Подскажите как создать раздел
Код: Выделить всё
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 60704 487500457+ 83 Linux
/dev/sda3 60705 60801 779152+ 82 Linux swap / Solaris
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 19457 156288321 83 Linux
Disk /dev/sdc: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/sdd: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
#Код: Выделить всё
# fdisk /dev/sdb
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-19457, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-19457, default 19457):
Using default value 19457
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
#Код: Выделить всё
# mkfs.ext3 -L /disk2 /dev/sdb
mke2fs 1.39 (29-May-2006)
/dev/sdb is entire device, not just one partition!
Proceed anyway? (y,n) y
/dev/sdb is apparently in use by the system; will not make a filesystem here!
#
Спасибо заранее.
