фряха на ноуте

[chd]

acpica во фре старый... у мну asus a7sv laptop с -CURRENT@i386 зажужжал нормально
только после прикладывания патча jkim@ http://people.freebsd.org/~jkim/acpica- ... 04.diff.gz
powerd стал рабоать прилично, а траблы были с корректным опеределением EST

к сожаленью мамка интеловая DP43TF даже с этим acpica криво рутит прерывания,
сижу на своей ws with interrupt storm

/me думает что чуваков из acpi команды нуна пинать чаще...

[Хостинг HostFood.ru]

Тарифы на хостинг в России, от 12 рублей: https://www.host-food.ru/tariffs/hosting/
Тарифы на виртуальные сервера (VPS/VDS/KVM) в РФ, от 189 руб.: https://www.host-food.ru/tariffs/virtualny-server-vps/
Выделенные сервера, Россия, Москва, от 2000 рублей (HP Proliant G5, Intel Xeon E5430 (2.66GHz, Quad-Core, 12Mb), 8Gb RAM, 2x300Gb SAS HDD, P400i, 512Mb, BBU):
https://www.host-food.ru/tariffs/vydelennyi-server-ds/
Недорогие домены в популярных зонах: https://www.host-food.ru/domains/

[Alex Keda]

пинай.
я всех пинаю кого могу - полезно, развитие идёт ))

[eswees]

По ходу железки тупят... dmesg хотя бы скинь для понимания, что у тебя там и как установилось

Код: Выделить всё

eswees# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE-200804 #0: Thu Apr 10 20:40:56 UTC 2008
    root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1400MHz (1393.17-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 469565440 (447 MB)
avail memory = 445489152 (424 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <ATI RS200M AGP bridge> on hostb0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0x98000000-0x9fffffff,0x90000000-0x9000ffff irq 11 at device 5.0 on pci1
pcm0: <Acer Labs M5451> port 0x3000-0x30ff mem 0xa0080000-0xa0080fff irq 11 at device 6.0 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms, generic modem> at device 8.0 (no driver attached)
cbb0: <O2Micro OZ711M1 PCI-CardBus Bridge> mem 0xa0180000-0xa0180fff irq 11 at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <O2Micro OZ711M1 PCI-CardBus Bridge> mem 0xa0200000-0xa0200fff irq 11 at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
pci0: <base peripheral> at device 11.2 (no driver attached)
atapci0: <AcerLabs M5229 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3800-0x380f irq 11 at device 16.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <bridge> at device 17.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0xa0300000-0xa0300fff irq 10 at device 18.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xa0380000-0xa0380fff irq 10 at device 18.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xa0400000-0xa04000ff irq 10 at device 18.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 5 ports with 5 removable, self powered
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x3001> mem 0xa0000000-0xa000ffff irq 10 at device 19.0 on pci0
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:08:02:d6:ad:48
bge0: [ITHREAD]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
sio4: <16550 or compatible> at port 0x3e8-0x3ef irq 3 drq 3 pnpid NSC6001 on isa0
sio4: type 16550A
sio4: [FILTER]
unknown: <PNP0c02> can't assign resources (memory)
Timecounter "TSC" frequency 1393169938 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <WDC WD1200BEVE-00WZT0 01.01A01> at ata0-master UDMA100
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
drm0: <ATI Radeon RS200 Mobility IGP 340M> on vgapci0
info: [drm] AGP at 0xa4000000 64MB
info: [drm] Initialized radeon 1.25.0 20060524
info: [drm] Setting GART location based on new memory map
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]
bge0: link state changed to UP
eswees#

[goodle]

У меня ноут Samsung R20. В образовательных целях ставил FreeBSD 7.0-RELEASE и всё нормально работало (видео к сожалению только через vesa).
Для, так сказать, "закрепления материала" решил апдейтнуться до 7.1 поставив всё с нуля. Ось встала замечательно и даже теперь ноут по shutdowh -p now действительно выключается и не приходится жать кнопочку питания! Грабли вылезли на Xorg-7.4.

Код: Выделить всё

X -configure

отработала, дав совершенно стандартный /root/xorg.conf.new

Код: Выделить всё

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  300   190	# mm
	Identifier   "Monitor0"
	VendorName   "CPT"
	ModelName    "1785"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon Xpress 1250"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

По команде

Код: Выделить всё

#X -config /root/xorg.conf

экран становится в сеточку и крестик мышки, вот только никакой реакции на клавиатуру и мышку! Даже Ctrl+Alt+Backspase не помогает. Приходится топать во вторую консоль Alt+F2 и давать команду killall Xorg
Перепробовал Driver "radeon" и "ati" на vesa ргуается

Код: Выделить всё

(EE) VESA(0): No matching modes
(EE) Screen(s) found, but none have a usable configuration.

# dmesg

Код: Выделить всё

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE-p2 #0: Tue Jan 27 12:34:51 VOLT 2009
    root@free:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz (1666.74-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 938016768 (894 MB)
avail memory = 908304384 (866 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, 1000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd8000000-0xdfffffff,0xd0100000-0xd010ffff at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424/2424> mem 0xd0200000-0xd020ffff irq 18 at device 0.0 on pci5
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:16:e3:f0:92:8e
ath0: mac 10.0 phy 6.1 radio 10.2
atapci0: <ATI IXP600 SATA300 controller> port 0x8438-0x843f,0x8444-0x8447,0x8430-0x8437,0x8440-0x8443,0x8400-0x840f mem 0xd0004000-0xd00043ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd0005000-0xd0005fff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0006000-0xd0006fff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xd0007000-0xd0007fff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xd0008000-0xd0008fff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xd0009000-0xd0009fff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0004400-0xd00044ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0300000-0xd03000ff irq 22 at device 5.0 on pci8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:77:35:ef:9c
rl0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xdc000-0xdffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Genius Optical Mouse, class 0/0, rev 1.10/1.00, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/SC03> at ata0-master UDMA33
ad4: 76319MB <FUJITSU MHW2080BH 00000012> at ata2-master SATA150
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
Trying to mount root from ufs:/dev/ad4s1a
umass1: <Silicon Power USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on uhub5
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <SPCC USB DISK 0.00> Removable Direct Access SCSI-2 device 
da1: 40.000MB/s transfers
da1: 962MB (1972223 512 byte sectors: 64H 32S/T 962C)

Код: Выделить всё

# uname -a
FreeBSD free 7.1-RELEASE-p2 FreeBSD 7.1-RELEASE-p2 #0: Tue Jan 27 12:34:51 VOLT 2009     root@free:/usr/obj/usr/src/sys/MYKERNEL  i386

Код: Выделить всё

#cat /var/log/Xorg.0.log
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/free:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.1-RELEASE-p2 i386 
Current Operating System: FreeBSD free 7.1-RELEASE-p2 FreeBSD 7.1-RELEASE-p2 #0: Tue Jan 27 12:34:51 VOLT 2009     root@free:/usr/obj/usr/src/sys/MYKERNEL i386
Build Date: 27 January 2009  02:41:42PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 27 16:02:14 2009
(++) Using config file: "/root/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81bcde0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:5:0) ATI Technologies Inc Radeon Xpress 1250 rev 0, Mem @ 0xd8000000/0, 0xd0100000/0, I/O @ 0x00009000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"

(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"

(II) Loading /usr/local/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.3, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "ati"

(II) Loading /usr/local/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 6.10.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "radeon"

(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 6.10.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ...
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000d0100000
(II) RADEON(0): MMIO registers at 0x00000000d0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(==) RADEON(0): Depth 24, (==) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x7942)
(WW) RADEON(0): R500 support is under development. Please report any issues to xorg-driver-ati@lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
	SubsystemVendorID: 0x144d SubsystemID: 0xc511
	IOBaseAddress: 0x9000
	Filename: br23022.bin 
	BIOS Bootup Message: 
ATI Radeon Xpress 1250 for Samsung/Hainan2                                  

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 333000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
(II) RADEON(0): Direct rendering not officially supported on RN50/RS600/R600
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 333.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(II) RADEON(0): Bios Connector table: 
(II) RADEON(0): Port0: DDCType-0x7e40, DACType-1, TMDSType-0, ConnectorType-1, hpd_mask-0x0
(II) RADEON(0): Port1: DDCType-0x7e40, DACType-0, TMDSType-0, ConnectorType-7, hpd_mask-0x0
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
 Monitor   -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x7e40
(II) RADEON(0): Port1:
 Monitor   -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x7e40
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "LVDS:ddc2" removed.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "LVDS:ddc2" removed.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.5.3, module version = 1.2.0
	ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit d8000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x3fff3800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x3fff3800 0x3fff3800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Textured video requires CP on R5xx/IGP
Output 68 disable success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x800 - 1408 816 0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x3fff3800 0x3fff3800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
freq: 68900000
best_freq: 68895111
best_feedback_div: 866
best_ref_div: 12
best_post_div: 15
(II) RADEON(0): crtc(0) Clock: mode 68900, PLL 68890
(II) RADEON(0): crtc(0) PLL  : refdiv 12, fbdiv 0x362(866), pdiv 15
Set CRTC PLL success
Set CRTC Timing success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
Output digital setup success
Output 23 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output 68 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x3fff3800 0x3fff3800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x00000000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Unblank CRTC 0 success
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear

Подскажите пожалуйста что не так я делаю? На 3D я со своей карточкой не претендую, хотя бы vesa запустить!

[paradox]

Код: Выделить всё

#X -config /root/xorg.conf

а какой wm вы используете?

[goodle]

а какой wm вы используете?

А никакой - голый Xorg

[goodle]

Смущают вот эти строчки в Xorg.0.log

(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0

Помогите пожалуйста новичку - пните в нужном направлении!

[paradox]

AllowEmptyInput is on

[goodle]

Похоже это проблема не столько ноута, сколько новых иксов, так что вопрос буду задавать в соответствующей ветке
http://forum.lissyara.su/viewtopic.php? ... 77#p135077

[Mox]

чувак, все работает нормально у тебя, только для современных иксов просто необходимы dbus и hald. И собирать иксы нужно тоже с ними. Просто когда ты стартишь свои иксы они не принимают команды от клавы, потому что этим должен заниматься hal через dbus, которые у тебя в этот момент не запущены.

Код: Выделить всё

echo 'hald_enable="YES"' >> /etc/rc.conf 
echo 'dbus_enable="YES"' >> /etc/rc.conf
echo 'polkitd_enable="YES"' >> /etc/rc.conf

а командами, которые описаны описаны в ссылке ты просто говоришь xorg`у чтоб он сам клаву с мышей искал и обшался с ними.

http://www.lissyara.su/?id=1355

Код: Выделить всё

less /usr/ports/UPDATING
................
................
20090123:
  AFFECTS: users of x11-servers/xorg-server
  AUTHOR: rnoland@FreeBSD.org

  If you are using an older xorg.conf several config lines are
  no longer needed and will generate warnings when X is started.
  RgbPath will cause X to fail to start, remove it from your config.

  [b]Server 1.5.3 also really wants to configure its input devices
  via hald[/b].  This is causing some issues with moused and
  /dev/sysmouse.  There are a couple of options for how to deal
  with it.

  1. Add Option "AllowEmptyInput" "off" to your ServerLayout section.
     This will cause X to use the configured kbd, mouse, and vmmouse
     sections from your xorg.conf

  2. Don't use moused.  If you want it to work with addon usb mice
     set this in rc.conf:

     moused_enable="NO"
     moused_nondefault_enable="NO"

  I'm working on fixing hald or the mouse driver or both.
..........................

[MASSER]

Подскажите, плиз, есть ли проблемы совместимости у такого ноута с FreeBSD? Планируется установить версию 7.1.
Ноутбук HP 6730s T4200 (2.00)/2G/250/DVDRW/WiFi/BT/FreeDOS/15.4" WXGA/Cam

[paradox]

проблему совместимости можно решить
если покупать ноут предварительно вставив диск бсд

[MASSER]

проблему совместимости можно решить
если покупать ноут предварительно вставив диск бсд

это было бы замечательно, но к сожалению, такой возможности нет. Заказывается не в своём городе.

[paradox]

ну тогда гугл
на предмест списка железа
может даже на линухе есть отчеты
и потом проверка поддерживаеться ли оборудование в бсд

щас все ноуты практически поддерживают бсд
исключения бывают когда сложновато бывает поднять либо сетевку либо вайфай

[manefesto]

где то был сайт на котором люди рапортовали об успехах установки на тот или иной ноут FreeBSD.
На вскидку не скажу

[kedr275]

Ноут samsung R560. Поставил Freebsd 7.0. При запуске иксов паник и в ребут. Посоветовали current, поставил заработало кроме wifi.
В винде определяется Intel wifi link 5100. фрюха не определяет. Пока ниче толкового по поводу wifi не нашел.
Была проблема с неработаюшей клавой в иксах
hald_enable="YES" в /etc/rc.conf помогло.
блютуз и камера мне нафиг не нужны, не пробывал.

[paradox]

Intel wifi link 5100

помоему еще нет в бсд
но что то проскакивало в рассылке бсд что ктото вроде пытаеься писать драйвер

но лучше pciconf -lvcb приложи по wifi
тогда возможно скажу наверняка

[myx]

Ноут Acer emachines E525, определяется все, кроме езернета, не поднимается даже через ndis, ждемc релиза 8ки...

[DROOPY]

Уважаемый paradox (или может кто ещё знает), есть шанс найти драйвер для этой wifi железяки? Под linux подошел драйвер ath9x, но нужно под FreeBSD 7.2-STABLE
Notebook: ASUS M50Vc

Код: Выделить всё

none0@pci0:3:0:0:       class=0x028000 card=0x10671a3b chip=0x002a168c rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    class      = network

---
И большой вопрос, как победить acpi_asus? Очень уж хочется заюзать кнопки регулировки яркости экрана. С наскока не получилось, понял, что `acpidump -dt` помочь должен, но как оттуда выудить нужные параметры?
---
ещё пара вопросов до кучи
по этому поводу можно не волноваться?

Код: Выделить всё

est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2b06000d2b
device_attach: est1 attach returned 6

И если ли драйвер для BlueTooth адаптера?

Код: Выделить всё

ugen1: <Broadcom Corp BT-253, class 224/1, rev 2.00/2.35, addr 2> on uhub2

[paradox]

а с каких пор атероуз незаводиться на бсд?

да и блютузы давным давно

[DROOPY]

а с каких пор атероуз незаводиться на бсд?

С тех самых, как чип сменился с 5xxx на 9xxx

да и блютузы давным давно

Я всё же расчитывал на более развернутый ответ :\
Сомневаюсь, что оно заведется, т.к. даже для win пришлось патчить стандартный драйвер от MS в части .inf файла, нужен пинок в сторону, что имеенно патчить для FreeBSD.

И плиз, не ипроигнорируйте вопрос про acpi_asus, как именно понять, какие парамтры заюзать?
Подозреваю что может помочь devd с логированием всего связанного с ACPI, но пока у меня тут без результатов

[paradox]

acpi asus гугл по форуме лисяры
где то уже обсуждалось
причем не раз

блютуз в бсд заводиться любой
все по хендбуку

насчет wifi посмотрю

[DROOPY]

acpi asus гугл по форуме лисяры
где то уже обсуждалось
причем не раз

верю, но моя вера мне не помогла, я только понял что да, действительно обсуждалось, и что я нашел, сводилось к тому, что дай вывовод acpidump -dt, а что именно и как там искать, я не нашел. Плиз, хотябы намек, дальше уж сам постараюсь

блютуз в бсд заводиться любой
все по хендбуку

пока спорить не буду, ушел читать хендбук.

[paradox]

большой вопрос, как победить acpi_asus?

Очень уж хочется заюзать кнопки регулировки яркости экрана

два разных вопроса
у многих регулировка яркости (наскоко япомню) фиксилась вообще по другому
и с asus acpi никак не связана
непомню вообщем
яркость меня никогда не интересовала

покупайте нормальные буки
где яркость никак не завязана на acpi
и управляеться средствамибиос ноута
и спец клавишами Fn+[Home | End]
как у меня

[paradox]

Код: Выделить всё

#define AR9280_DEVID_PCIE       0x002a          /* AR9280 PCI-E Merlin */

Код: Выделить всё

X:\...ath_hal\ar5416\ar9280_attach.c        DOS         24569     Кол
#undef ANTENNA1_CHAINMASK
}

static const char*
ar9280Probe(uint16_t vendorid, uint16_t devid)
{
        if (vendorid == ATHEROS_VENDOR_ID &&
            (devid == AR9280_DEVID_PCI || devid == AR9280_DEVID_PCIE))
                return "Atheros 9280";
        return AH_NULL;
}
AH_CHIP(AR9280, ar9280Probe, ar9280Attach);

в стеибле ненашел такого кода
это токо куррент поддерживает твою wifi
так что ставь его

хотя не исключено что у меня старенький cvs стеибл