Я так понимаю что в 7 ветке все именно на PAM замешано вот только как это грамогтно настроить? МАНы скудны инфой.
Код: Выделить всё
[15:29]/root #dmesg -a
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Sep 21 04:48:34 UTC 2008
root@KOTIK.kolatelecom.ru:/usr/obj/usr/src/sys/KOTIK_KERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 1340932096 (1278 MB)
avail memory = 1299673088 (1239 MB)
ACPI APIC Table: <INTEL ALVISO >
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xa0000000-0xa0ffffff,0xc0000000-0xc7fffff
f,0x90000000-0x90ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce Go 6200> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f
irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f
irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f
irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0x80000000-0x800003ff irq 2
3 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pci6: <network> at device 5.0 (no driver attached)
re0: <RealTek 8169SB/8110SB Single-chip Gigabit Ethernet> port 0x4000-0x40ff mem
0xb4007000-0xb40070ff irq 20 at device 7.0 on pci6
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-F
DX, auto
re0: Ethernet address: 00:0a:e4:fa:d2:1c
re0: [FILTER]
pci6: <bridge, PCI-CardBus> at device 9.0 (no driver attached)
pci6: <serial bus, FireWire> at device 9.2 (no driver attached)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x1880-0x18bf mem 0x80000800-0x8
00009ff,0x80000400-0x800004ff irq 21 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Avance Logic ALC655 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0x18c0-0x18cf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd8000-0xdbfff,0xdc000-0xe1fff
pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1729182449 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <TOSHIBA MK8025GAS KA023A> at ata0-master UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4082N/HR02> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad0s4a
Loading configuration files.
kernel dumps on /dev/ad0s4b
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad0s4b as swap device
Starting file system checks:
/dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4a: clean, 156521 free (3153 frags, 19171 blocks, 1.2% fragmentation)
/dev/ad0s4d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4d: clean, 1918837 free (21 frags, 239852 blocks, 0.0% fragmentation)
/dev/ad0s4g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4g: clean, 245087 free (31 frags, 30632 blocks, 0.0% fragmentation)
/dev/ad0s4e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4e: clean, 404035 free (14659 frags, 48672 blocks, 0.7% fragmentation)
/dev/ad0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s4f: clean, 239641 free (1745 frags, 29737 blocks, 0.7% fragmentation)
Setting hostuuid: ea4efba0-def1-11da-81a4-d316a1188ce9.
Setting hostid: 0x5df5fbe7.
Mounting local file systems:
.
Setting hostname: kotik.kolatelecom.ru.
net.inet.tcp.blackhole:
0
->
2
security.bsd.see_other_uids:
1
->
0
security.bsd.see_other_gids:
1
->
0
security.bsd.conservative_signals:
1
->
0
security.bsd.unprivileged_proc_debug:
1
->
0
security.bsd.unprivileged_read_msgbuf:
1
->
0
hw.syscons.bell:
1
->
0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet 127.0.0.1 netmask 0xff000000
Additional routing options:
.
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Additional IP options:
.
Mounting NFS file systems:
.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/k
de3 /usr/local/lib/mysql /usr/local/lib/pth
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Clearing /tmp.
Creating and/or trimming log files:
.
Starting syslogd.
Checking for core dump on /dev/ad0s4b...
savecore: no dumps found
Initial i386 initialization:
.
Additional ABI support:
linux
.
Starting local daemons:
.
Updating motd
.
Mounting late file systems:
.
Configuring syscons:
keymap
keyrate
scrnmap
font8x16
font8x14
font8x8
allscreens
.
Starting cron.
Local package initialization:
.
Starting background file system checks in 60 seconds.
Mon Sep 22 15:22:42 UTC 2008
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub2
ums0: 16 buttons and Z dir.
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/2.00, addr 2> on uhub2