=0x010000 card=0x10601101 chip=0x10601101 rev=0x01 hdr=0x00
    vendor     = 'Initio Corporation'
    device     = 'Orchid Ultra-2 SCSI Controller (INI-A100U2W)'
    class      = mass storage
    subclass   = SCSI

Для этого контроллера нет драйвера. В линуксе он называется "Initio A100U2W SCSI driver".

[bu7cher]

Хотя, гугл нашёл это. Вероятно елси немного постараться и подрихтовать этот драйвер, то удастся завести его на 8-ке.