Код: Выделить всё
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Tue Apr 8 03:26:42 MSD 2008
root@mx.xxxx.ru:/usr/obj/usr/src/sys/GENERIC.my
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA C7 Esther+RNG+AES+AES-CTR+SHA1+SHA256+RSA (997.44-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x6a9 Stepping = 9
Features=0xa7c9baff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x181<SSE3,EST,TM2>
real memory = 469434368 (447 MB)
avail memory = 445411328 (424 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Apr 8 2008 03:25:33)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1bf00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA VT3324 (CX700) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xa0000000-0xbfffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
atapci0: <VIA ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 20 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe880-0xe89f irq 22 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 23 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
axe0: <vendor 0x0b95 product 0x7720, class 255/255, rev 2.00/0.01, addr 2> on uhub3
axe0: AX88772, bufsz 1536, boundary 64
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: using obsoleted if_watchdog interface
axe0: Ethernet address: 00:50:b6:00:a8:7a
axe0: if_start running deferred for Giant
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <multimedia> at device 1.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd800-0xd8ff mem 0xfeaffc00-0xfeaffcff irq 18 at device 8.0 on pci3
vr0: Quirks: 0x0
miibus1: <MII bus> on vr0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: using obsoleted if_watchdog interface
vr0: Ethernet address: 00:40:63:f1:6c:13
vr0: [ITHREAD]
vr1: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfeaff800-0xfeaff8ff irq 19 at device 9.0 on pci3
vr1: Quirks: 0x0
miibus2: <MII bus> on vr1
ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: using obsoleted if_watchdog interface
vr1: Ethernet address: 00:40:63:f1:6c:12
vr1: [ITHREAD]
ath0: <Atheros 5212> mem 0xfeae0000-0xfeaeffff irq 17 at device 15.0 on pci3
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:1b:11:09:e1:d4
ath0: mac 7.9 phy 4.5 radio 5.6
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: <16550A-compatible COM port> port 0xa80-0xa87 irq 3 on acpi0
sio2: type 16550A
sio3: configured irq 3 not in bitmap of probed irqs 0
sio3: port may not be enabled
sio3: configured irq 3 not in bitmap of probed irqs 0
sio3: port may not be enabled
sio3: <16550A-compatible COM port> port 0xa88-0xa8f irq 3 on acpi0
sio3: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd1800-0xd37ff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <APC Back-UPS ES 700 FW:829.D2 .I USB FW:D2, class 0/0, rev 1.10/1.06, addr 2> on uhub1
ums0: <vendor 0x15d9 USB Mouse, class 0/0, rev 1.10/1.00, addr 3> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 997444199 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
hptrr: no controller detected.
ad0: 238475MB <Seagate ST3250410AS 3.AAA> at ata0-master UDMA33
acd0: DVDR <Optiarc DVD RW AD-7633A/1.00> at ata1-master UDMA33
GEOM_LABEL: Label for provider ad0s3 is msdosfs/asr.
Trying to mount root from ufs:/dev/ad0s1a
arplookup 10.10.250.1 failed: host is not on local network
arplookup 10.10.250.1 failed: host is not on local network
arplookup 10.10.250.1 failed: host is not on local network
arplookup 10.10.250.1 failed: host is not on local network
arplookup 10.10.250.1 failed: host is not on local network
arplookup 10.10.250.1 failed: host is not on local network
Код: Выделить всё
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 addr 2: low speed, power 2 mA, config 1, Back-UPS ES 700 FW:829.D2 .I USB FW:D2(0x0002), APC(0x051d), rev 1.06
port 2 addr 3: low speed, power 100 mA, config 1, USB Mouse(0x0a33), vendor 0x15d9(0x15d9), rev 1.00
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 250 mA, config 1, product 0x7720(0x7720), vendor 0x0b95(0x0b95), rev 0.01
Заодно вопрос:
Откуда это и как избавиться?
Код: Выделить всё
arplookup 10.10.250.1 failed: host is not on local network
dns провайдера 10.20.6.254, а сам мой IP внешний. Внутренняя сеть 192.168.100.0/24
(с)
