Есть один сервер, на котором нужно настроить igmpproxy, em0 - внешний интерфейс, em1 - внутренний.
В /boot/loader.conf указал
Код: Выделить всё
ip_mroute_load="YES"
Код: Выделить всё
##------------------------------------------------------
## Enable Quickleave mode (Sends Leave instantly)
##------------------------------------------------------
quickleave
##------------------------------------------------------
## Configuration for eth0 (Upstream Interface)
##------------------------------------------------------
phyint em0 upstream ratelimit 0 threshold 1
altnet 10.0.0.0/8
altnet 86.0.0.0/8
##------------------------------------------------------
## Configuration for eth1 (Downstream Interface)
##------------------------------------------------------
phyint em1 downstream ratelimit 0 threshold 1
##------------------------------------------------------
## Configuration for eth2 (Disabled Interface)
##------------------------------------------------------
phyint msk0 disabled
phyint lo0 disabled
phyint ipfw0 disabled
Код: Выделить всё
00200 0 0 allow udp from any to 239.0.0.0/8 via em1
00300 0 0 allow igmp from any to 224.0.0.0/8 via em1
19:24:54.381051 IP 89.208.168.17 > all-systems.mcast.net: igmp query v2
19:25:54.410495 IP 89.208.168.17 > all-systems.mcast.net: igmp query v2
19:26:26.679554 IP 192.168.13.3 > all-systems.mcast.net: igmp query v2
19:26:54.379598 IP 89.208.168.17 > all-systems.mcast.net: igmp query v2
19:27:54.380183 IP 89.208.168.17 > all-systems.mcast.net: igmp query v2
19:28:31.838011 IP 192.168.13.3 > all-systems.mcast.net: igmp query v2
19:28:54.380768 IP 89.208.168.17 > all-systems.mcast.net: igmp query v2
В чем может быть причина?